How to make Rosé Wine at home. Super Easy!!!

Wine Chronicles
13 followers
#rosé #wine #drinks
Hello dear friends.
In this video I will teach you how to make the best Rosé Wine at home. The color and taste was fantastic.
Hello and welcome to wine wizardry. Today we intend to teach you how to make rose wine.
As you know making each video in the field of winemaking takes days and we aim to teach you
how to make various wines and other beverages on this channel. So if you enjoy our content
please subscribe to the channel and turn on the notification bell to support us.
Making this wine is straightforward. Anyone can easily make it at home.
This wine requires no special equipment or ingredients. For this video I use approximately
three and a half kilograms of red grapes. In this stage try to choose grapes that are clean
without any damage dirt or dust. If your selected grapes have dirt or dust
make sure to wash them beforehand. Keep in mind that there might be natural yeast called pectin
on the grape surface which exists if the grapes are not washed. If you wash the grapes we should
wait for them to dry completely. I used a transparent plastic container and I recommend
you to do the same. Keep in mind that mate blue or yellow plastic containers are used for storing
chemicals. Next we separate the grapes from the clusters. Having clusters during winemaking process
won't cause any harm to your health and it won't produce toxic methanol alcohol.
If you don't have enough time and the volume of your wine is significant you can keep the clusters.
Having some grape clusters in the wine adds a slight taste. Some people who prefer a heavier
taste can add a few empty clusters to their container but personally I don't do that.
We separate and discard damaged moldy or spoiled grapes and throw them away. During the winemaking
process we only use wooden or plastic containers. We need to wash all the equipment used in the wine
production with hot water without any detergents beforehand and wait for them to dry out completely.
This action prevents our wine from getting moldy. As we see I've separated the grapes from the
clusters. In the next step we start crushing the grapes. Since the grape seeds contain oil
never use a blender or other electrical tools. Breaking the grape seeds will release the oil
into the wine and greatly increase the risk of mold formation. Therefore we crush the grapes
with clean and dry hands. Now I use a wine hydrometer to estimate the sugar content of
the solution. If you don't have access to this tool it is not necessary to perform this step.
Instead taste a small amount of the solution to determine its sweetness. If your solution isn't
sweet add the necessary amount of sugar and mix the solution. The fermentation process is essentially
the conversion of sugar into alcohol but remember that yeast will die in alcohol concentration
above 17%. Therefore there is no point in overly sweetening the solution. As far as it tastes sweet
we are good to go. This line on the hydrometer predicts the alcohol content of the wine based
on the sweetness level of the solution assuming the fermentation has completed. This other line
also determines the amount of sugar present in the solution. Well let's continue. As you see
in the video the hydrometer tells me that under the best circumstances this wine will have about
15% alcohol which is the ideal amount for red wine. The initial sweetness level is also around 1.1
which is a very good number. Now I'm going to close the container lid with an airlock on top of it.
The airlock allows the gases produced from fermentation to escape the container while
preventing air from entering it. If you don't have an airlock available you can create one
using a simple hose. To learn how to make an airlock you can watch the video I have placed
on the screen or you can find the link in the description. If we have washed the grapes initially
we need to add yeast. I have explained the amount and the method of activating the yeast in a video
that is placed on the screen. You can also find the link in the description. After pouring a small
amount of water into the airlock place the container in a dark location at room temperature
which is 20 to 25 degrees celsius for seven days. The airlock will become active between 12 to 24
hours later and it will remain active until the end of fermentation. If you don't have a dark place
available to store the container cover it with a thick cloth. After that open the container once
every 24 hours and mix the wine. Repeat this process for three days. Since my container didn't
fit in the cabinet I had planned for due to its shape I had to replace it. Today is the third day
and as you can see grape skins have surfaced on the liquid and the airlock is also active.
Today is day 10 and as you can see my raw wine is in the middle. Most of the grape skins settle
on the surface and a portion at the bottom. Since I want my wine's color to be more reddish
rather than pink today on day 10 I'm separating the grape skins from the white. Allowing the
grape skins to contact the wine for a shorter period of time will result in a lighter color.
Alternatively the grape skins can be left in the wine until the end of fermentation
which results in traditional red wine. I will also teach you that through a separate video.
I used a net basket with small holes to separate the grape skins from the wine. Initially I mixed
everything together. Then I poured a portion of mixture into the basket and pressed it until the
grape skins were completely dry. Then I repeat the process until my raw wine becoming entirely
clear. Now I wash the container with hot water and let it dry. Afterwards I return the raw wine
into the container and let it rest for 20 days in a dark place at room temperature.
Today is the 30th day. My red wine is ready to be transferred into bottles. Initially I have placed
the container at a higher level than the bottle very carefully and very slowly. As you can see
there is a very small portion of sedimentation at the bottom. In order to prevent the sedimented
portion from getting transferred into the bottle I have used a thin hose connecting one end of the
hose about the centimeter above the bottom of the hydrometer as shown in the video. Then I start
siphoning process by a gentle suction on the other end of the hose. This is the part I didn't siphon
and I don't need it anymore. From three and a half kilograms of grapes I have made two liters of wine.
Now it's time for final measurements. The hydrometer indicates that there is no sugar
left in the wine meaning that the fermentation process is complete. As a result my wine now
contains approximately 15% alcohol. It is now time for me to enjoy a glass of rose wine.
I really love the color. Tastes fantastic. The combination of wine and chocolate
is indeed a perfect recipe for happiness. Thank you for watching the video. If you enjoyed the
video please give us a thumbs up and subscribe to the channel. If you had any questions you
can ask it in the comment section. Until the next video goodbye.
