“治癒”人心的洗車視頻 Specialized S-Works Enduro

落基山下
22粉絲
8 次觀看·2025年10月13日
Spring has sprung, and that means for a lot of us in the Northern Hemisphere, that riding season is finally starting.
Luckily, here in the PNW, specifically Vancouver, BC, we can ride year-round.
But the winter months aren't exactly ideal conditions.
It rains. A lot.
And if you want to ride, you're going to get wet.
And your bike's going to get muddy, grimy, and pretty gross.
But that doesn't stop me and most of the local riders from hitting the trails.
Heck, all this rock work on the North Shore was done to make the trails rideable year-round, and resistant to heavy rainfall.
But what about after your ride?
Your bike isn't as new and shiny as it once was.
The gears are crunchy, and there's gunk everywhere.
Living in Raincouver, this is a pretty common sight.
So today, I thought I'd take you through my almost daily winter bike maintenance routine.
Keep in mind, what I do might not be the recommended way of doing things, but it gets the job done.
First things first, I get all the cleaning products I'll need.
I keep things pretty simple, with a hose, brush, and some soap.
I really like using products like Muc-Off and the WD-40 bike cleaner, but I don't always have it on hand.
So I found that using regular dish soap mixed with water works reasonably well.
I lean the bike, and I wash off as much dirt as I can with the hose.
And then I clean off a bit more dirt with the brush.
Make sure that the brush and bike are wet before cleaning off the dirt, as sometimes I've found that if it's dry, it'll scuff up your paint.
Once I do this initial cleaning, I'll use the soap in the spray bottle, and cover the bike, and even the brush.
And give it a good brush down.
I try to get into all the nooks and crannies to get as much dirt out as I can.
Sometimes I have to grab the small brush so I can get really in there, but it's worth it for that new bike look.
Once I'm done with one side, I'll lay my bike down on its opposite side, so I can clean it up and get the bottom as well.
One thing I really like to do is clean my hubs.
Now don't ask me why, but having clean hubs is oddly important to me.
Once everything is brushed and covered in suds, it's time to rinse it off.
Now sometimes I try and rush this part, and I'll find extra soap bubbles hidden away under brake levers and my seat.
So take your time and give it a thorough rinse.
Now your bike is nice and clean, but you aren't done yet.
I try to get as much water off as I can to reduce the amount of rust.
Mostly that means bouncing it up and down a few times and using something to dry off the chain.
This also cleans your chain a bit, so you won't need to get that chain cleaning tool out as often.
Now once your bike is dry, it's time to add a few finishing touches.
Even in wet conditions, I like to use a dry lube.
You'll need to apply it more often, but I find there's a lot less buildup in my drivetrain.
I apply a few drops to each link, let it sit for a few minutes, then I wipe off the excess.
The next thing I'll do every few weeks is apply some fork boost to my fork, shock, and seat post.
Basically all you do is apply a bit around the seals, cycle your fork, shock, or seat post a few times,
and you'll see it pulls up a bit of gunk that were hidden away in there.
This helps keep things moving smoothly and feeling like they were freshly serviced.
Now this isn't a replacement for a service, but it just keeps things moving smoothly.
Make sure to wipe off the excess and use some isopropyl alcohol to clean off your stanchions.
This really helps when your dropper starts to feel a bit rough after some of those wet rides.
And now you're ready to rock, ready to hit the trails again, so go get that bike dirty!
