Unique modern farming technology in the Netherlands | Planting & harvesting | Float Control CTIS

Agriculture
95 followers
Float Control is a new supplier of central tyre inflation systems,
but with years of experience in the Netherlands, Europe and North America.
Based on the experiences with existing tyre inflation systems,
we seek to develop a system that was both easy to use and simple to install.
Float Control is the result of many years of experience in the field
and is a brand of Dutch tyre supplier Zoutwest Bondum
and is the result of many years of experience in the field.
Farmers and contractors are increasingly experiencing the advantages of using a tyre
inflation system. Weather patterns are becoming disrupted with longer periods of drought followed
by heavy rainstorms. The time window for field work is decreasing. With a central tyre inflation
system, you can adjust your tyre pressure to suit the soil conditions. This reduces
soil compaction and ultimately improves your crop yield. Especially when carrying out road transport,
using a tyre inflation system can help to improve fuel use and reduce tyre wear.
In this video, we visit different farmers and contractors in the Netherlands that are using
the Float Control system on their tractors and self-propelled sugar beet and potato harvesters.
Even though conditions during harvest 2025 were dry, it is still important to prevent
soil compaction. Modern machinery often has a considerable weight. VF and IF tyres help to
reduce compaction, but they can only be truly put to use when a central tyre inflation system is
being used. Our first stop is in the northeast of the Netherlands. Contractor Speelman is lifting
sugar beet with their Holmer Hextrack 12 row harvester on a field of heavy clay soil.
Its six Michelin VF tyres have all been fitted with a central tyre inflation system.
The company mounted it themselves and also added a separate compressor to quickly inflate the tyres
for road transport. This can now be done in a matter of minutes. A buffer tank has been integrated
on the machine. Speelman fitted a Trimble RTK GPS system to their machine, which is also an
ISOBUS display. The Float Control system can be controlled from this screen. Here, the left and
right hand side of the machine can be controlled independently from each other. This means that
the two wheels at the front on the left side can run at a slightly higher tyre pressure,
as the unloading elevator is located here. This prevents damage to the tyres.
Pressure levels range from 1.6 to 1.8 bar across all tyres. This leaves a perfectly
level finish, which is directly ready for primary soil cultivation or direct drilling cereals.
When drilling crops, the right tyre pressure is of great importance.
Here, winter barley is being sown by Nova Farm, a large-scale arable farm in the southwest of the
country. Their Fendt 724 uses an external compressor to quickly adjust the tyre pressure.
The 5-metre-wide Kuhn Power Harrow and Disdrill is a considerable weight,
and with linkage-mounted implements, the right tyre pressure is even more important.
Thanks to the ISOBUS controls, all adjustments can be made via the Fendt 1 terminal,
which reduces the need for extra screens in the cab. The result is a level seedbed,
which gives an even emergence of the barley. This is an advantage for the following weed
control and ultimately can result in a higher yield. In the south of the country,
farmer Tommy Hullock is also drilling cereals today. Both his new New Holland tractors have
been fitted with a Float Control CTIS. His T7245 tractor is ripping up the beet field
with the Alpego Cultivator. By lowering the tyre pressure, the Bridgestone tyres have the
maximum grip. A separate terminal in the cab is used to control the pressure levels.
Different levels can be created and saved for both field and road modes.
The second tractor, a similar T7210, controls the system via the Intelliview terminal from the
tractor itself. Both tractors have Float Control's single-box solution on the right-hand side of the
cab. All valves and electronic controls are located in a single, rugged steel box. This
makes it easy to install and allows a tidy system without lots of wires and lines running along the
tractor that can cause issues. A lot of testing was carried out to use the most durable components
that cause a minimum of downtime. Even when the rims have small contamination in them,
the system can handle it. A third blue tractor, which might already be described as a modern
classic, is busy levelling a field with a scraper box. This is heavy work where lots of grip is
required. That is where the Float Control system comes into its own. Here the basic system has
been installed, which uses manually controlled valves on the outside of the cab. These are
conveniently placed at the front of the cab. As the tractor does very little road transport,
it is both an easy-to-install system and cost-effective.
Modern agricultural tyres come at a considerable cost these days.
Farmer Rick de Lange treated his John Deere 7430 with a new set of Michelin boots.
The tractor was meanwhile upgraded with a Float Control system to control the pressure of the
650-85R38 tyres. Winter wheat is sown in a single pass, using a subsoiler power harrow and drill
combination. This requires a lot of pulling power and its mounted configurations also put strain on
the tyres when turning on the headland. A central tyre inflation system is not only a useful addition
on arable fields. Contractor Dick Clark fitted the system to the Massey Ferguson 7S165 tractor,
which is used for jobs such as picking up grass silage. These are low-lying peat fields where
wheelings can be an issue, especially during spring. The grass is saved by means of the correct tyre
pressure. When travelling from the field to the farm, the pressure can quickly be raised to reduce
tyre wear. Contracting company Meneger, located in the east of the Netherlands, harvests potatoes
across a range of different soil types. Tracks were previously favoured when harvesting on marshy
fields, but these tend to have extremely high running costs. On top of that, a maximum road
speed of only 15kmph was possible for this grim Varitron 470. The brothers therefore invested in
a set of flotation tyres and CTIS, which in practice delivers an equally good result.
By lowering the tyre pressure to 1.2 bar, the footprint is greatly increased and the weight
is spread over a greater surface. This also leaves less ruts in the field and is more practical for
road transport. Their brand new Holmer T530 Sugarbeet harvester also received a CTIS system
from Float Control. It is busy harvesting one of its first fields. Thanks to crab steer and its
large flotation tyres, the weight is spread equally across the field, leaving a perfectly
level finish. The potato harvester uses the manual control system, but the Holmer has been fitted
with the Isobus variant and a separate terminal in the cab. The front wheels run at 1.5 bar and
the rear at 1.7 bar. More and more farmers and contractors are experiencing the significant
advantages that a central tyre inflation system can bring to their operation. With available
working periods becoming ever shorter, it is important to carry out field work at the right
conditions. By always ensuring the right tyre pressure is used, the best possible situation
is created for the crop to grow and soil compaction is prevented. If you'd like to know more about
Float Control and which system is suitable for your tractor or machine, get in touch and receive
free advice from our experts.
