DON'T WASTE YOUR MONEY

The Technology of Old Crossbows
4 followers
12 Video Views·Oct 19, 2025
DON'T WASTE YOUR MONEY
Comments are disabled for this video.
It has been a minute, but welcome back
to a Lancaster Archery Supply unboxing.
Jake ordered three random things off of Lancaster,
and this is the first one I picked out of a random hat.
We're gonna open this up, figure out what it is,
do an honest review on it, and use it.
Open, unbox, use it, review it.
A peep sight.
Is this supposed to be a standalone?
No, there's more to this one.
Keep digging.
Box number two.
Oh, this has gotta be what this.
This and that.
CBE Tactic.
What was the price point on this?
Throw it up on the screen.
Cheap, that's what I know.
Ultralight compact design, smart mount,
tool-less elevation gain, tool-less windage gain,
fiber management system for even brighter pins,
laser-marked hashes, .09 blade pins.
Available with three-pin housing
for right and left-handed archers.
Very cool.
This I'm super excited about too.
This is the new Hamski Raptor Peep.
So I've used these Raptors Peeps for a super long time.
They're on all of my hunting bows.
There's something about a standard peep sight like this,
like that one, there's nothing on the inside of it.
So the inside is perfectly flat and it's shiny.
It glares.
If you ever have your peep sight and you're like,
man, there's this big white glare on one side of it,
and it's kind of tough to line up the housing,
that's where these Hamski peep sights,
especially the Raptor Peep is great
because it has like baffling,
it has like rivets on the inside.
So you don't get glare.
It's similar to like a camera lens,
like on the inside of it,
like it's got anti-glare technology.
So the standard cheaper peep sights are fine.
They're lighter.
So if you want like a little bit more
like three feet per second speed,
this is a great option, but they have glare.
But this new Hamski peep,
which this is the deluxe peep system.
So it comes with three verifiers,
three apertures and an installation kit.
Looks like there's also a standard system
that does not have the verifier.
So a verifier is a little tiny lens
that you put in the peep sight that makes your pins clear.
If your eyesight is bad or just, you know,
you got dealt the wrong hand
and you cannot see your pins very well,
they're super blurry.
You can install a verifier and it'll clear them up for you.
So let's dive right in.
So it comes in this little travel case.
Look at that.
That's kind of cool actually.
Looks like we got three verifiers.
We got quarter inch, 7.32 and 3.16.
I always kind of land on the 3.16,
which is the smaller one for the UltraView housings.
It fits really good.
This is the peep sight.
That looks a little bit bigger than my standard ones.
If I get just a 3.16 and pop this out,
that is our little aperture guy.
And then we got this little,
this little, that's kind of cool actually.
To clip these, I'm guessing.
So let's start with the yellow and think yellow.
Based off of a clarifier is the least magnification
or like the least effects on it.
So we have this guy, I'm guessing that we go like this
and we push it in just like that.
Look at that, that was actually super nice.
That little clip thing is great
because a lot of times you're touching these
and messing them up when it's fogging up.
Okay, so now I'm guessing,
yeah, so we got threads on that side
and just baffling on the other side.
So screw this in.
This is a hunting peep.
This is like a premium style hunting peep
that allows you to mess around with it a little bit.
Similar to like a target peep
where there's tons of clarifiers and tons of apertures
and stuff like that.
You can swap them out.
This is kind of cool.
They have a tool on the backside of this
so you can tighten that down,
a little Allen wrench on there.
So you can tighten that down.
So now we have a yellow verifier,
yellow verifier in there in the 3.16 size.
So show you guys, that's a 7.32
and that's a quarter inch peep.
So you can see the size difference
and you want your peep sight
to fit just around your housing.
You don't want it so big
that there's a lot of room to float inside of that.
It's just a little tougher to line it up.
You want it to be exactly the correct size.
So unlike a, these crickets are unbelievable this morning.
Apologies for the crickets.
You want it to be just perfect.
The Ultrascope 3.16 is just about perfect.
We'll set this aside.
Fancy New Hampshire Raptor series.
Now this is our CBE tactic sight.
There we are.
We messed around with some lower price point sights
in the past.
We've done quite a few of them actually.
This one's super small, looks pretty well done.
The pins actually look pretty dang bright.
They have this clear little protective housing,
I guess, for the fiber,
so that the fiber when they route it
and everything gets exposed to sunlight.
So I'm guessing, yeah, just as I cover this,
cover it like that, not very bright,
and I release it.
I don't know if you can tell,
but it got a little bit brighter.
I don't even know if you can tell,
but it does get a little bit brighter.
All right, so let's look at this.
We pop this loose for the up and down.
Okay, so that's our up and down adjustment right there.
So it looks like there's a hand tightening adjustment,
which is probably in the sight in process.
It's just super nice to pop it loose,
slide it up and down.
There's no micro adjust,
it's just you loosen it and you're good to go.
But it looks like there's an Allen wrench there.
So when it comes time to really ream it down
in the right spot, you do that.
Left and right adjustment looks like the same.
Pop that loose, and then we got left and right.
Looks like these mounts to the housing
with these two little screws right here.
That's potentially they have different sorts
of mounting brackets for different bows
if you run out of windage or something like that,
I'd guess.
That's kind of neat.
It is just a side mount.
So it's not, it doesn't have bridge lock,
doesn't have picatinny, anything like that.
For the adjustment of the pins,
looks like right over here on this side,
we got three pins and three Allen wrenches
to coincide with them.
So you pop them loose, move them up and down.
No micro adjust, you just pop it and move it up and down.
Couple little dash lines for you there.
Sides out, that looks like it.
Very simple sight.
You do not have third axis,
but it looks like you do have second axis.
These two screws right here,
the mounting brackets itself look like they are oblonged.
So they can slide left and right.
So you pop these two loose
and then you'll be able to move this like that,
which is kind of nifty, but no third axis.
So unless I'm missing it, no third axis.
So that's one thing that you're not getting with this.
The vis ring looks pretty good actually,
the green all the way around it to help line it up.
That's nice.
Yeah, looks like a good old little sight.
So thinking about what bow we can put this on,
we're gonna kind of put it on everything.
Might even put this on the turkey bow setup.
So we don't have a peep in this right now.
I probably took it to put it on a different bow
and we got a UV slider on there, but we can take that off.
So let's start there.
Also looks like there's a light
that can get screwed in the top right here
to mess with the fiber brightness and stuff like that
for low light situations, which is kind of nice,
but it's not included.
They must sell it separately.
This thing does have some quiver bracket screws
if you want a quiver on it.
I don't know if the Matthews quiver
will work on this or not.
It looks like it's maybe slim enough that it will,
but that is a problem with these side mount ones
is that the Matthews quivers are so tight
that they don't work on them.
That's what it looks like on a bow, ladies and gentlemen.
Very nice.
Actually, it looks kind of mean, actually.
All right, we'll pop this off
and we'll put the peep sight in.
So on this Raptor peep sight,
there's actually two ways you can do this,
two different angles.
So these little string grooves right here,
there's two different angles.
There's a steep angle and a not-so-steep angle,
depending on axle-to-axle bows,
depending on drawing, stuff like that.
Your string angle changes.
And so it's kind of nice to be able to
have a peep sight line up 100%.
Oh!
Welcome back.
To have a peep sight 100% lined up in the right way
and you're not looking at it top-down or bottom-up
or vice versa.
So you can kind of mess with that, go back and forth
if you want to do that.
I will tell you one thing.
This is a honkin' old peep sight.
Like, that's a big peep sight, bigger than the Raptor.
Because, like, there's a Raptor in this one.
You can see the size difference there.
It's pretty, it's almost double the size
of the old Raptor peeps.
Which, you know, whatever.
If you're worried about speed or anything like that,
it's like, I don't really worry about it too much.
But it is a big peep sight.
Like, large.
So I don't love that.
But it is super nice to be able to change them out
and put the clarifiers, or the verifiers in.
You probably could put a clarifier in here too.
If it's the right size.
All right, we'll tie it in.
We already have our up and down ties.
We know that my peep sight goes in this spot, so.
Let's do little ties around it so it doesn't fly out.
Normally I do a knot on the top, knot on the bottom,
and then finish it off with a square knot back on top.
And then, a lot of times I glue it,
but I'm not gonna glue it this time,
because I'll probably end up swapping this out
for another bow at some point.
Peep sight installed.
I will need a grip on this bow.
Don't know where it went.
Look at that, one appeared.
Now, I'm going to roughly get this sight
to where I think it needs to be, left and right.
So, what we're gonna do, pop that.
Let's go right in.
Okay, that's gonna be really close.
So, we'll just lock this in with our fingers.
All right, CVE tactic, wrapped repeat.
On the bow, in 10 minutes, literally, super easy setup.
We're gonna go to eight yards right here,
and I'm just gonna shoot right here,
and then it'll be about where my 20 is at.
Okay, so my eyes do not require a verifier,
because I can't see anything right now, it is so blurry.
That was incredibly blurry.
So, let's try a different one.
I don't need one, so I'm just kind of messing around
and show you guys that, that, let's try this one.
All right, let's try it again.
Let's see if this verifier I changed out
does anything different.
Still very blurry, but better.
All right, let's just swap out the last one.
Verifiers, not to make fun of old people,
but older people that can't see close as you get older,
you need reading glasses and stuff.
That's when verifiers are super nice.
I do not have the problem, if anything,
of the opposite problem, I can't see far.
Actually, fun fact, have prescription glasses
that I never wear, and I'm very blind at beyond 50 yards.
Okay, that's the least blurriest one,
but verifiers are definitely not for me.
What we're gonna do, we're just gonna pop out
these verifiers, but if you're the people in the world
that your pins are so blurry you can't see them,
verifiers, check them out.
There we go.
Right in the middle.
I think the second axis is pretty far off
based on how it feels, so let's mess around with that now.
Okay, so my bubble is way out the right,
so the hamski, little leveler is level,
and the sight is way right, so we are going to,
so it needs to go up.
Let's try it again.
Honestly, that was perfect.
Within the lines, it maybe is not 100%
target archery perfect, but what we're doing,
that's perfect, really wasn't that bad to change that.
It feels like they maybe have some little spacer,
plastic, little soft plastic washers in there,
so when you crack it loose, it wasn't loosey-goosey,
which is super nice.
We stepped outside to see how bright these pins are,
and it is kind of almost too bright.
Like, it is like wowsers, and they're 19,000 pins,
and they look like 40,000 pins right now
with how bright they are.
It'd be nice if they had a little cover
or something over this, so you could kind of teeter it
on and off, the brightness, but we'll see how it looks
at full draw.
Sometimes looking through a peep sight, they dim down.
I don't know how far we are, but I know where my Tony is,
and that's probably, middle pin's probably close.
Close enough.
Yeah, too bright for me.
To be, if I wanted to shoot past 60 yards,
it'd be really tough, because of how bright these are,
because it makes the, like, starburst, and way too much.
But, for a guy that's 20, 30, 40, within 50,
this is just a three pin, and honestly,
it's gonna be totally fine.
I mean, for a 20, I mean, this would be like a great
20, 30, 40 pin setup for brightness.
I mean, they're clear, the posts are good.
Second axis, actually, is perfect.
Peep sight looks really good.
I mean, I'm used to the Raptor peeps,
but we got no shininess.
We got a little black everywhere around this peep sight,
which is what I love.
I hate the glare.
The glare of what some of those other peep sights do, so.
I like it a lot.
All right, CBE Tactic, and the new Hamsky Raptor kit
can include the verifiers, but you don't need the verifiers.
Three different sizes of peep sights.
Both are kind of cool.
This is a great budget sight.
You know, if you just want something that seems,
I mean, everything is machined, aluminum.
The housing potentially is plastic.
This does look plastic, but for a cheaper sight,
it does fine, it did good.
It's sighted in.
Seems like everything's gonna lock into place and be good.
Second axis actually was pretty good.
Pin adjustment's fine.
You got your quiver.
The only thing this is lacking
is obviously micro-adjustability everywhere.
More pins to shoot further distances,
or a sliding sight to shoot further distances,
and third axis.
So it's missing a lot, but for a,
if you're gonna shoot 20, 30, 40,
you're a bow hunter, you just wanna get into it,
fantastic option.
And then also the Raptor set of peep sights.
I've ran Raptors forever, I love them.
So I definitely advocate for that.
The only con to this setup
is how they made it a little bit bigger,
but it's really not that big of a deal.
So thank you all for watching.
Make sure to check these out
in the link below in the description.
And we'll see you on the next one.
