Potato🥔 planting by Plantcoaching with Puma power | CTF 3.20m

Agriculture
95 followers
Welcome to a new video on the AgriFoto YouTube channel. In this video we see how potatoes are
being planted and how the soil is being prepared beforehand. This is done by PlantCoaching,
a Dutch farming company that specializes in growing potatoes destined for fresh cut french fries.
These are washed, packed and sold worldwide to outlets of fast food chain Five Guys.
First a fine seed bed has to be created for the potatoes.
This is done using a five meter wide Baselia rotary hook tying cultivator
on the back of a Case IH Puma 210. This tractor does not only have a distinctive exhaust note
but also looks extremely impressive on its all-round dual wheels. Achieving the lowest
possible soil pressure is very important so the ground won't be compacted. The field was
harrowed first to level the soil create some tilth. After a single pass with the bed tiller
it is fine enough to plant the potatoes thanks to the use of RTK GPS. The driver can skip bouts
and make wider turns although the individual brakes are needed to steer the tractor on its
is planting innovator potatoes using a Medema structural 4000 belt type planter.
Four 75 centimeter wide rows are planted. These will later be ridged up in a separate pass which
will help to suppress weeds. Both the tractor and planter are steered using RTK GPS from Raven.
All tires are fitted with a central tire inflation system which means that the tire pressure can be
reduced to 0.8 bar in the field. The wheels are spaced out to a track width of 3.20 meters
so the potatoes can grow in undisturbed soil. This will improve rooting. The tractor tires
are 380 slash 95 R38 on the front and 480 slash 95 R50 at the rear. Thanks to the bar axles there
is a lot of space underneath the mud guards. Air tanks have been mounted here which act as a buffer
for the tire inflation system. The planter first applies a dose of granular fertilizer in a narrow
band where the potatoes will be planted. Cultors make a small furrow in the soil where the seed
potatoes are dropped into. Two discs form a small ridge to cover up the potato. This ridge will warm
up quickly so the tuber will start rooting very quickly. This belt planter uses so-called snares
to cingulate the potatoes. The big advantage over a cup planter is that it can handle all seed sizes
without having to make much adjustments. The elements are fed from the central tipping hopper.
This is all sensor control. Two front tanks at the front of the tractor feed a spraying system
that can apply crop protection chemicals to the potatoes just before they are planted to prevent
diseases. The hopper is filled using a Merlo telehandler that can fill the three ton hopper
with a single bucket load. In the cab the driver can monitor the planter on a terminal and control
each element. There is a display for the GPS steering and the steering axle of the planter.
This field is almost finished and the driver is doing the scoots as the field is not parallel
to the road. In September or October these potatoes will be lifted. They can be stored
for almost a year and are washed, graded, packed and delivered on the customer's demand.
We hope that you have enjoyed watching this video of potato planting in the Netherlands.
This voiceover has been AI generated to add information to this video
explaining how it is done and why it is done. Please let us know what you think of this video.
Don't forget to like and subscribe to help us reach 100,000 subscribers.
Thank you for watching and we hope to see you again soon with the next video. Goodbye!
