20' X 35' House Design in Sketchup for Beginners || Tutorial in Hindi

Decor Design 3D
20 followers
Oct 1, 2025
Hello everyone, I welcome you all to our YouTube channel.
Today I'm going to make an elevation for you all.
Let's go to Sketchup and start making the elevation.
Our Sketchup welcome screen has opened.
From here we will choose our template on which we have to work.
We have to work on feet and inches.
Either we will choose Simple Inches or Architectural Inches.
I will select Simple Inches.
First of all, we will check our units.
We will go to Window, Model Info and set our units.
Our units are set.
Now we will go to Camera and do Parallel Projection.
Then we will go to Toffeo and start making this plan.
Now I will take Tape Measuring Tool.
I will apply guidelines on it.
Its length is 35 feet from here to here.
And its length is 20 feet from here to here.
And its outer walls will be 9 inches.
9 Inches
And we are putting it inside.
9 Inches
And this porch is 8 feet from here to here.
And its inner wall is 9 feet.
9 Inches
And its kitchen size is 5 feet 9 inches.
We will give 5 feet 9 inches from here.
And its inner wall is 4.5 inches.
And its drawing room is 9 feet 6 inches from here to here.
And its inner wall is 4.5 inches.
And its drawing room is 8 feet 10 1.5 inches from here to here.
And its inner wall is 4.5 inches.
If we want to make elevation, we will work on front walls only.
We will not work on back walls.
Now we will make walls.
We will make walls with the help of Tritangle Tool.
Now we will select it with the help of Select Tool.
And press Delete with the help of Keyboard.
Now we will press Delete with the help of Keyboard.
Now we will erase these extra lines with the help of Eraser.
help and then give height to these walls of 10 feet now I have erased all the extra lines
now we will create space for window door here the door is D its size is 3 feet 6 inches
so we will take this tape measure tool and use it to draw a guide line 3 feet 6 inches
this is rectangle tool we will use it to make a rectangle and select it and erase it with
the help of eraser and then we will check the size of this window it is W window size
is 4 by 4 so we will put this guide line in the center 2 feet we will take this rectangle
tool with the help of which we will make a rectangle and erase it now there is a door
here we will make a rectangle and put a guide line first this is the space here we will
take rectangle tool and erase it now there is a window here let's see the size of it
it is 3 feet so we will give it space of 3 feet we will leave space of 2 feet from here
and then we will make a window of 3 feet 3 feet and here we will take rectangle tool
with the help of which we will make a rectangle and we will erase it now we don't need guide lines
we will erase it now we will see its elevation now we will create a space of this main gate
it is 5 feet from here the remaining space will be for the main gate so we will make a space of 5 feet
and we will make a gate on it we will erase it now we will do push and pull
and I will give it a height of 10 feet now we will remove the space of the door and window
here was the door we will take this tool in the tape with the help of which we will put a guideline of 3 feet
this is the line command with the help of which we will put a line and we will do push and pull
and this window was its size 4 by 4 I will take this tool in the tape 3 feet and the size of the window was 4
4 feet I will put a line with the help of which I will put a line now we will do push and pull
and we will erase this line now after this is the door
door was 9 feet we will put a line with the help of which we will put a line 3 feet
we don't need all these guidelines we will erase it
triple click and right click reverse face
reverse face now we will make a group
make group now we will make a slab we will do push and pull 4 inches
now we have to make the first floor first and ground floor are the same
in that we have to create the space of this balcony terrace now
click on it triple click and let's make it a group
group
three feet six inches
now I will make a rectangle on it and I will minus it from it
people come out I will do it on the side now with the help of the move command I patched the move
and I don't need this now I will make a core slab
four inch
triple click make group
um
x-ray mode on
yes
control
it's a bit small so we will turn on the X-Ray mode and scale it from the center point
this is the center point, it's fixed now
we will turn off the X-Ray mode
there is a window on this side, we will copy this window
now we will select all of them and copy them
we will make it the first floor
we will copy all of them
select all of them
now we will press CTRL
with the move command we will press CTRL
now our floor is copied, we will put it on top
and the one I made will come on top
now I will put it on top
now we will select this one
with the move command and with the help of this
we will put it on top
same here
now you can see that there is no wall here
we will go to the group and
I will minus this
I don't want this wall here
this wall is here
now we will work by looking at its elevation
we have to make the elevation of this image by ourselves
now you have to guess
what is the length of this
so we will take this tool in the tab
with the help of this we will put a guideline
we will see from a distance that how much we should take
we will take this 1 feet 6 inches
and this wall is up to here
up to here
now what we will do
we have to remove this wall
we will take this wall up
how?
first we go to this group
we will minus this
we don't want this
and we go to this slab
we will put a line here
we will paste this line
we don't want this
and we will put a line here
we will take a rectangle tool
and we will put it inside
push pull
we have done
now we will go to this group
I will put a line here
now I will take a push pull
I will put it on top
first we have to make a rectangle on it
a manic rectangle
now we will push pull
and we will put a line
we will take a line from here to here
this is the white part
this is this part
and this is this part
we will push pull this too
4 feet
first we come out of the group
we will put a line here
first I will go to this group
I will make a rectangle on it
now I will push pull this
4 feet
this is left
how much is left?
6 feet
from 10 we minus 4
6 feet
6 feet is left
we will bring it back
height
all
this is also created
and this is also created
now we will make this balcony
now I will make this part
green balcony
first we will go to this group
in this slab
right click
I will take this
I will take this tool
I will put a guideline
9 inch
here I will make a rectangle
and I will push pull it
1 feet
then I will push pull it again
by pressing ctrl
2 feet
and this line
this line you can see
we will give it
by pressing ctrl
2 inches
meter
is created
now we will make the design
in this
in the middle
we will check
how can we make
we will leave from here
1 feet
and from here
also feet
then we will see
what size
4
5 inches
from here
we will leave
6 inches
and from here
4
4 inches
now we will see rectangle tool
this is rectangle
now we will copy it
then we will take
guideline
5
5 inches
is ok
now we will take selection tool
we will select these lines
by pressing ctrl
we will take
move command
by pressing ctrl we will copy it
and
by pressing ctrl
we will copy it
again
and we will
move it
and by pressing ctrl
we will
paste it
now we will
give offset
offset
1 and a half
1 and a half is ok
we will give offset
now we will make middle
from here
we will take
1 feet 6 inches
and from here
we will take
1 feet
6 inches
and same
we will make rectangle
we will give offset
we will give
offset
we will give
offset
1 and a half inch
1 inch
we will
minus it
we will take
push and pull
and
we will
give edge
now we will double click it
it will be minus
double click
now we will
push it little bit
1 inch
double click
and
it will be glass
we will push it little bit
it will be glass
we have made it
now we will
come out of group
and
we will erase
these guidelines
we don't need it
now we will make
this
now we will
from here
1 feet
6 inch
we will make rectangle
we will go to group
we will make rectangle
and
we will put push and pull
5 inch
now we will work on top
I will go to this group
here I
I have given
this tool
I will put
we have given
1 feet 6 inch
and
from here
9 inch
I will make rectangle
and I will
minus it
and now I
come out of this group
now I will go to this group
and I will
push and pull
first I will make
rectangle
now I will push and pull
and I will do
10 feet
erase this line
from here
I will give
this tool
I will take
1 feet
and I will make rectangle
now it is done
first I will make
balcony then we will make
I will come out of this group
delete this
now I will take
this tape meyer tool
and I will put
9
9 inch
and from here
I will give 9
inch
from here also
9 inch
now I will go to this group
I will make
rectangle
from here
I will make one here
one here
erase these lines
now
I will push and pull
how much
1 feet
and
this small line
I will create
I will push and pull
and I will press
ctrl
2 inch
first I will make a wall
I will come out of this group
now I will
push and pull
3 feet
from here
9
9 inch
now I will make rectangle
now I will push and pull
from here also
with the help of guideline
I will give
9
9 inch
I will make a rectangle here
this guideline is wrong
I will put it again
9 inch
and I will take
rectangle
I will push and pull
how much
I will make this design
first I will go to this group
I will put a line here
and I will push and pull
from here
I will take another tool
and I will put a guideline from here
9
inch
I will make a rectangle here
I will push and pull
first I will adjust
adjust
I will make a rectangle here
push and pull
10 feet
push and pull
10 feet
Now let's make this part, I will come out of this group, now I will guess how much distance I have to put, I will take 6 inch and I will take 9 inch.
Now I will take 4 inch and I will make a rectangle and I will do push and pull and I will make a component, make component.
We have to copy it there, the advantage of making a component is that when we change it in one, then the rest will change a lot.
So first I took the distance 6 inches from here, so I will put it on this side too, 6 inches, now I will copy it.
I will select it and I will copy it with the help of the move command, I will press ctrl along with it, it will be copied and I will put it here and I will put the sign of divide, the sign of the slash on our keyboard and I need 20, enter.
Now I will go to this group and I will do push and pull, now the advantage of this is to make a component, look at this, the advantage of this is to make a component.
This is our design, now we have to make this balcony, how will we make it, first we delete it, we do not need these guidelines, now we will take the guideline, this was 1 feet,
Now what I will do, I will select these lines first, I will make another circle, I will take 1 inch, now I will select these lines, I will select all the lines by pressing ctrl.
Now I will take follow me command and I will make this circle follow, now I will take this line again by pressing ctrl, these three lines will be selected and then I will go follow me and I will make this circle follow.
Now I need these rods below, 1,2,3,4,5,6, there are 6 rods, I will copy it to the bottom, first I will group it, sorry I have not grouped it and it is attached to it, I will do ctrl.
now I will take a circle from the center, it will be 1.5 inch, I will take 1 inch circle below it, now I will select these lines by pressing ctrl.
Now I will take follow me command and I will make this circle follow, now I will take follow me command and I will make this circle follow.
Now I will group these rods, I will select it by pressing ctrl.
Now I will select it by pressing ctrl.
Now I will select it by pressing ctrl.
