NVX sound deadner

Outty 5000 Hertz
66 followers
Oct 5, 2025
Unboxing video of the nvx sound deadner and other steps forward in my build.
Subscribe to the channel for demos and unboxing videos of the best in car audio! Whether its budget friendly or depressing for a wallet you'll see it all! Smash the like button, share and leave your thoughts on the videos! I respond to every comment and have giveaways every couple of months! Make sure to click the bell so you'll be notified when my videos are uploaded.
Follow my instagram page to view all of the photos of builds from the past and to keep tabs on my current build: https://www.instagram.com/johndub14/
good YouTube mashup boyoung dub coming
up with another unboxing video here I
think I did my last my we I did my last
video of this past Saturday doing update
when I had got my my Pioneer amp the
4-channel amp which I said was the last
basically last piece of the puzzle as
far as the music stuff like that and
today I'm doing unboxing video on my
sound dinner I was talking to my guy
Robert Garrett he sent me a video last
night of his Honda and man he is tearing
that thing apart but me and him were
speaking I told him I was doing some
sound deadening on the car I was using
that fat map like I've said on Saturday
but I said I was getting some I don't
know if I send the video or not but I
was getting some nvx I think I did some
MVX down down there that was coming
today so this is package one of four I
believe and doing this nvx sound
deadener let's take a look at it see if
I can there we go
so of course I got this from Sonic
Electronix I do a lot of shopping with
them so I do get a quite a bit of
coupons for discounts so I got this
sound dinner I think is 90 mil and it is
I guess four square feet 18 by 32 inches
so doing the sound deadener in the car I
already did the trunk matter of fact
it's open that right there was kind of a
test run I guess with that fat head or
fat man I'm still I don't know what the
hell I did with the wrapper to it but
that's the test run so I'm a course I'm
gonna finish that up and rolled over in
the whole nine and the main thing I'm
doing is cleaning the trunk first and
make sure they like it's full the debris
and whatnot so all that stuff can lay
down I did put the LEDs in the trunk
I put the LEDs everywhere just did my
little thing as far as a run aside and
still got the end reckon area and
finally got the battery holder the way I
wanted it to
hold in here so the battery's not going
anywhere but got LED lights all over the
place got them down here so it's going
to be a blue light special anytime I
open trunk but basically just want to do
the video too so for the nvx did get the
sound like I said this is package 104 so
to do it I do have the sound deadener
here and it's pretty heavy pretty heavy
got a little bit of weight to it so I'll
be doing the rest of the trunk with this
well yeah the rest of the trunk doing
some of the inside of the car and I'm
going to take the headliner down and do
that too so this comes down to basically
I guess the floor in the the room for
the car so probably start on this
tomorrow the rest of these packages
should be here on Thursday so got a
couple more rows of these come in for
the MVX sound deadener so like I said
that up going in Paulo I'll get that
done and I think I'm done as far as LED
lights just trying to kind of having a
little bit of issue with the adhesive
but that's nothing that super glue can't
fix so I'll get that done and get
rolling on stuff and I just got done
cutting my yard that thing is probably
like three feels big but it is what it
is man is that's that time of year and I
did go to did I put had to go back out
to Lowe's to get some more wood cut for
my on an track so I got this stuff here
two more boards that I'm going to put on
there just for support did get some read
abroad I got this this threaded rod from
Lowe's and this will go DISA go on lock
out for these these are going to be
mounted the mounting support for the
precision power ramp and this pioneer
camp and I got some ghost lights that
i'ma put Chevrolet it goes light or
whatever I guess they don't show the
logo but as several a ghost like some
about them probably maybe do tomorrow
try to get these mounted tomorrow this
and my precision power amp
obviously when to Home Depot and guys
some of their stuff 8 by 32 because it's
that the thread arrives here a bar 30 30
toons got a couple of lock washers
they're locked nylon lock nuts got the
screw nuts because I'm going to go go on
both the I don't care about the color
but just trying to make sure that it is
supported very very stout I want to make
sure that I'm not quote unquote
vibration proofing because I don't think
that's possible but I just want to make
sure everything's secure I want to ride
around all day with music bang in just
you know work just better
that's I can say like I'll say I never
video I'm working on it moving forward
in the bill some carpet I think I'm a
carpet ease on though maybe wrapping the
carpet because they're going under down
racks are not going to be seen and if
you see that there that is a speaker
ring for the 8 inch Rockville highs so I
got that wood out here somewhere
I'm about to start basically
highlighting that out drawing it out as
far as what it's going to be the cut out
for it
hopefully I can get that done either
tonight or tomorrow but basically what
I'm just going to do is mount them in
the wood I did say I'm going to rough it
in vinyl that is still the plan so along
with everything lays down like I wanted
to then I'll go ahead and do that and
off yourself do a video on that as well
but the main thing is just want to get
everything drawn out get the big boy
drill out I got my little hole saw get
those cut and hope to god that the the
magnets are fit in there if not I'm
gonna have to do a little bit of
modification but I do have the tools to
get it done so that'll probably be a in
depth video as far as when I get these
mounted and go from there so yeah
basically this video is kind of just a
little bit of a catch up got these as
well since the amps don't line up the
way I want them to so what I'm going to
do is use this
right now I'll say the planets use this
to make it my pioneering app is a quite
a bit wider than the precision power so
the plan right now is to use these as
the feet for the precision power so that
I can make sure that that secure
obviously lock it in place put multiple
screw nuts on there make sure that it's
good secure is going to have a rubber
grommets as well so everything should be
squared away is just finding the time to
work on it I was cutting I actually
started cutting my grass last night and
so he got the raining on me so went
ahead and finished it up today if y'all
get here in this video I am exhausted
because like I said my yard is like
field and a half if not three because I
cut the alleyway as well so I'm tired
but I'm motivated so like I said about
to go ahead and get out here get the
drawing knees as far as the the holes
that I got to cut and make the H fit I'm
gonna put that in the wood that's trim
for them like I know know Mike I might
just wrapped using carpet just for to
him just for the hell of it I'll give
these mounted to the bottom of the ham
rack so I got just for personal
preference just to make sure that it's
good secure get all that stuff done
tonight and get the rolling on this
unsound dinner
so now I'll get this late I know I
basically I bought this for a spot that
I know I'm one to deaden but you know
you got to pay to play so I'm going to
hit him got a couple more rolls of this
coming so I can go ahead and cover the
damn car and get her done and do it the
right way so like I said there will be
more videos coming soon everybody please
stay tuned subscribe to the channel it's
going to be some worthy stuff coming up
soon and once I get to roll into this
part here and getting these all these
wires terminated and everything hooked
up I guess the real last piece of the
puzzle is going to be alternator which
I'm going to go out on a limb and say
I'll order it next month so there will
be some demos come in they'll probably
be real short
fact that I'm going to be running on
stock for a little bit but hopefully
maybe let's say second third we could do
an object the alternator have ironstone
and be able to do all this stuff the
legitimate way and go from there so like
I said just a stay tuned man you'll see
the updates coming subscribe to the
channel as always if you have any
questions comments concerns hit me up
man always hit everybody back as young
dumb about to get to work man I'm out of
here
