In today's episode we go over the process of finding the center of every circular object like coasters, cutting boards or table tops using a theorem from mathematics that uses cords and perpendiculars! We also apply this process to a coaster and engrave it to see how well we can find the center using this method. Enjoy :)
0:00 Introduction and Overview 1:03 Demonstrating the Procedure 4:12 A Real World Application on the CNC 4:41 Results 8:37 Outtake
good morning fellow woodworkers welcome
back to another episode of mathematics
and physics for woodworkers and this
episode actually got suggested by a
viewer last time around we have talked
about circles and how to cut in perfect
circles etc or the mathematics for
woodworking series link to the whole
playlist down in the description one
very important question that i didn't
even think about before came to the mind
of viewer
given something circular for example
this piece of tensegrity that i have
right here how can i find the center of
the circular disk
that is actually a very good question
and this is a theorem for mathematics
where you are going to make use of the
so called chords of a circle to get
yourself the perfect death center of any
kind of circle there is and i'm going to
demonstrate this theorem to you
outside on the other side of the
workshop using a bit of chalk in my
floor
now before we can get restarted let us
draw a circle onto the floor obviously
we need some kind of circular table top
or something
[Music]
next we need something very straight
like this level and also something to
measure instead of something to measure
you can also use your compass yet again
but we are going to suppose we don't
that we don't have a compass attend
right now so i'm going to remove the
center here okay because we want to find
out where the center actually is i can
still see it i'm i'm going to mark it
here okay but for now what we are going
to do is we are going to draw two cords
into our circle what are chords exactly
well they are basically just a line
which connects two random points on our
circle in some kind of way let us draw
two random arbitrary chords into here
[Music]
this is the first one and now on any
other place really doesn't matter where
i'm going to draw a slightly longer one
for the second example
and there we go now we got our two
chords going and what you are going to
do now is you are going to find the
center of these two chords respectively
meaning if this one is for example one
meter long then we are going to make a
mark at 50 centimeters obviously so let
us measure and lets mark the middle of
the two lines
and the last thing we now need to do is
draw two perpendiculars to our lines
which pass through our middle points for
this you can use your regular old
miter square or something of that sword
i'm going to use this one that i use for
my table saw and also table tops
okay perpendiculars they are going to go
90 degrees away from this line right
through the center point
[Music]
and now where the two perpendiculars
meet this is going to be your circle
center this is the center of your circle
exactly here and this mathematical
theorem actually has a bunch of neat
little applications actually i can see
where the original center was anymore
maybe i have marked it down in the video
with a little annotation i can just hope
and guess that this right here is fine
at this point at least up to some arrow
obviously all the lines that i drew
chalk have some kind of dimension
meaning i'm going to have some arrow
bounded to my construction that i have
here but overall this should be pretty
much okay for our purposes as a woodwork
worker and the thinner pencil you use
the better your approximation for the
center is going to be overall let's take
a look at a practical example over at my
cnc
and to demonstrate how useful this
mathematical technique actually is we
are going to make use of this technique
on
a coaster you could say this is just a
very fine fine piece of
plywood that i still had lying around
and what we are going to do is we are
going to engrave something into it
just imagine this you already have
coasters lying around but you don't have
a template yet or perfect coordinates
for your cnc router that you can put
into there such that you know okay i
have to put my zero there and then i can
start engraving just imagine the
situation i actually had the situation
before and it was terrible to kind of
just eyeball everything and where the
center position is this was only for my
um own stuff at home but it's still
terrible it's a terrible situation and
it's going to be really useful if you
have like a batch production and you
wanna basically find a center of
circular coaster for example and you
wanna engrave it with something then you
can use this technique you can also use
this technique on obviously something
like a big table top or cutting boards
too to get a juice groove into the air
perfectly all of this is definitely
possible but we are going to try it out
on a small example let's start engraving
[Music]
and as easy as that we got a perfect
little
these nut
coaster
comic sense rules no it turned out very
nicely and this method works perfectly
i'm pretty surprised how well it does
work
on such a simple application as
basically getting the position of your
cnc router right for example but there
are obviously other applications where
you can make use of this um technique so
for example um here small arrows can
lead to something that is definitely
visible on the final piece so if you
move one millimeter on a 10 centimeter
disc to the right or left
a bit too much then obviously what is
going to happen is that you are going to
see a certain arrow one millimeter to
this side is going to make one
millimeter more on that side meaning we
got two millimeters of difference you
could say on either side this is going
to happen if you're not careful and
basically don't go with the technique
right
but on bigger things like tabletops a
small difference like one millimeter or
two millimeters is never ever going to
be noticeable by a normal person which
you are going to create some kind of
tabletop for and you wanted to engrave
like for example such a groove um on the
side of the table this is something that
is definitely possible and just keep
this in mind that arrows can stack up
and that you need to be very careful
which tools you use for smaller pieces
like these coasters but this is
basically it and if you did enjoy what
you have seen today why not make sure to
subscribe to the channel i post
regularly over here especially on
mathematics for woodworkers at the
moment and if you do get a cake out of
the series then definitely make sure to
check out the playlist mathematics and
physics for woodworkers link down there
in the description you're definitely
going to find something in there that is
going to be of use for you so definitely
make sure to check it out and support
the channel this way and other than that
you can also buy my handcrafted products
over on stem merch.you for example i
still have this piece lying around that
someone ordered for the shop that's the
chaotic kind of chaotic cutting board
mahogany and maple looking pretty fine i
like this one and other than that i
think guys watching and please have a
flammable day stay safe ciao
[Music]
hey that's a little outtake i'm like
seriously wondering how close we got
to
the actual center so to find out if it's
the actual center think back to what a
circle is it's basically just that the
arc of the circle each and every point
on there is the same distance away from
the center the so-called radius so let's
just measure the radius a bunch of times
and let's see how close we've actually
gotten so i have no idea what the
diameter of the original circle was so
we are just going to measure here this
right here is 80 centimeters okay 80
centimeters from this point that we got
up here
let us see so this point 80 centimeters
now how about this one
okay so from the outer arc of the circle
that's about 79.5
centimeters
meaning we seem to have an arrow of
about half a centimeter which is totally
fine for this big of a size you're
nearly not going to notice this much of
an error and
i mean if you do this measurement after
you have found the center and then
basically adjusted the time a little bit
more then you're going to be in the
perfect center
at no time at all so let's take a bunch
of more measurements let's see
so this right here is
um
77 centimeters
and this over here
77 centimeters once again
okay two more
how about this one
77 centimeters
and our last measurement
this is more about 77.5
so you see this is actually not bad and
what you also have to take into
consideration is the fact that my circle
wasn't perfect overall with a router
you're going to get way more of a
precision because of the rigid arm that
you're going to use to basically cut it
out or on the table saw but here you can
already see that i'm going to have a bit
of a
neck to my
to my curve and then basically what
happened here is that i pulled too hard
on the string probably so yeah we are
actually pretty close and i'm pretty
glad that it worked so nicely on the cnc
and also here on the floor too i'm going
to leave this here then we're going to
look a bit more mathematical and now
have flammable day please stay safe ciao