Back In School Bus Conversion - Kobuk Is Back - Getting Back To Work On Skoolie Projects - S3E1

Enjoy RV and Van trips
18 followers
2 Video Views·Oct 5, 2025
I am finally back at it after a 3 week break from all work. I rented a camper van in the UK to bounce around and take some time off. Now that I am rested, it is time to get back to work to get the bus ready for the Bus Fair in Oakridge Oregon. Also, thanks to Billy over at Nicklehandcraftedcom in Phoenix for his help with the bus!
Well, hello everybody. So, just giving you a little bit of a catch-up of what's been happening. So,
just got back from Europe. Did a trip over in Ireland and Scotland. Rented a camper van. It was
a very interesting experience driving on the other side of the road in a camper van that was a
manual. Took some time to get used to. That video will actually be coming up later. I just wanted
to give you an update to what's been happening. Now that I have taken two or three weeks off,
I am very excited and very into getting this bus cleaned up. Projects finished. The video
today is actually getting some projects done. Battery bank. Other aesthetics with the bus.
Gonna start painting. Where I'm at right now, we're actually getting ready to do some woodwork.
So, gonna finish the woodwork. I will be showing the bus at the bus fair up in Oak Ridge, Oregon.
That's gonna be the 8th of June. So, just trying to get this thing ready to go. I'm gonna be
a lot of videos now. Now that I'm back on the road, a lot more live videos. So, I appreciate
everybody's patience. The time off was definitely needed. It was to the point where I didn't even
want to look at my email. I didn't want to do anything with the bus. Now that I'm rested,
ready to get back after it, gonna be producing a lot more content. So, thank you to everybody.
If you do have any particular questions for me about the bus, what I'm doing, what I'm up to,
leave that in the comments down below. I'll be doing, like I said, some live videos. So,
I'm gonna finish editing this video. Today is Tuesday, so it's gonna be coming out Wednesday.
So, thanks for watching everybody, and we will catch you soon.
I am currently at my friend Billy's. He does some metalwork. Actually, I'll show you right over here.
He's the one that helped me make this. So, once I get the bus painted,
these will be stainless steel on the side. Currently, it messed up a little bit right
there in the bottom, so he wanted to redo it. Also, what I might have him do
is do some custom metalwork in here, just some small things. For example,
up where the solar comes in, just make a metal sheath that goes up over there,
and then I can just screw that into the wall and unscrew it if I need to add more solar or whatever.
So, waiting on Billy to get here, but more importantly, show you something pretty cool.
Kobe's. Got Kobe's back. Got my buddy boy back. We got one more day here in Hot Phoenix. I'm gonna
be working with Billy today, then later tonight, I'm gonna be heading up to Flagstaff. There's the
Overland Expo, which I will go to, see if I can get some filming done, as well as a video tour
with a young lady named Sarah. She has a camper van, gonna film her rig, possibly shoot a podcast,
with her, and then over to Vegas to work with Wonderboom to get some woodwork done,
but we will get into that later. So, yeah, just waiting on Billy to get here, gonna go inside,
hang out. It's a little bit cooler, a little bit cooler for Kobuk. One of the big projects
with Wonderboom, we'll go ahead and say that, is get the AC head unit in. That way, I can get the
AC going and then test the solar capacity. All right, so back to work on the bus. What's going
on, Billy? What's up, man? So what you got going on there? Just making a template so we can cap in
this area right here. We're gonna cover this all out of stainless to kind of match what he's got
for the hot water heater, right? Absolutely, yeah. Something, well, that's the, back there is gonna
be the diesel heater. That's gonna be the, I didn't do a furnace. I'm just gonna do a dry heat
through that and then that'll also heat the radiant floor heating. Oh, sweet. So that's in that box
right there. Another project. Another project, another day. Then I'm back here getting these
batteries out because we are going to make a tray for the batteries. They were just moving around.
They are not really held in by anything. I definitely should have got this done earlier,
but what we're gonna do, well, right now, we'll see how it plays out, but make three separate
trays for the three different banks and then those will screw into the floor and it'll just be held
in by that tray and the batteries won't move around anymore and it'll be nice to get down in
here regardless and get this all cleaned up. And the last thing on the list, for those who've been
watching for a little bit, you know that Billy has a plasma cutter. So I'm gonna make one more
of these. So once the paint goes on, have a nice stainless Zeppelin II plate on the side, as well
as the original logo Billy did. That's gonna go on the front once we get it all painted. Still
trying to get with Wes and see if he's available to help me paint. He has a whole painting setup
with his bus and we're gonna be meeting up probably about a month from now. We'll see.
So what do you got going on there? Just drawing up this template that we made in the van and put
it in an AutoCAD so that I can cut this shape out and then we'll make a little van right down
the center here and we'll have our piece because it should slip right in. That easy, huh? That easy,
that's it. Well you mentioned van. No, not the van, the bus. Use the old school van. Yeah.
First time Billy and I worked together was on Zeppelin I, for those that don't know,
and that was my camper van back seven, eight years ago now. That was a long time. That's
getting older.
Yeah, I don't want to wait no more.
So finishing up here at Billy's, we have the new logo. One's going on the driver's side,
one's passenger. We have the darker metal here which works fine for me. Also this is what's
going to be going up over the spice rack. Velcro for the bottom to hold it in place
and then stainless screws to hold it in. So it's going to go right up there.
Yeah,
