Exploring the World's Largest Earthmoving Machines at BAUMA Munich 2025!

Machine Era
31 followers
Welcome to Bauma 2025 Munich, the world's largest construction show AND trade show.
Every three years, all heavy equipment manufacturers bring their latest and greatest to Germany for hundreds of thousands of people to admire (AND BUY).
Thanks to Zeppelin Cat, we not only spent a few days at this year's show but can also show you some of our favorite machines in action from other visits over the years.
#machine #Equipment #HeavyMachinery
In this video we're exploring the world's largest trade show,
Bauma, Munich. But this ain't your grandpa's trade show video, don't you dare yawn.
We're not only going to show you the ins and outs of the show,
but we'll take you on a series of side quests to show you each machine in action worldwide.
We can't explore Bauma without seeing Zeppelin, Germany's powerhouse caterpillar dealer.
Since it was Cat's 100th anniversary, they had all sorts of fun machines on display.
And arguably the most interesting was their live Cat Command demonstration
with the fine folks of Lucas Glaser.
Thanks to our friend Simon at Zeppelin, we saw these guys in action last summer
at their local Germany quarry where they operate a Cat 395 excavator and D6 dozer remotely.
With that, let's get to our first side quest.
We just drove a few hours to Stuttgart or outside of Stuttgart. We just filled our
bellies with lots of German sausage and now we're here at Lucas Glaser's quarry.
We are not going to get necessarily into the quarrying operation,
but instead two unique pieces of equipment that they have here.
The quarrying operation is somewhat straightforward. We've got a Cat 990
loading 775 trucks. They're hauling up to a crusher. The crusher is then feeding a plant
similar to the one we saw this morning. But this is the unique part of this operation.
Every quarry has a fixed footprint and every quarry has something called high walls.
High walls are the walls of rock that are exposed as the quarry goes down.
Now, typically the quarry steps down further and further to leave the high walls only a certain
distance high. So as the quarry gets deeper, the footprint of the quarry gets smaller and
smaller as it goes down into the hole. But that leaves a lot of rock inaccessible.
So here they've kept the high walls absolutely extraordinarily high,
straight up and down because the rock allows them to do so. So that is about 70 meters of good rock
with about 30 meters of waste material on top of it. That's a 100 meter high wall total.
The problem with the 100 meter high wall is that it's dangerous to work underneath it.
Rocks could potentially roll off that wall at any time and smack anybody down below if
they're walking around or if they're in equipment. So to keep everybody safe,
Lucas Glaser has talked to Zeppelin and they've brought in Cat Command. We've explained this
technology in a different video that we can link right here from Australia, but this is a real
world application. We have a D6XE Cat Command and then we have the world's first 395 excavator,
Cat Command. That excavator behind me that's running has no one in it. If there's no operator
in that excavator, where is the operator? The operator is in this box here, the Cat Command
Digitale Schaltenzentrale. So let's go inside and check out this remote operator station in person.
We're in the command center here. There's carpet, which is quite nice. Feels very nice. There's
high wall themed graphics on the walls. We've got mood lighting all the way around. A window
over there, air conditioning. It's as comfortable as my bedroom is. This has high speed internet so
that we have a good internet connection to the machines working on site here. And then there's
a video feed. There's a camera, I'm assuming on top of this building. Camera on top of this building
showing us the top feed and then the bottom screen is all of the cameras on the machine itself.
And then the very bottom screen is the control panel, what you would be seeing if you were inside
of the machine. The operator, exact same setup that he has in the cab. We've got foot pedals in front
to run the tracks back and forth. And then we have two joysticks to swing the machine and control
stick, boom, bucket, exactly like you'd control any other excavator. Now that we've seen the command
center, let's head down into the pit to check out the 395. We're down in the pit. We can get this
close on foot because we're not next to the high wall. They're just doing this for demonstration
purposes, but typically this machine would be a lot closer underneath that high wall to get in
there without exposing a person to those potentially falling rocks. We know that is under the
control of the CAT command chair center there because it has the blinking blue light on it.
And then the D6 that we were just running via CAT command is above us working in the fill area,
but it has a solid green line on it, meaning there is someone in that machine using it like a typical
dozer because he's off that face a little bit. And I just want to say the Australia visit with
WestTrack was pretty cool. It was extraordinary, but it was an artificial application. This is a
real-world application. This is not to replace day-to-day operators. This is to put machines
into potentially hazardous areas where it makes financial sense to do so, to extract this rock
from a place a person couldn't go. It's for very specific applications like this, so this is fun to see.
With our quarry adventure over, let's return to Munich to visit another incredible German company,
Liebherr. Liebherr had Bauma's biggest booth covering 14,000 square meters or two football
fields. With over 70 machines on display, from huge cranes to mining excavators, we could have spent
all day at this booth alone. And it wasn't my first time here.
I also had some fun with a material handler at the 2022 show.
Very cool, but also very scary. Yeah, first time running a material handler. Not ideal conditions.
But this year, I was sure to check out another Liebherr giant, the PR776 Dozer.
This 160,000 pound or 72.5 metric ton machine was a beauty, all polished at the show.
But it really stands out at work, which means, you guessed it, another side quest.
Now we're off to Iceland to see another 776 battle lava? To summarize, this project required
contractor Istak to build lava barriers from former lava flows to protect a power plant in
town from new lava flows. Not your everyday earthworks project. Lava is tough stuff,
which is why Istak used a PR776 Dozer to rip and push material into piles for
eventual placement atop the barrier. Pretty basic cut to fill operation. Yes,
we're dealing with lava here, but it's really just earth moving at the end of the day.
We have two large dozers. There's a D11 back there, next gen, and then that Liebherr 776.
It's actually the first one I've seen running out in the wild. They are using their enormous
rippers to rip this existing lava rock that's in this field here. That's a long day getting
shaken around, tearing that rock up. That 776, it's a smaller dozer. I mean, it's not small,
but it's still struggling with this. Even that D11 is struggling. This is tough stuff.
And then once they've ripped it, they're pushing it into these big piles,
and that's when the excavator can take over and load the trucks.
Quick size comparison. This is the Liebherr 776 right behind me,
and here we have the Caterpillar D11. All right, we're making great progress through
our machinery adventure, but let's cleanse our palettes with some attachments, a European
specialty. Every European company uses an assortment of attachments for anything from
roadwork to demolition. And one of my favorite attachment-specific visits over the years,
seeing a Ereger's A-Rex working in Zurich, Switzerland. This is Ereger's A-Rex.
It's a, I think it's based off of, it's between a Liebherr 9150 and a 9200. It's said to be one
of the biggest demolition machines in the world. It has its smaller configuration right now.
There was this big old part of this industrial facility they tore down, and that's when it was
configured to be a lot longer. Now they're just working on this ridiculous footing foundation that
seems to have more steel than concrete in it. So the most amazing thing is, and this is what we
saw yesterday, but it's true here as well. It has this oil quick system on it, and so it has all
its tools, and you can drop your hammer and pick up your processor, or drop your processor and pick
up a bucket in like a minute. So he'll have his tools and he'll be switching in between a bunch
different tools, and he's probably switched since we've been here like 15 times over to try to get
just a little bit of this footing hammered out, and then he'll grab a bucket and scratch away at it.
It's an amazing setup, and having oil quick on a machine this big is just crazy.
Back to earth moving. Let's go bigger. Bigger. Even bigger than the PC-7000? Oh yeah.
Heron Connect's booth was a showstopper. When it comes to tunneling machines,
they are the king. Unfortunately, their machines are way too big for even the biggest of trade
shows, but they had brilliant scale models and an interactive map showing all their projects
worldwide to compensate. One of their biggest machines currently at work? She's named Mary,
and we visited her only a few weeks earlier in Virginia. We have a full video on this
giant mechanical earthworm burrowing itself beneath the Chesapeake Bay, but in short,
these machines work by using a giant rotating cutting head to chew through the earth ahead.
It removes the earth via conveyor belts while simultaneously building the permanent tunnel
with concrete rings. Let's visit the heart of the machine to see how it places segments
and advances. This will be the next ring. We've got nine segments ready for that arm to place
once the machine starts moving again. So they've brought these in. They've lifted them with that
crane three at a time. They put them on the tram. They've brought it all the way through that first
tunnel. They've turned around. They've come back through, down, all the way through the machine.
Now they're at the very front of the machine. They're always lined up one through nine. So we
have S1 here, and there'll be S9 at the very back. And then the computer, the positioning system,
will tell the operators where to put each one of these segments to determine then how the machine
moves forward. Because by positioning these segments differently, they're able to steer
the machine. The cutting head is pretty close to where Jack is standing, the camera, where you are.
Most of the machine is behind me. So someone asked, isn't it scary to be underground? And it's not at
all because you never see the ground. Most of the machine, almost everything within this tunnel,
is already within these concrete rings that the machine, the TBM, is assembling as it moves. So
at the very front of the machine, we have that shield pressing against the earth while the
concrete rings aren't there. And then almost right after that, we're building those concrete rings.
So majority of the machine never sees the earth.
So these cylinders here, there's 27 pairs of these cylinders. They're pushing on this ring
right above us here. This is the last ring that they've installed today, this morning. And these
cylinders, 27 pairs, are then pressing against this ring into all of the other rings that have
been set by the TBM. And they're pressing all the way around the circle evenly to then propel
the machine, that cutter head, into the earth in front of us, which then drives the machine forward,
allowing the tunneling to take place. So those cylinders are what propel this entire machine.
And then once they've pushed the machine far enough ahead, they'll retract those cylinders,
they'll place the next ring, and then they'll push those cylinders up against the next ring,
rinse and repeat hundreds of times, almost over a thousand times, and they'll be at the other end.
Now for our second to final quest, meet the Cennebogen 895E, one of the world's largest
material handlers. While we haven't seen one at work for ourselves, our good friends at Awesome
Earthmovers shared brilliant footage of the same machine working at a port in Germany.
And for our final quest, Bauma's showstopper, the PC 7000.
Do you see the bucket? Do you see the machine? Do you see it?
Did you like it? Oh yeah, yeah, yeah, fantastic, yeah.
So we have at the moment hundreds of people. Oh, it's a party, yeah.
I think the coolest shot is from inside the bucket. Yeah.
Can you take my picture here real quick?
Yeah, thank you for having us. Very welcome. Yeah, this is perfect. Perfect.
Yeah, it's certainly the star of the show. Thank you. Yeah, we're very proud to bring it down here.
Yeah. I think it's always a people magnet. Oh, oh yeah. I mean, of course, you have a really
limited possibility to move it from the safety concept, but the moment you start raising the
bucket, everybody is amazed. Oh, yeah. Oh, most people will never see a machine,
even a fraction of this size. Like that's the biggest machine they might see anywhere, not.
And already this one, if you would load it with one bucket, right, you would overfill it. So that
is just... Oh, it was, yeah, it was quite funny seeing that drive around and how much
lower. I mean, it's half the size. You're up in the cab looking down.
What's up? Can we take a quick picture? Yeah, yeah.
While I love picture time, let's explain this beast. The PC7000 is a 700 ton mining excavator
built for the world's biggest mining operations. It comes in two power configurations,
conventional diesel and electric. We saw the diesel variant in Australia last year,
which we'll show you later. But let's talk about the electric machine here at Bauma.
Komatsu let me go for a ride. This is the cab of the PC7000. You can see
probably 100,000 people out there. Big machine. This is the biggest machine of the show.
Biggest machine at the show. Like last time was the 4000 and this is a lot bigger than the 4000.
Fun fact, I'm not sure if Matthias told you about this. We are not able to run it with full power.
You probably noticed it's a bit slower because otherwise all fuses around us would fail and
there would be no energy here. Really? It's because of power? It's because of power. We
are using the public grid down here. We have two transformators and a frequency converter.
Matthias all the time is watching the oil temperature because if it goes beyond 37
degrees celsius the pumps will go into q max and then we are taking so much energy out of
this place here that there would be no energy all around us. That is crazy. Wow. So those are
the transformers down there. What you see in orange are the transformers and in Germany we
have the net frequency of 50 hertz but have a motor on it for the North American market. This
machine will go to North America afterwards so 60 hertz required. It also shows the flexibility
of electricity. Wow so you're running this shovel with the grid. That's interesting.
Well there you have it. There are so many people down there and you could play a pickup game
of basketball on the back of this machine no problem.
They're all here just to see me.
Yeah all these people are here for me. You want to go into the machinery house seeing the
electric motors pump. Oh yeah yeah yeah yeah yeah. It's quite spacious in here.
All right we'll give you a tour. Oh it's much different without the engine. Yeah that's the
wow.
Oh this is so much yeah so much more spacious.
Machine not diesel it's electric. Electric is actually quite a bit more cost effective
and the right application if you have the grid for it. This is the cheaper way to run this machine
more economical you make more money mining whatever commodity you are. So we have these
two 1700 horsepower each electric motors running the overall machine but this machine is also
designed for diesel power so you can apply diesel to the same machine. That's why it's so much more
spacious because it's designed to accommodate much more equipment but with this configuration
you need a lot less. They have in Canada they have electric 8000s don't they?
As long as you have really the electric infrastructure inside.
Yeah yeah yeah yeah yeah yeah just the control blocks are where all the magic happens right
where it's decided where the oil flow goes. It's incredible.
Which are delivering each roughly 1000 liters of oil per minute and then these control blocks
determine where the oil flow goes to and which consumers are used. So it's quite smart control
in the way that we are considering obviously not one pump for one consumer but really look
that we bring the the oil flow right where the energy and the power is required. Thank you for
coming. Not only did we walk around the machine but Komatsu let me sit in the cab during the
demonstration while Jack and TJ filmed it from their balcony.
While a brand new PC 7000 is neat they're best in the dirt. Let's travel to when we saw one of
these giants working at a steel making coal mine in Queensland Australia. The machine was loading
overburden into Komatsu 930 electric drive haul trucks which haul over 300 tons of earth per load.
Such big trucks need a big excavator and the PC 7000 is clearly up for the task.
All right our Balma machine request is complete. Sorry it took us a while to get to this one.
We've been busy looking at machines. If you enjoyed it be sure to like and subscribe
of Balma. We have been here for four days now. We're exhausted. We're ready to close this thing
out and so is everybody else. We are at the cat booth with Zeppelin the biggest cat dealer in
Europe. They're hosting us. They've been fantastic and we'll be with them next week as well. We have
tons of people here. They have 700 employees with Zeppelin. Cat employees as well for the
100th anniversary. Zeppelin is closing things out with all of their people and some of the
show attendees and then we will get on with officially closing this thing out
and getting these machines out of here. Okay the honking in the background indicates that
Balma is almost over. Zeppelin presentation just about done. Simon there reserved this 775 for us
one of the biggest machines within the cat haul and we're going to be the ones to honk the horn
once they're done any moment now. It's gonna be really loud.
That's so loud.
I'm actually I'm quite impressed. The shows I've been to they're a little slow
to wrap up but it's been 45 minutes. There's already machines. This is the third or second
Komatsu machine out of the Komatsu haul. There were just a bunch of case and doosan excavators
that ran that way out of the gates. There is stuff going on everywhere. Trucks rolling in,
people tearing out. We are in full dismantling mode.
