Fine Wine From Store Bought Grape Juice?

Wine Chronicles
13 followers
#Wine #Makewine #GrapeJuice
Can you make a fine wine from store bought grape juice? Well, we know you can make wine from any juice really, but how "fine" can it be? Wine, commercially made wine, uses varietals of grapes to achieve specific types of wine. Most grape juice is concord grapes, which... while tasty are not the most highly sought after type of grape for wine. Let's see if we can change that!
So how fine of a wine can we make from store-bought grape juice?
All right, we have done my sweet red wine, and it was like really, really simple.
We just took some of it out, put some sugar in, added some yeast, shook it up, and let it go.
So let's find out what happens if we try to use all the best practices we can
and flavor this properly to the standards of the wine industry or something.
I don't know. I just came up with these standards.
There's no real standards here.
The first thing we're going to do is we're going to find out what the gravity reading is
of the juice itself.
And for that, we're just using standard...
I mean, this is just Publix grape juice, okay?
The ingredients, though, this is important.
The ingredients are filtered water, grape juice concentrate, and ascorbic acid.
Now, grape juice, it's really hard to find without ascorbic acid.
We find in apple juice that it's a less than desirable trait when you're using fruit juices.
But in grape juice, it's not that big of a deal,
because I think the grape is so much of a stronger flavor.
It just doesn't really seem to be a factor.
You might be saying, what do I need a reading on the juice for?
Well, because I need to know how much sugar to add.
Look at that color!
It's so clear already, too.
I'm expecting it to be in the 1.050 to 1.060 range,
because most juices usually are.
I just want it to float and get rid of the bubbles so I can see.
I got it, I got it, it's good, it's good, it's good, it's good.
It's like 1.064.
Okay, so that's pretty reasonable.
It's a fairly...
Let me get a pen.
Can you pour that into the...
No.
Why?
Because we're going to weigh this to add our sugar.
All right, fine.
I want to pour it so I don't knock it over.
Well, just be careful.
No, I'm gonna pour it.
I'm gonna put it back in here.
Better safe than have juice everywhere.
Hey, it could happen.
Let me put these back in the turbos.
Yeah, because we're getting juice everywhere, see?
All right, if you are concerned about juice, could you recap this?
I will recap this, because you asked me so nicely.
All right, so the way we calculate this is,
essentially, when you're making a wine or any brew,
you want to have a target starting gravity, okay?
If you don't know what target starting gravity you should have,
watch a few more videos, do a few other people's recipes,
and that'll give you a better idea so that you can start on your own.
For this one, I want about 1.100.
So if I put 1.100 into the calculator that all my teachers said I would never have handy,
it was in my pocket, and I subtract out 1.064, I get 0.036.
Now, we know that sugar, plain old white sugar,
adds 0.046 per pound in a gallon of must.
Everything's a little bit approximate, but it gives an idea.
So I'm gonna divide that by 0.046, giving me 0.782.
For my math, that's about three quarters of a pound of sugar.
If you didn't understand that, I'll put an infographic up explaining all that again,
but that's the gist of it.
So I got three quarters of a pound of sugar to put in here, no problem.
It's right there.
Look at that, it's already on the list.
It's almost like we did this once before.
We knew what the juice was from a previous video.
That's what it was, and we calculated it from there.
But we're gonna do it again to show you,
so that way you would know how to create a recipe on your own.
And that right there, folks, is the most scripted this show has ever been.
All right, so now we need our scale.
And we need our fermenter.
And sugar.
Sugar.
It reminds me of the egg in the Mandalorian, how the...
They said that.
The egg thing that they made them get?
Oh, I don't remember what they called it.
I don't remember what they called it.
But anyway, whatever.
So I need three quarters of a pound.
I went past three quarters of a pound because I wasn't paying attention.
I was paying attention, but I'm not the literate, so...
Yeah, there's 0.87 pounds of sugar in here.
So we're gonna put that.
What does that really mean?
Ultimately, in the end, it means that we're gonna have a little bit more alcohol.
That's it.
Not that much.
Let that be a lesson to you.
Never daydream while you're pouring your sugar.
You're trying to figure out what they were calling the egg in the Mandalorian.
I was.
Okay, so next we want to pour in our juices.
Now, one of these is refrigerated because
when we were using this initially to make our sangria...
I thought they were quartz and they were not.
Turned out awesome, by the way.
I opened this one and we didn't need it.
So it had to go in the refrigerator.
But the other one is not open, so it's still factory vacuum sealed.
So it was fine.
Sanitized for your protection.
To remain on the shelf.
I didn't shake it up.
You didn't shake it up.
So you're gonna pour some of that.
Yep.
Into there.
You want the goop on the bottom of the bottles.
It's a little tannin, it's a little nutrient.
You know, it's not a big deal, but it is.
It's good to have.
It doesn't hurt.
Let's put it that way.
You don't want to spill it like I am.
I actually did far less damage than it looked like we were doing.
I know.
As is the way.
Every drop.
Okay.
Second one in.
Did you shake that one?
It's one of those days, folks.
All right.
This one didn't have any goop on the bottom.
Well, it was cold when you...
It cold crashed.
Yep.
See?
It works.
Oh, I'm gonna splash his own.
By the way, I am intentionally not just
pouring it to be silly and fancy.
I'm intentionally getting extra air into this brew,
because you need that in the beginning phases of
the colony building up for fermentation.
After there's some alcohol being formed,
no more air being added, okay?
Otherwise, you make vinegar.
A word about the sugar and the juice mix.
You can just use the juice and make a totally fine wine that way.
Just remember that ethanol is a flavor.
So adding more alcohol to this not only ups the flavor,
but it also makes it easier to preserve.
Because the higher the ABV, the less likely something can live in it.
So this should be somewhere in the 13% to 14% ABV range,
meaning it's pretty well preserved for the long term.
If the alcohol percentage in a potential brew is a little confusing to you,
we have some videos on that explaining the differences
between the ratio of fermentable sugars
and the alcohol tolerance of your particular chosen yeast
and how those correlate with each other to create a certain ABV.
You know what I need to do now?
You need to stir it.
Which means I need my spoon of unusual size.
All right, I need to cut this one still.
And I just want to mix those sugars in,
because if I don't, I won't get an appropriate reading.
I can feel them in the bottom.
That's an advantage to using a glass container.
I can feel the crunching, and I know
people are asking all the time now,
can they just use a plastic bucket?
Can, you know, does it have to be done in a glass?
No, we just prefer glass.
Glass is cleaner.
It doesn't harbor bacteria and infectious type things as easily as plastic does.
If you scratch plastic, it's much, much harder to get it clean and sanitized.
And also, in most cases, create a better seal based on this.
Yeah, a lot of the plastic buckets kind of, they suck at making seals.
They do.
We actually have lots of plastic buckets.
And they suck.
And we just, they're stored up in the top,
because we're just probably not going to use them.
Plus, if you use glass, you can see what you're doing.
You can see it working.
You can see bubbles.
You know, it's just more interesting.
Fun for the whole family.
Now, you'll notice I'm being rough with the stirring,
but not so rough that it splashes everywhere,
because, you know, we want to make alcohol,
not have to mop it up off the floor.
So I'm trying to get more air into this,
because this is a harder fermenter to try to pick up and shake around.
It just doesn't work real well.
There are, like, the drill attachment things and all that.
You can totally do that if you want to.
I just never think to do it.
All right.
So it looks like our sugar is dissolved into the liquid.
I'm not seeing any crunchies.
But we are going to add some things.
I'm going to keep our spoon here so we can continue to stir.
Right, because this is a fancified wine.
This is fancified.
Right.
So the first thing we're going to add...
Before we even get to that,
let me talk about this for a second.
There is nothing wrong with keeping it simple.
There is nothing wrong with it at all.
No, our simple red wine is actually one of our favorite recipes.
One of our favorite recipes.
I wanted to use all the extras and see,
like, you know, because some of them are useful for this, okay?
It's not like I'm just throwing things in to throw them in.
I'm using them because each thing does a specific thing.
If you are against using powders in your brews,
just skip all this, and this is going to be a perfectly fine wine.
You're going to want the yeast.
That you'll want.
And the first ingredient that we're going to add.
You'll want that too.
Beyond that, it's all kind of optional.
We're doing this because I want to make kind of a sweetish table wine
that has a good tannic quality, nice mouthfeel.
I want it to be a little viscous,
and I want it to be like a bright thing that really has a lot of complexity, okay?
I know that wasn't the greatest explanation ever,
but that's what I have in my head as to what I want.
So that way, when you watch this video
and like half an hour from now in the video, when we're tasting it,
you can remember.
You'll see if I actually got it right, or if I messed it all up.
Wow, that was the most awkward statement I think I've ever made.
Anyway.
First off is Fermade O.
Fermade O is a yeast nutrient.
The O stands for organic,
but will definitely be bountiful for our yeasts
to ferment this brew without being stressed.
It's got vitamins and minerals in it that the yeast need.
There you go.
It gets their little yeasty bodies growing strong.
And what are they going to do because of this?
They're going to...
Which one do you want me to say?
You have a few.
I just have the 2.5 grams and a little bit of water put in there.
Uh, they're gonna...
I don't even remember the party dance.
The happy dance of love.
Okay, next.
Because grapes and grape juice, probably by extension,
have a lot of pectins in them,
that can make for a cloudy brew at the end.
We want this to be crystal clear, like gem-like in quality.
So I am going to be adding some pectin enzyme.
And if you put it in in the beginning of fermentation,
use a half teaspoon per US gallon of juice.
We used a gallon of juice.
So I'm going to do a half teaspoon.
Now, if you didn't put any in the beginning,
you can use it at the end.
But you need to use double,
because it doesn't work as well after fermentation.
Pectin enzyme also has an added benefit if you're using full fruit.
If you're using full fruit,
it's going to help extract the sugars in the fruit more readily,
so that they're more accessible to the yeast.
The next thing is wine tannin.
We're just using a powdered wine tannin.
If you really wanted to,
you could add a cup of strong black tea to this.
Any tea of your choice.
The difference is consistency.
If you do the tea the same way every time,
you'll get the same amount of tannins from it.
This, I could just measure,
and we get the same amount of tannins from it.
Now, Brian said any tea of your choice,
and I don't want you to be too black to use with that.
Yes, it has to be a black tea,
and preferably not a flavored black tea,
unless you're using that as a flavor adjustment.
Like we did in Earl Grey Mead, though.
We are looking simply for the tannin aspect,
and that's why we suggest using just a straight black tea.
This is the North Mountain one,
and it's actually oak extract.
It's like ground up charred oak, basically.
So it's kind of like adding wood to your brew
for a little while.
So this will have a little bit of a more mouthfeel,
a little bit of an oaked aspect to it.
Half teaspoon.
And then grapes can have kind of an odd...
They're like tart and sweet at the same time.
I want this to have a little bit more of a brightness to it,
a little bit more lively,
a little more spark on the tongue is an easy way to say it.
So we're going to be adding acid blend.
Now acid blend is just a mixture
of the three different types of acids, I think.
That's all this is?
It doesn't say.
Of course they don't say.
I know there's tartric acid and a couple other acids in here.
It just gives a nice overall acidity
rather than one specific type.
And it says right here...
One teaspoon per gallon increases the acidity by 0.1%.
I'm going to play it safe and just use a half teaspoon.
You know why?
Because it's easy to remember.
So half teaspoon.
We can add more later should we decide we want more.
But right now I'm playing it a little on the safe side.
We can always balance the flavors when it's finished.
Now if the importance of tannins and acids to your brews
is something you'd like to explore more further,
we actually did a video just on that topic alone
and I'll link it in the description below.
And the last thing that we need to add
is the one thing that's not on the table.
It's our yeast!
Before we add the yeast, I do want to get a reading on this
just so that we know how far off I went
because of all that extra sugar.
All right, so we got our goop on there from the...
It's fine.
...the wine tannins.
Can you get the...
Oh, that's just a little bit.
Can you get the reading equipment, please?
And as always, we're going to be using a hydrometer
with a graduated cylinder
and the master baster, also known as a turkey baster,
that just works really, really well.
And we're going to grab a sample and put it into our cylinder.
I'm expecting that it's a little higher than I wanted it to be.
Probably like a 1.120, which might make this come out
just a little bit on the sweeter side,
which is not a bad thing.
If it's too strong, like if it's too high,
I can just easily...
I can just easily add some water to it.
But what do you know?
1.100.
I don't know how that happened
because it probably shouldn't be,
but it's actually 1.098.
Huh?
I put in too much sugar,
but I didn't put in that much too much sugar.
And actually, my calculations called for 0.78 pounds of sugar.
I have 0.87, so yeah.
Figure that one out.
All right, so 1.096.
In case I didn't say that already,
yeah, 1.096.
That's going to give us somewhere in the 13% range,
which we're going to be using a yeast
that is capable of as high as 17.55% in our experience.
But it is actually rated for, I think, 13 to 15,
14 or 15, something like that.
And that yeast is...
Well, then, 71Beast.
Also known as 71B-1122 or something like that.
This package doesn't actually say that.
So, Derica, why are we using 71B?
We are using Laven 71B
because Laven 71B has been isolated and selected
by the INRA, something of France,
for its ability to produce a high level of esters,
allowing it to reinforce the aromatic profile
of wines fermented from neutral varieties.
Laven 71B has the capacity to absorb polyphenolic compounds
on a cellular wall,
which limits tannin structure of young and fresh red wine.
Grape must inoculated with Laven 71B
will easily go through malolactic fermentation
as 20 to 40% of malolactic can be metabolized
by this yeast strain during primary fermentation.
Laven 71B is primary choice for pretty young,
fresh and fruity red, rosé and white wines
that are easy to drink.
It is also a good choice for late harvest wines.
Thank you for that.
Okay, so whole packet.
Look at this.
It's terrible.
It's a terrible packet.
If you don't get that joke,
watch some of our other videos where we use Red Star.
Anyway, so I'm going to use the whole packet.
Can you use a partial packet?
Of course you can.
If you don't want to use...
What am I doing now?
Back your packet.
Yeah, if you don't do that, some get stuck.
Julie said that she doesn't like to tear them
because yeast gets stuck in the tear.
Maybe she's a terrible tearer.
Did you get stuck?
I didn't get anything stuck in there.
But I don't think it's like...
I understand you, Julie.
I get it.
I just don't think it's a huge issue.
I'd much rather be able to go...
than have to get scissors
and I'll deal with a couple of yeasts
not fulfilling their destiny.
Okay, what are we going to do now?
We're going to put the lid on the airlock.
I was trying to fool her.
Tighten that sucker down.
What are we going to do with it now?
We're going to let it sit.
Put it in the fermentation station.
It just happens to be a shelf in a shelving unit
that we have cardboard blocking it all off
so the cats can't get to it.
It's out of direct sunlight and that sort of thing.
It'll maintain a constant temperature
of somewhere between 72 and 76 degrees Fahrenheit.
I'll put the Celsius in here
because I don't know it off the top of my head.
And we're going to let this finish fermentation.
What that means is when that airlock starts to show
no activity at all,
we'll come back and show you a reading.
But one thing that's very important,
a lot of people are starting to ask,
I just put this together an hour ago
and it hasn't started up yet.
Should I be worried?
No.
Well, no.
An hour is not nearly enough time.
Yeast can take up to 72 hours,
even sometimes four days,
to start up fermentation properly.
Don't let that bother you.
If, however, after two to three days,
you're still seeing zero activity,
check your seals.
Make sure everything's sealed up.
Look for little tiny bubbles coming up the sides.
If you see that, it's already started.
Don't worry.
If none of that is happening yet,
try raising the temperature in your home.
No more, or even around it,
like a heating mat or, you know, a heating pad.
You don't want to go past like that,
you know, 75, 80 degree Fahrenheit,
but get it up into the 70s
and most times it'll start to kick off.
The other thing is,
if you don't have this much head space,
which means the layer of empty space
between the top of your brew and your lid,
then you may want to put this brand new fermentation
on a cookie tray with a lip,
so that way if it's excited
and ferments out of your airlock,
you can take it.
The little Big Mouth Bubblers are great for this
because there is actually like a whole tray in here,
which is meant for their internal airlock
that doesn't really work.
Don't use it.
Use one of these.
But there's like a reservoir here,
so it takes a lot for them to overflow.
Like this would have to go all the way through
and all the way up and all the way out
and fill all this and then pour over.
We've had it happen,
so don't say it can't,
but these are a little bit harder.
Some of the other fermenters,
it's really easy to get an overflow.
If you find that it's way too aggressive
in the first few hours or a couple of days,
you can always put a blow-off tube.
We do have videos on those too,
but essentially it's just stick a tube
into your bung here,
just a piece of tubing,
like from your auto-siphon,
and put that into a mason jar
or a larger container filled with water,
sanitizer fluid,
and let that go for like the first day or so.
That way it has a clearer path to get out
and it won't overflow and make a mess
or possibly stop up your airlock
and shoot it off into your ceiling,
as we've heard from some people having that happen.
But for now, like she said,
we're just going to let this sit
and we'll see in a couple of weeks
to let you know how it's doing.
Okay, it's been like two weeks.
Time to take a look at this
and see how it's doing.
Airlock activity was slow to a crawl,
if anything at all.
So, you know, time to take a look.
We do give things a little bit of a swirl now and then,
nothing too major.
You don't have to,
but we do it just to degas a little bit,
move things around.
Olfactory and optical inspection.
Smells wonderful.
It really does.
Smells like my cheap red wine.
Let's take a sample.
See how it did.
Now, we used Lalvin 71B for this,
which we used it for everything for a long time
because it was very reliable for us
and we stopped using it
only because people kept asking,
how can we use 71B for everything?
So I'm starting to see why we used it for everything,
because it works.
Look at that.
Um, yeah, I'm going to say 71B did the trick.
0.996.
Now, is this done?
Most likely.
We're going to let it sit for another week anyway,
because that's what you should do
just to be on the safe side.
But we did sanitize everything,
so let me just take this out of here.
So I am going to pour the sample back in very gently.
Yeah, we're just going to tilt slightly
and pour it like down the side
so as to not cause even a bare ripple in the brew.
Put the lid back on.
Now, you might be wondering,
it's at 0.996.
Why are you letting it sit longer?
Well, for one, we have a busy film day today.
I really wasn't prepared to rock this yet.
And two, we always like to wait a week in between,
even if this...
I doubt it.
But even if this moved a couple more points,
that could make a difference.
So I'd rather just play it safe and leave it.
It also proves you don't have to rack things right away.
But just for the heck of it,
let's find out where we're at.
So we start at 1.096.
We are now at 0.996.
I don't even need a calculator for this one.
It's 13.5%.
Beautiful.
That is pretty much exactly where we want this to be.
But it's not done yet.
So we'll see in a week.
This has sat for a couple of days.
I didn't want to let it go too long
because, you know, we want to get moving on this.
It could just sit forever if we really wanted to.
But it was at 0.996.
I mean, how much further is it really going to go?
It's probably done.
But for the sake of thoroughness and consistency,
and because we tell everybody else to,
we're going to take our second reading
and make sure that it's really completely done.
It smells really good.
But I happen to like Concord grape wine.
I know it's not Dereka's favorite.
I have no problem with it.
Oh, you don't like grape juice.
Right.
That's what it is.
Once it's wine, it's fine.
Oh.
Oh, OK.
I see how you like it.
0.996.
Yeah, it's the same.
OK.
So it is...
I've got to find a pen.
Very particular about my pens.
Some of them don't write well on certain surfaces.
So this is 13.5%.
Cool.
It's also done.
So what does that mean?
It's time to rack.
Yep.
We're going to move this off of the lees
and the sediment that it's produced
and put it into a whole other container.
All right.
So racking.
What do we use for racking?
We use an auto-siphon.
Why do we use an auto-siphon, Brian?
Why are you throwing it back at me for?
We use an auto-siphon because A, it's easy.
B, it's inexpensive.
And C, it's very efficient.
Meaning it keeps out of the brew what you don't want in the brew.
And it keeps in the brew what you want in the brew.
And it doesn't make a mess in the process.
As you can tell by all the liquid that I'm spraying all over the kitchen,
this has been sanitized.
Yeah.
Everything that we use has been sanitized.
Now we're leaving the cap on the end.
This is not really just a dust cover.
It actually serves a purpose.
It keeps it from going too far into that sediment
so that way you don't suck up too much gunk.
That's the technical term.
Put the rack-er...
No, rack-ee.
Yeah.
The destination.
Lower than the source.
Make sure that your hose is in the destination.
And you want it to be all the way towards the bottom.
Yeah, you don't want to splash.
But not completely submerged against the side.
Right.
Because then you're going to cause a mess.
And then I go about halfway in and just get it going.
And I'll hold it to the side rather than let it go all the way down
because if you hit the stuff in the bottom,
it sometimes spurts up and makes a mess
and you suck up more goop than you really want.
Basically, just pay attention to what you're doing.
Just be careful.
It takes a little bit of practice, a little bit of experience,
and a little bit of attention, which I sometimes am lacking in.
And you can get a nice clean product with minimal loss.
There's always a little bit of loss when you rack.
Always.
Because you're getting rid of something from the brew.
I mean, it's just the way it is.
The more liquid you have in there means the sloppier you were at racking.
That's really all it comes down to.
Or the more fluffy and light and wispy the particles were,
which that happens too.
And this is something that comes up when you read information packets on yeast types.
They will talk about their flocculation.
And flocculation means their ability to fall out of suspension
and create a nice yeast cake at the bottom.
If they flocculate well,
they're going to have a nice compact yeast cake in the bottom,
thus forth not having that fluffy stringy stuff that Brian was talking about.
Like, people like to crap all over bread yeast.
However, bread yeast makes a really great flavored brew, if done correctly.
But what it doesn't do is flocculate well.
Because it's not made to do that.
It's just not bred for that.
So it tends to be wispy and messy.
And you probably noticed, we don't use a lot of bread yeast on the channel anymore.
Mostly because we found other yeasts that just work a little bit better
and a little bit more consistent.
Plus, bread yeast is a very generic term.
We used that Fleischmann's...
I don't remember if it's Active Dry or Quick Active.
There's like five different names.
I think it's Active Dry.
Okay, Active Dry.
That was the one that we used and it worked pretty well.
But it didn't flocculate all that well.
So it made our brews less than pretty at the end of the day.
Therefore, we started using other things.
71B, in our opinion, works really great, which is what we used in this.
It flocculates well, as you can see.
We have a really nice leescake in the bottom here.
Not a lot of wispies.
The brew is staying nice and clear, even as I, you know,
talk and bounce it around a little bit while I'm racking.
But it also keeps it from making a mess.
That's the key.
And as far as alcohol tolerance rate, it's up there.
It's pretty darn close to...
We're getting full.
Yeah, we're getting full.
Okay, well, we're just going to have to drink some of this then, I guess.
Uh-oh.
Wow, we really are getting full.
This happens sometimes.
Okay, what I need now is something to put all this wine in
so that we don't get rid of it.
A pitcher?
Are we going to drink it right now?
Probably.
Gonna have to.
Oh, woe is us.
This may take some time.
This is how to not waste anything.
See, this vessel was a little bit too small.
We probably could have gone with a larger vessel, but we have plans.
That's why I used a slightly larger vessel.
And I'm just going to put this on here.
Yeah.
I'm just going to use the master baster.
It's a little bit murky.
I'm trying to just get the stuff right off the top.
Didn't clear fully yet, either.
I think just the process of basting, the sucking.
Yeah.
Well, it will suck, but...
It's disturbing.
That's about as far as I dare go.
But what we ended up getting out of that is about eight more ounces, okay?
Eight ounces is two glasses of wine.
So, you know, that's one way to not waste as much.
When you get close to the bottom, use a baster to suck up a little bit at a time.
Don't be sloppy like I did.
Made a bit of a mess.
But, hey, you know, where's a glass?
In the cabinet.
We're going to do some sampling while we do the rest.
There's my wine glass.
First one I grabbed.
So since we got a little babbly during our racking,
I'd like to continue that babble if it suits you.
And the synopsis on yeast and what yeast to use...
We are thoroughly aware that we have an international audience.
And therefore, certain items that we use on this show,
like particular yeast strains, you may or may not have access to.
So the best yeast to use is basically the yeast you can get.
That said, I would like to make it clear that different yeasts do different things
and can cause different flavors in your brew.
A lot of brewers will tend to get down to two, three, or four different yeasts
that they like to use and they're used to using
and they know what to expect from them.
And that's as far as they go.
And there's nothing wrong with that.
We tend to be like that, too.
By the way, that's really good, even dry.
But there's nothing wrong with experimenting, too.
Just know that every yeast is going to create its own unique flavor components and esters.
But they're all going to be within a certain realm of normality, okay?
Which means, like, from the most distant to the closest,
they're not going to make your brew taste completely different.
They'll be slightly different flavors, slightly different esters.
And that's something that comes with experience and time.
Sure, side by side, you're going to be able to notice a difference.
But in reality, you taste this today and taste a different one
with a different yeast in a couple weeks,
you might remember, oh yeah, that's a little bit different.
But it's not like, oh, this one's horrible and this is amazing.
You're not going to get an 11 and a 1 with different yeasts.
It's just not going to be that much on a theme.
Yes, exactly.
This is actually quite nice.
Maybe we don't have to sweeten it as much as I thought.
I was...
See, we're at that point now.
This is going to sit for a few days.
We need to decide, are we going to sweeten it,
or are we going to just let it go?
I know I'm being very silent on my opinion of this.
And that's because we just finished a tasting of a coffee mill,
which is very strong in flavor.
Yeah.
And I think my palate is slightly askew right now.
Drink more of this.
That's why I put it in a mug.
You can see how cloudy it is right now, though.
That's because I did a sloppy job cracking.
But I didn't want to waste it.
It's got a really nice fruity flavor.
And I'm really liking the...
Like, we added some wine tannin acid blend for Mato.
It's got all those components.
Like, there's a good acid bite to it, but it's not overly done.
The tannic aspect, I think it could use a little bit more tannin,
and we have plans for that.
It was right in my face.
There!
It was in her face.
It's not good to film when things are right in front of your face.
So, you know, all those aspects are working really, really well.
I don't know.
I'm torn as to whether this needs sweetness or not.
I think it needs to sit longer before I can make a...
Well, it's going to.
Decision.
We're just babbling, because it's what we do.
Yeah.
All right.
So what are we going to do now?
We're going to put a note.
Yeah, I just put a note that I racked it, and put the label back on.
It's going to go back in the fermentation station.
It's going to sit for like a week,
and see if it clears out a little bit more.
Settle down some of the sediment that I stirred up in the racking process.
It'll be back to show you what to do next.
Okay, just to sum you guys up and catch you up to speed.
This was started on March 22nd.
Today is April 11th.
So we're looking at like three weeks or so to this point.
Just to give you a rough idea.
People are always saying,
Oh, how do you get your stuff to ferment so fast?
Well, I think it's because we live in Florida and things are warm.
So that could be a part of it.
But what we're going to do now,
it's already been racked.
Okay, it's stable.
We know nothing's going to happen today.
We're going to rack it to a pitcher,
and we're going to taste it for final sweetening and adjustments.
Okay, so racking.
You've seen us do it a million times.
We got videos on it.
We're just going to do it.
But there shouldn't be much in the bottom.
So I am going to take the cap off.
And before anybody asks,
Yes, everything was sanitized, including my hands.
So everything is safe.
We are racked.
Now it is time to taste.
And initial taste is always just going to be as it is.
No changes, no alterations.
Just to see what it's like.
I will say it smells very nice,
especially for something this young.
All right, here's my assessment.
If you like dry red wine, stop here.
Bottle it.
Done.
That's all you got to do.
Yeah.
It's very good right now.
It has a delicious flavor.
It has a lovely mouth profile.
It has all the things that you want in a non-varietal wine.
Yeah.
Because remember, this is just Concord.
This is Concord.
This does not taste like a Concord grape wine anymore.
It definitely tastes like a finer version of itself,
which is kind of cool.
Because all we really did was add some wine tannin and acid blend to it.
The acidity level is beautiful.
The tannic aspect fills your mouth.
To me, if I was going to enjoy this, I want it sweeter.
But like I said, if you like it dry,
you can skip over the sweetening aspect and not worry about it.
However, there is going to be one other thing we're going to do to this.
And you want to stick around and see that.
Right, because I think that final step is going to be
equally applicable to whether you like dry or sweet.
Yes.
But I want it a little sweeter, so I'm going to add some sugar.
This is just plain old white table sugar.
And we're going to use the try-it-as-you-go method for sweetening.
Now, I don't think this needs a tremendous amount of sweetening,
so I'm just going to start with a little bit.
Maybe a quarter pound.
Like that.
I don't even think that was a quarter pound.
Probably like half a cup.
I don't really measure on purpose.
And I'm going to mix this up.
Yes, it was sanitized.
Notice I cut it.
If you don't mix it up at this stage,
you're not going to get a true idea of how sweet it is.
You might end up with something that's too sweet
because it didn't get fully mixed in.
Now, one caveat to doing this.
We added real fermentable sugar
to something that still has yeast in it
that probably hasn't reached the tolerance.
No, it hasn't.
It was 71B.
Has not reached the tolerance of said yeast.
Therefore, what can happen?
Well, it can re-ferment.
So we definitely want to pasteurize this or stabilize it in some way.
Our preferred method, obviously, is pasteurization,
which we will get into in a little bit.
When you're stirring like this to mix sugar in,
you really don't want to disturb it much.
You don't want to oxidize.
You don't want to take many chances.
Is there always a risk?
Of course there is.
There's a risk every time you take the lid off.
There's a risk every time a breeze goes through your front door.
But don't let that risk stop you from doing things.
OK, so like in this case, we've opened this very infrequently.
We've taken very little chances with it.
It's probably still got a good amount of gas in it
because we didn't degas.
So I'm not as concerned about this kind of stirring that barely breaks the surface.
But now I don't hear any more granules.
So I think I'm done mixing.
That is one of the benefits of back-sweetening with sugar,
is that it's a granule.
So when you're stirring, you can feel and hear the crunchiness on the bottom.
So you don't need a visual to tell you if it's done.
You can use all your senses to tell you if it's been incorporated thoroughly.
Many of you may be surprised by this, but it smells exactly the same.
I think that's all I needed.
That is beautiful.
Before we get to the next stage, I would like to take a reading
so that we can tell them exactly what that final gravity is.
Yep, so let's take a note that we racked it and we back-sweetened it.
And I will get the hydrometer stuff out.
Okey-doke.
So you might be wondering why we're going to take a reading now
and why I didn't measure the sugar.
It's because if I had said, I'm going to use X amount of sugar,
but what if we had 128 ounces, 120 ounces, 110 ounces?
It could change that perceived sweetness.
And if we tell you that, and you have a few ounces different than us,
it could change the perceived sweetness on your end, too.
So I'd rather give you a number that you can shoot for,
which is going to be the gravity reading, rather than an actual volume.
Does that make sense?
Because if the two volumes don't match, then it's not the same thing at all.
So if I give you a specific gravity, you can actually aim for that.
And then everything matches and it all tastes the same.
Supposedly, more or less.
Okay.
My guess for this, by the way, is that I think this is at like 1.006.
I don't think it went any higher than that.
But that's what I think.
We're seeing how good my palate is for those sort of things.
And I probably didn't even need to use the bass drum.
Now, if you have watched our older videos,
you will notice that our graduated cylinder is different.
We switched from plastic to glass.
Brewer's Elite, who has been our hydrometer company of choice,
we've been using them nearly since the very beginning.
Yeah, since before they gave us the cylinder.
Offered us their newest kit that has the glass cylinder.
And we really like the glass cylinder,
because it is actually significantly easier to read.
Wow.
I am shocked.
It's 1.002.
I was off by four points.
That's unusual.
This, for some reason, even when it was completely dry at 0.996,
tasted much sweeter than it should.
I think the fruity notes are really coming through in this.
And that gives a perception of sweetness,
regardless of whether there's actual sugars in there creating the density.
And that can come from, you know, when everything's in balance.
You have your sweetness, your acids, your tannins all in balance.
It makes it taste better.
Therefore, you don't need it to be as sweet.
It's been said pretty often in homebrew
that if you make something sweet enough, almost anything can taste good.
And that is actually true.
And that's where a lot of, like, beginner mead recipes are very sweet.
So that you'll appreciate it.
Because dry is a much more acquired taste.
I'm not going to pour that in there.
Dry is more acquired taste for most of these things.
I know some people that absolutely love dry, will never drink anything sweet.
And I know other people that only drink sweet and will never drink anything dry.
It's going to be a little bit of each.
Yeah.
Depends.
This to me is sweet.
But it's not overly sweet.
It has a sweet flavor.
Which is kind of interesting because it's only, you know, I wrote 1.004.
It's 1.02.
I was wrong even there.
So I'm pretty happy about that.
That also means there's less sugar in this.
So less calories too.
But anyway, let's get a fermenter so that we can put this into it for pasteurization.
Alrighty.
All right, so it's back in a fermenter.
Normally we use our closed mouth fermenters because I feel the glass is a little bit stronger.
But because we have something else we want to do with this,
and I don't want to have to rack it again for no apparent reason,
we are going to use this fermenter.
We'll find out how it works.
I am going to leave the lid on because I feel like the open mouth,
that must allow more evaporation than others.
So I just feel like it.
But I've also started leaving the airlocks and bungs in them.
And it bubbles a little, but it doesn't seem to hurt anything.
Doesn't seem to affect anything.
And they don't bubble too fast.
Again, when you pasteurize, it's all about temperature control, okay?
We have a video on it, but just a very quick summary.
This will go into a pot with water enough for our immersion circular.
Some people call them a sous vide, but it's actually an immersion circulator.
And it'll be full up to probably about here.
I heat that water to 145 degrees.
That will get this to about 140 degrees internal temperature.
Once this hits 140, let that go for 15 to 20 minutes.
Take it out of the water.
Set it on something wooden that isn't like metal or rock,
because you don't want to crack it.
It is a little bit warm.
And let it come back to room temperature.
Put it back on the shelf.
You're good to go.
Once it's cooling, I do watch the airlock,
because sometimes they'll want to suck backwards because it's, you know,
Creating a vacuum.
Contracting.
That's what it's doing.
And it is creating a vacuum of sorts.
So I do watch that.
And I'll just pull it out and put it back in and let it re-evaluate itself.
But that's the idea.
But we do still have one more step that we're going to show you after that.
So stay tuned.
But now we're going to go pasteurize this.
Okay, so it's been a few more days.
We pasteurized it.
Can't tell if it cleared out at all, but it's super dark.
It's a very dark wine.
But here's what we're going to do.
We're going to do our final tasting today.
But there's still another step.
So this video is going to finish today.
But there's another step that you're going to see in a couple weeks.
In a separate video.
Okay.
Clear as mud, right?
Speaking of clear.
Oh, it might be dark.
But it's clear.
That is ruby clear.
Like, it's gem-like.
Yeah, that's what we were after.
That's my favorite.
What's your favorite?
The super dark, ultra vibrant.
It's red.
It's garnet.
On clarity, yeah, it's like a nine.
Like, you can sort of see through it if you hold it up to the light.
It is really dark.
It's just very, very dark, yeah.
Give it a little swirl.
Give it a nose.
Okay, it's Concord wine.
Without a doubt, I get Concord.
But there's so much more going on.
It smells a little more complex than just a straight Concord wine.
If I put this next to my Sweet Red, it's similar.
But it's not exactly the same.
It almost smells like what we intend to do to it already.
It kind of does, yeah.
More on that in a minute.
Let me take a taste.
Now, we sweetened this to 1.002.
By most accounts, we would consider that to be dry still.
According to some people with wine, though, this is just an off dry.
But it has a rich mouth-filling effect.
The sweetness is there.
The fruit flavors are coming through.
Wow.
The first thing I notice about it is the mouthfeel.
It has this beautiful velvety...
It just kind of gets in there and gets all your taste buds excited and ready to go.
It's rich and coating.
Yeah.
The fruit flavor really comes through.
And I'm even getting like some of the other spices that I get sometimes from a grape.
And that's like a cinnamon.
There's almost a touch of a clove feeling.
But it's not really like a clove flavor.
It's just like the feeling of clove.
And that is probably the combination of the fruit and the ethanol playing off each other,
making me think that that's what I'm tasting.
Yeah.
But I definitely get like even a dark cherry note.
Dark fruit.
Not just the grape.
It doesn't just taste like grape.
Plums.
Even like almost a dried fruit flavoring.
That smokiness coming through.
Yep.
All right, I'm going to sit this on top here.
No, I'm getting more.
Oh, you're getting more.
Yeah.
I just had to...
I didn't sanitize that section of the tables.
I wanted to sanitize the lid before putting it back on.
Just...
Yeah.
This is taking my sweet red wine, which was just like...
You make it in the bottle that it came in, you know, from the store.
And elevating it a bit with only a few simple changes.
If you don't want to do those changes, you can totally still make this.
It'll still be great.
Yeah.
This is not as sweet as the sweet red wine.
No, it is not.
By far not as sweet.
But it has more flavor.
It's much more complex.
It's deeper.
It's richer.
Now, if you're one of those people that's very...
How's a nice way to say this?
Hoity about your wine.
If you're very specific, you may not like this.
If you're somebody that's a little more open-minded and willing to try new things,
you may find that this is actually a nice experience for a wine.
I would say this is a very nice table wine.
Sure.
And if you had the ability to get your hands on a varietal grape juice,
rather than just Concord grape juice...
Yeah, you'd make a very nice version.
You could follow a very similar recipe and come up with something.
Kind of like when we did the Merlot.
Yes.
Similar concept.
And that's...
The Merlot kind of produced this.
We just wanted to see, what if we did all the same stuff that we did to that
with just a basic grape juice that's non-varietal?
Well, it's varietal, but it's not a known variety for making wine.
Right.
And honestly, it comes out really nice.
And the beautiful part about this is, if you like your wine sweet, you can sweeten it.
If you want it dry, we let it go dry.
So, you have that option still.
I just like that.
Customization.
You know, be like Burger King.
Brew it your way.
It's funny.
Recently, we've been really enjoying wine on ice.
And I know for some of you, that's probably just the worst thing I could say ever.
We're just lazy.
But I think it's because typically when we drink wine, we pair it with food.
And the food is really hot.
And having the contrast of something chilled is pleasant.
And particularly our sangria that's just so potent flavor-wise,
that the chilling effect really doesn't hinder...
This would be very good on ice.
...or take down the flavor.
But this is room temperature that we're tasting it.
And I am enjoying it...
Yeah, I think this is great.
...just as much as I am the chilled version.
When I really think about it, I get cherry, plum, moderate Concord grape flavor.
The ethanol is coming through a little bit.
This is 13.5%.
I do taste the ethanol flavor.
And I think that's a nice balancing act in this one.
There's a really lovely tannic component
that makes your mouth kind of pucker just a little tiny bit.
You know it's there.
But it makes you feel like it's very thick.
Because obviously it's not actually thick, but it feels viscous in the mouth.
I think we succeeded.
I mean, I can't imagine how...
Oh, wait.
I can't imagine one thing that we might be able to do to this.
But as it is right now, we need to put a score on it.
We do.
Okay.
I have a number.
Do you have a number?
I do as well.
One, two, three.
Nine.
It's a 10.
I know what we're going to do to it next, but to me it's still a 10.
This is beautiful.
This is wonderful.
Yeah, and I cheated.
I gave it a 9 because I do know what we're going to do next.
Yeah.
Do next.
So she wants to leave room for the 10.
I wouldn't leave.
That was a word.
I'm leaving room for an 11.
All right.
That's how I'm seeing it.
That's fair.
I'm okay with that.
Well, our sweet red wine was one of my top five favorites last time we did this.
This, I think, knocks the sweet red wine out.
This took its place.
It's just that little bit better.
Now, those of you that haven't figured it out yet, that thing that we're going to do,
we're going to add some wood to it.
And we didn't do this initially because I wanted to see what this was like without.
To see, does it really need it?
Because we did add wine tannin, which is essentially ground up this, ground up wood.
Now, what this is, is French.
And it's really hot.
I'm sorry.
That is a French oak, sherry infused French oak.
Derek will say where it's from.
Barely, barrel char wood products.
There you go.
And we have, we'll have a link to it below.
We don't actually get paid by them.
It's, they're, they're kind of a sort of sponsor.
They send us some stuff once in a while.
But I soaked it in some hot water to sanitize it and to get some of the tannins out so that
it won't over tannin.
And we're just, we just dropped it in like you saw.
So lots of people ask, well, how long should you leave it in there?
And that is a good question.
Unfortunately, we don't have a good answer for that because it varies greatly depending
on a multitude of factors.
One of them being your taste.
Right.
That's certainly one of them.
One of them being how much alcohol is in your beverage.
One of them being the temperature range.
Not only what temperature you're at, but does that temperature fluctuate?
All those things are going to change how quickly or how slowly the essence of the wood is
extracted into your brew.
Yes, she's absolutely right.
If it's warmer, it's going to extract faster.
If it's cooler, it's going to extract slower.
Higher alcohol is going to extract a little bit more and a little different.
It's going to extract different flavor compounds than if it was lower alcohol.
So all those things come into play.
We have found French oak to be far and above our favorite for an average oaking.
There is one, the Amarana, but that's very specific.
I didn't think those flavors worked as well with this.
It's kind of like French toast flavors.
It could be nice, but I didn't want to mess it up.
There was talk.
Erica wanted to pull one bottle without the wood.
And I said, but here's the thing.
We're only going to leave the wood on it for a couple of weeks, probably.
And we didn't want to have an excessive headspace that the removal of one bottle.
Yeah, that was my biggest worry.
So we didn't do that.
But stay.
Don't fall.
OK.
I need to dry the lid.
And you put the.
I put it.
I took the notes and did the thing.
OK.
All right.
So that is it for our upscale cheap wine.
But we will have an additional video coming up soon.
It'll be a couple of weeks once this has time to sit.
We'll do another tasting and see if this really does get to 11.
But in the meantime, as always, guys, thank you so much for watching and have a great day.
Bye bye.
