I Bought A FILTHY Ford Festiva For $800…

Ex Used Car
15 followers
14 Video Views·Oct 14, 2025
Guess who just bought another cheap car from Facebook Marketplace?
That would be me. It's another little economy car from the 90s,
and even back then it was considered pretty terrible. I haven't yet picked it up,
so I think it's time we go collect it and see if my $800 Australian dollars was well spent.
Old, slow, filthy and cheap. This car has everything a YouTuber could ever hope for.
And being from a deceased estate, it hadn't been driven in well over a year.
Which really shows given the amount of dirt that had settled on the paint.
The Ford Festiva was one of the cheapest cars you could buy in the late 90s here in Australia.
And while it has a Ford badge, it is actually made by Kia
in South Korea. Often ranked as one of the worst cars of its time.
Has the last 26 years been kind to this cheap little subcompact? Eh, I'll let you decide.
Yes, the one I've got thankfully did include air conditioning as well.
So here we have the Ford Festiva. It's not in the greatest of shape you could say.
But first of all, we're going to have to go put some fuel in it because this thing
is almost empty. I put five litres in the other day when I went to go check it for a second time,
but it is still almost empty. So let's hope it makes it to the fuel station at the very least.
Well, here we go. I just realised this thing doesn't even hold up.
I'm a little scared, I'll be honest. It's a little bit rough, but mechanically it seems
to be fine. It's just going to need a lot of detailing. You know,
things are a little bit sticky. So let's start it up.
Okay, so far, so good. Let's go get some fuel.
Oh my God, the window's stuck. All right, that'll do.
All right, let's go.
These windows are going to need a good clean. Holy ----.
Oh my God, these windows are going to need a good clean.
Transmission shifts pretty good, I must admit.
The speedo is kind of moving. I think it works, it's just not particularly accurate, I think.
All right, come on, come on. Oh God, turning without power steering. Oh God.
I don't want to put the AC on yet because I know that the vents are absolutely...
My hands are so sticky too. Oh God. Oh my God, why?
I'm going right. I'm going right. There we go.
Okay, we made it. Far out. Okay, let's get some fuel.
Oh, at least the petrol door still opens.
All right, we're going to put some of this in first because
the fuel system can't be particularly clean.
Oh yeah, it doesn't smell very nice, I must admit though.
1191, here we go. How much fuel? Come on. Why is it not working?
It's put in 800 mils and then nothing.
It turns out that I had to use the next fuel pump as that one was faulty.
All of the tyres had a similar level of flatness,
but I think they'll be all right since they have plenty of tread.
Okay, we've got fuel, we've got air, and then most importantly,
a steering wheel cover because this steering wheel is sticky.
We're going to go just give this a quick wash, I think, because it's filthy. It's too filthy.
So let's get out of here. Yeah, that turns way easier now that it's got some air. Oh my God.
This is different. I mean, the windows are so filthy still.
After using a nearby tap to wash the sticky steering wheel off of my hands,
it was time to give this car a much needed clean off.
In some ways, I'm glad the seller hadn't tried to clean up the car before selling it,
as I find it quite fun cleaning up old cars.
The white paint did a fairly good job of hiding just how filthy this car really is,
and I think it'll take many cleans to get the paint nice and shiny.
One thing to note about these Festivas is the automatic transmission only has three speeds,
all of them slow. Reviews at the time noted that you should opt for the five speed manual,
which will be far more suited to highway driving.
And this model does have a tiny spoiler, which likely does nothing for downforce,
but gives years worth of dirt a place to hide.
Our first pressure washing did help, but there's still a lot of dirt on the surface.
A nice sponge bath is in order, I would say.
Using some heavy duty car and truck wash seems to make quite the difference.
Even now, there's still gunk and leaf litter coming out from the door seals and body work.
Thankfully, there's no rust on the frame and only a few small blemishes to the paintwork.
The paint on this car has actually held up pretty well given the level of neglect
and protection, but you shouldn't treat your online life with this level of neglect.
And that's where today's sponsor Surfshark VPN comes in handy.
Be it shady email and phone text links or even unsecured public Wi-Fi networks,
Surfshark alerts you to potential threats and tunnels your internet traffic through secure servers.
Surfshark VPN found that my email address had been leaked in 16 different database breaches,
which makes a whole lot of sense given the sheer volume of spam emails I get every single day.
A feature that I found pretty cool is the alternative ID,
which allows you to create a proxy email address, masking and hiding your real details.
Not only does it encrypt your internet traffic,
masking your real IP address, it enables you to appear as if you're anywhere you want in the world.
Getting around various geo restrictions.
This can be very helpful given the sheer number of streaming services with region specific content.
Surfshark VPN is not just for desktops.
It's also available on iOS and Android, giving your phone that same level of protection.
Your subscription can be used on an unlimited number of devices.
Great if you're traveling or have family that's always online.
With over 3,200 servers across 100 countries and additional features such as antivirus,
Surfshark VPN is a great tool to have to browse the internet safely and securely.
Why not try it today?
There's even a 30 day money back guarantee.
Head over to surfshark.com forward slash pcivrivpn
and use my promo code pcivrivpn to get four additional months of Surfshark VPN.
And the few minor dents don't lower its value too much since it's worth bugger all to begin with.
Being able to see out of the windows properly is pretty important to me,
so I'll give the glass a good wipe off.
The gas struts also aren't holding up the boot while it's on our sloped driveway,
so a clamp is very much required.
As you can see, it's pretty foggy.
Apparently the previous owner who had passed away was a smoker,
meaning all the gunk is likely tar from cigarettes.
Ew.
And the car didn't smell too bad,
but that's likely due to it sitting with the window open for well over a year.
Just look at all that gunk.
Powering this small car is the Mazda B3 1.3 litre 8 valve engine,
which required a new battery so I used one I had lying around.
The radiator was replaced at some point and the coolant looks fine.
Thankfully you can easily check the transmission fluid,
which looks good, a nice red colour.
The brake fluid could do with a change,
so I'll repeatedly drain and fill the reservoir with new fluid over the next few days,
because I'm too lazy to completely flush the system.
To make sure my hands don't melt onto the steering wheel,
I fitted the cover which will help with the grip necessary to turn a car
without power steering at low speeds.
And before working on the filthy engine, I wanted to give it a clean off.
With some of the sensitive components such as the distributor and battery covered,
I sprayed on some degreaser,
and after waiting a few minutes for the grease to lift,
it was time to use some engine cleaner followed by a high pressure spraying.
It's best to avoid spraying directly into the spark plug cylinders and electrical connectors.
If this was a car of any value or importance, I would have covered a few more areas,
but at the very least it appears far cleaner now,
and after waiting a few minutes I tried cranking it over.
It didn't seem to like where the water had ended up.
But after drying off the engine a bit more, it started fine,
and the insane amount of wind likely helped dry it out a bit I'd say.
And not all the lights were working, yes even before I sprayed the engine bay,
with the front indicator being out.
The main headlight globes were also in need of replacing.
At the rear, all of the lights were functional thankfully.
The right indicator flashes faster to alert you that one of the globes is out.
The front indicator housing is held in with a single phillips head screw,
and with a bit of fiddling it comes out easily.
I got a whole box of globes for only 84 cents.
The old globe appears to be somewhat corroded,
and the orange coating had entirely come off,
but it turns out that the new globes weren't the correct ones.
So I'll have to source the correct one later,
and simply cleaning off the contacts didn't get the original globe working.
Removing the main H4 globes is a little bit fiddly due to the lack of space,
but I was able to get this side out.
The other side came out fine,
however I managed to drop the new globe into the headlight itself.
Whoops!
And I put my faith in this little magnet thingy,
and yes the operation was eventually successful.
Now both of the headlights have working parkers, low as well as high beams.
Since this car came with no service history,
it was very much time to do an oil change,
getting the car up on some ramps for better clearance.
I would love to have a car hoist,
however I don't think Sabrina would like that,
and it wouldn't fit in our garage.
With the oil cap and dipstick opened up,
I cleaned off the oil and grease surrounding the drain plug.
The 19mm bolt was on there fairly tight,
and when the good tug it did loosen off.
What does the oil within look like?
Honestly not too bad,
and it hadn't leaked out while sitting for over a year.
What mileage was it last changed at?
Who knows?
Perhaps the oil filter will have a date on it.
It's fairly easy to access,
but it's on the thread pretty tight,
and worst of all,
I don't have a filter wrench on hand,
and after a while I was able to get it off though.
If I'm reading that date code correctly,
this was made in April of 2022,
and given when the owner passed away,
it likely saw around a year's worth of driving.
With some oil on the new filter's seal,
it was time to put it on.
I made sure to align the thread correctly,
as I would hate to cross thread the filter,
or worse,
damage the thread on the engine side.
I did it up as tight as I could by hand,
which should definitely be enough.
How much oil came out in the end?
Just under 3 litres.
The capacity of this engine is supposedly around 3.6 litres,
so I'll put in just 3
and see where it sits when it's back on flat ground,
and given that it's a fairly high kilometre engine
at 249,000 kilometres,
some 20w50 is going in.
I chose to use a measuring jug for greater accuracy.
I'd also recommend using a funnel to avoid spilling the oil.
The 3 litres gets it fairly close to the fill mark,
so it's time to start it up and see what happens.
Almost instantly, the oil pressure light goes out,
meaning it is flowing correctly,
and very cautiously I reversed off of the ramps.
It's always a bit scary doing this,
especially without someone spotting you.
An oil change is never complete
until you put the windshield sticker on.
The old one had no legible letters,
as it had clearly been sitting out in the sun for a long time.
A bit of eucalyptus oil helped to soften the sticker residue,
and some of it was stuck on there pretty well,
so I just thought,
I'm just going to put the new sticker over it.
The paint being white makes touch-up very easy.
I have no shortage of white automotive paint to dab on here,
and once this dries, I'll go back for a second coat,
because some of these scratches were very deep.
The rest of the interior could do with some attention as well.
There's no shortage of crumbs.
I have no idea what this blue stuff is in the boot,
but when touched, it basically turns to dust,
so I was sure not to breathe that in.
There also appears to be a spare wheel in the boot.
I'll have to check if this is usable later on.
The side mirror could also do with some attention,
as the duct tape isn't holding it on too well anymore,
and with it sitting correctly,
I shoved in a heap of super glue
and held it on with black electrical tape,
which matches the side mirror far better.
Another item that's worth replacing is the old air filter,
which is easy to get access to with the airflow sensor removed
and the air hose loosened off.
It can then simply be lifted out,
and since there's a bit of debris in the air box,
I decided to vacuum it out.
While the old filter wasn't in horrible shape,
a new air filter is cheap, so why not put one in?
I thought I'd also check the spark plugs,
but at the time of filming,
I didn't realise that you had to twist the plugs
while pulling outwards.
And pretty much every surface in this car is filthy,
which isn't surprising given it belonged to a smoker.
This is clearly going to take several passes
to make properly clean.
What's in the boot well?
A small scissor jack, in good condition,
a large bolt, possibly to keep said scissor jack in place,
a very old bottle of automatic trans fluid,
and sadly, the wheel in here has a huge screw in the thread.
There is also what looks to be a toolkit,
however, that transmission fluid had leaked all over it.
Thankfully, it doesn't look like water
had been pooling in here,
which can cause rust if left to sit for a long time,
and after wiping out all of the debris and transmission fluid,
the wheel well is clean once again.
I figured now is a good time to test out the scissor jack,
which is designed for emergency tyre changes.
Thankfully, the tyres on here don't seem to have any flat spots,
even after the car sat for a very, very long time,
and something that hadn't held up too well
are the wiper blades.
They're actually starting to rust.
These cheap ones will definitely be an improvement,
and I had to find the right clip,
which the new blades thankfully included,
and given how much time this car spent out in the sun,
it's not surprising that the rubbers had gone bad.
At least the glass on this car shows very few signs of scratching.
My father brought over his trolley jack,
and we checked the other wheels.
This one needs some adjusting.
Most likely, the brake pad is gripping the rotor a bit too much,
or the rotor is slightly warped,
and be sure that your handbrake is on while doing this,
and that you use a chock behind the rear wheel.
The rear left bearing is fine for now.
Let's see how the rear right is holding up.
The bearing seems to be fine here as well,
but there is a bit of play, which can be adjusted.
I've never seen this done before personally,
and underneath this little centre cap is a pin that you can remove.
With it straightened out, it can be yanked out of the hole.
This nut in the centre is actually all that holds the wheel on,
which also holds the bearing in place,
and now the whole wheel simply comes off,
giving us a good look at the rear drum brake,
which has a reasonable amount of tread left on it.
We plan on replacing the rear wheel bearings at a later date,
but for now, this is fine,
and with the handbrake back on, we can let it down nice and gently.
My father gave it a test drive, and it seems fine for now,
and we'll have a go at adjusting the front brake pads soon,
and for such a low-end 90s car, I was expecting it to be worse.
Another area I can improve are the fogged over headlamps.
This time I made sure to buy some masking tape
to help protect the surrounding areas.
Not that it really matters given the quality of this car though.
With the surface clean and dry, I began scrubbing with the abrasive paste.
Several passes are recommended for greater effect.
This sands off the yellow plastic, and now the sealing spray can be applied,
which will make the surface clear once again.
This should keep the headlights nice and clear for many months,
however, you will eventually have to do this again.
And once again, I thought I would try tackling the stained front seats.
Initially, I wondered if the previous owner had died in the driver's seat,
however, I found out that wasn't the case.
I found cleaning the gunk off the dashboard worked pretty well with some eucalyptus oil.
Still, I'll have to do a few passes,
as whatever's on here is really baked into the surface.
I thought I could remove this large scrape with some cut and polish,
however, that had minimal effect,
likely requiring some touch-up paint to get looking better.
And while it isn't the neatest way to do it,
I simply used a q-tip to go over a few areas where the paint had began flaking off.
And since the seats were completely beyond hope,
I went and bought the cheapest seat covers I could find.
These seat covers didn't fit perfectly,
and I may have actually slightly ripped them,
getting them on around the very wide headrest.
Clearly, these were designed for seats with detachable headrests,
but, eh, this is a definite improvement.
Another improvement this car needs is a functioning front indicator bulb,
so once again comes out the light assembly.
This time, I got the correct bulb with pins that will fit in the housing,
so I put in the new globe.
Let's see if that fixes it.
Nope, still nothing.
Perhaps the housing is bad?
I tried the old globe in the opposite front connector,
which actually worked,
and the new globe also worked in that connector.
Perhaps some corrosion is the problem after all.
Time to put some cleaning vinegar to work.
This is great for removing corrosion,
and I figured I'd do this on the working indicator side
since it did look quite dirty as well.
Finally, some success.
The new globe is working in the driver's side connector.
Now we have every light on this car functioning as it should.
This is now becoming a vehicle I would happily drive around without too much worry.
There was a little bit too much coolant in the reservoir,
so I pumped it out.
Don't drink the forbidden juice.
A one thing that is still bothering me is the fuel economy.
Around 11.6 litres per hundred if I calculated that right,
which is horrible.
There are many possible causes,
and my dad suggested the oxygen sensor could be going bad,
and it turns out it wasn't even connected at all.
That's without a doubt the problem,
causing the car to run rich.
But I'll also change the fuel filter since it could be partially clogged.
And safety first as always.
A clogged or partially clogged fuel filter can lead to poor economy
as well as stalling at idle,
which had actually happened once a few days before.
I slowly removed the top hose,
relieving any fuel pressure that may still be present,
and I was sure to let it sit for at least several hours before doing this.
The clamp on the input side underneath was a little bit harder to get access to
as I soon realised.
And I figured I could jam some Blu-Tack in the top
to stop all of the residual fuel from pouring out when I disconnect the bottom hose.
And I've never done this before,
if that wasn't already obvious.
And after much wiggling, I was able to get the old filter disconnected,
getting a bit of fuel on my ungloved hand in the process.
With the clamps in place, the new filter is ready to work.
And the next morning, I started it up.
The first attempt...
It almost started!
And once the fuel was passing through the filter and had enough pressure,
it started fine.
The timing belt also looks absolutely fine.
No signs of cracking.
One of the last things I wanted to do in this video was get the oxygen sensor working.
And since it's only a single wire,
I thought I could simply splice them back together,
which should create a fairly strong electrical connection.
And with a dab of super glue and a ton of electrical tape,
I covered the bare wires.
After learning how to unplug the spark plug leads,
I thought I would check the plugs within.
However, my 21mm socket is a bit too thick for the spark plug cylinder.
I guess the old plugs are staying in for now.
And I'll have to find a thinner tool to complete that job.
And does the car run any different with the oxygen sensor connected?
Well, from a cold start, it definitely smells different.
And has the fuel economy improved?
Thankfully, it has.
It's not running so rich anymore.
And acceleration is far less jumpy,
likely due to it finally having the correct fuel-to-air ratio.
This is really as basic as a car can get.
No airbags, no ABS, no power steering.
That simplicity does have its advantages,
with most of the maintenance items easy to do yourself.
And don't let that small size fool you,
with the back seats folded down, there's ample room.
Easily fitting in two large broadcast camera kits with space to spare.
And Millie loves sitting on the back seat as we took her to the dog groomer.
Thankfully, someone had upgraded the car stereo,
and it works straight away with my modern iPhone.
Is it a safe car?
Oh, God, no.
I'm sure it would fold up like a sardine can in an accident.
But will it get you from point A to point B reliably?
Well, with some continued maintenance, absolutely.
And with any luck, this cheap little nugget will be on the road
for many more years to come.
And one last thing before I go.
I thought I would try patching up the ruined sun visor.
Not only is the inner foam disintegrating into a fine powder,
the arm no longer holds the weight of the sun visor itself.
And to stop the foam flaking off even more,
I dabbed a bit of super glue onto the surface.
You really do not want to breathe the foam dust in, that's for sure.
I sliced into the bracket, revealing that it was simply loose.
Clamping the metal down in a few places seemed to stiffen up the hinge.
And a few zip ties wouldn't hurt either, I thought.
Last of all, I taped up the exposed foam areas and gave it a quick spray paint.
It's now functional once again.
Definitely a cheaper alternative to paying $79 for a replacement sun visor.
Anyway, thank you very much for watching.
I have a really good time working on these car videos.
I don't know why, it just excites me.
It's a lot of fun to do.
And hopefully, I'll be able to do some more in the future.
I always say, like, I'll probably never do any more.
But, well, here I am.
What is this, like, the 11th car video I've done, maybe?
I just keep doing it.
I've got a problem.
Please help me stop.
Well, anyway, just watch the videos and make it worth my time at the very least.
Thank you very much for watching and I'll see you in the next one.
