Mad City Modern P.O. Box 7695 3902 Milwaukee Street Madison, Wisconsin, USA 53707
Follow Me On Instagram! / madcityfurniture
Follow Me On Facebook / madcitymodernpatreon: / madcitymodern
Comments are disabled for this video.
I found this old painted dresser in the trash, and it immediately gave me an idea.
It's not very often that an old furniture restoration plays a part in changing your
life forever. But this time, it did, and to my faithful viewers, I've been keeping a little
secret. This story begins just one block from my house, where I stumbled across a pile of
trashed furniture. But it doesn't end there. The second chapter unfolds 2,000 miles away
on a road trip across the country to the state of California. My name is Barry,
and it's good to be with you again. Let's see if you can figure out this story as it develops.
From the pile, I brought home the old hutch and the green painted dresser. I found a way to
temporarily repurpose the old hutch, so now I'll work on removing the paint from this old dresser.
Many of you know this by now. While I do work hard to honor the history of old furniture,
the truth is, my work is rarely just about the furniture itself.
Each project is a reflection of time, patience, and second chances, both for the piece and
sometimes for me. The wood and hardware may be a canvas, but the real story is about growth,
resilience, and the connections we make along the way.
Regarding my road trip, it's early in the morning, and I've left my home state of Wisconsin.
I'm now passing through the state of Iowa, and I still have a long way to go. Although I've been
planning this trip for several months, at this moment, I can't help but wonder if this was the
right decision. I also wondered if this old dresser would in fact be the right project
to help tell this story. I have a need for something here at home, and I think this
dresser might be the perfect donor piece. For this project, I don't plan to do a complete
restoration back to original factory condition. Instead, I want to focus on ways that we can all
simply save old furniture like this from the trash, and find new ways to repurpose it.
I don't plan to reuse these poles, so I'll measure the holes center to center,
and begin my search for something subtle and practical for daily use.
One of the first things I do with any painted furniture piece is test the paint for lead.
I'm using these swabs that require a little water,
and I'll rub these over the surface for 30 seconds in several areas.
To remove the layers of paint, I'll apply a clean strips paint remover with a chip brush.
I'll let this sit for about 15 minutes before scraping the paint with a plastic scraper.
On my journey, I passed through Nebraska and Wyoming, two states I've visited many times.
I was sure to make a quick stop at the Salt Flats in Utah before continuing on to my final
destination. In one sense, this painted dresser is just a basic, mass-produced piece of furniture
from the early 1900s, not worth much once refinished. But what I enjoy about each project,
big or small, is the opportunity to sharpen my skills, while at the same time,
document a part of my own journey. And this project is one more important piece of the puzzle.
Well, I made my way through Nevada and into California, stopping at Lake Tahoe not far
from my final destination. The trip was both for business and pleasure, and perhaps I'll share a
longer version of my experience in the near future. But in a moment, I'll share with you
what I brought back with me, and how it ties in with repurposing this painted dresser.
To remove the chemical stripper and clean the surface,
I'll use No. 2 steel wool and Clean Strip's After Wash product.
I had several friends visit my workshop over the last few weeks, and many of them, for the first
time, helped scrape small sections of paint from this dresser, to see just how satisfying this
process can be. Some of you may be wondering how I make a living refinishing old furniture
that has little to no resale value. It's mostly through sponsored brand deals, so thank you
Lasfit for making this video possible. By watching the sponsored segment and choosing Lasfit,
you're choosing to support me and my small business, so thank you.
For several years, I've been putting miles on my vehicles traveling across the country to chase
down old furniture, so I'm excited to partner with Lasfit for today's video. Because here in
Wisconsin, rain, mud, snow, ice, and salt can quickly destroy the upholstery in my vehicles.
And for me, it's becoming more important to find the right products that help protect my investments,
and prolong the life of my tools and vehicles. These Lasfit floor mats have already helped
protect the floors in my truck. For years, I stuck with Weathertech, because honestly,
I thought they were the best. But recently, I made the switch to Lasfit, and let me tell you,
it wasn't just a small upgrade, it was a game changer. First of all, the fit is incredible.
These mats are laser measured specifically for my truck,
hugging every curve and corner without that awkward gap that you sometimes get
with other brands. They lay flat, don't shift, and the high edges keep all the mud,
salt, and slush contained, so no more runoff pooling near the pedals. Compared to Weathertech,
I've found that the Lasfit mats are thicker and feel more durable under my feet. Most importantly,
I've noticed less slipping and more control. Lasfit floor mats are often praised for their
balance of quality and affordability, making them a strong competitor to the more established
Weathertech brand. So be sure to check the link in the video description to see if Lasfit offers
products for your vehicle, or visit lasfit.com and use code MCM20 for 20% off your order.
Thank you, Lasfit, for making this journey possible. I'll glue up some of the separated
dovetail joints on the sides of the drawers, but as I do, it's time to share with you what
I brought back from my trip, because I'm going to need your help with one important task.
I want you to meet the newest member of the family. He's a 9 week old blue merle Australian
shepherd, and I have specific plans for him that I'll share in the near future.
He's already been a great companion for Koda, a rescue I've had for 9 months. At the moment,
this guy doesn't have a name, and that's where I need your help. I'd love to hear your ideas in
the comments section for this video. So what does all that have to do with the dresser I'm
currently working on? Well, my countertops seem to always be piled high with leashes,
dog food, toys, and other pet related items. As soon as I saw this old dresser in the trash,
I knew it would be the perfect piece in the house to store all the items I mentioned.
This should provide adequate storage, while still preserving the natural beauty of the oak
on this 100 year old treasure. I'll use an orbital sander to sand each section from 150 grit to 180
grit, then use a sanding sponge to gently round off any sharp edges. For this piece, I won't spend
days picking paint from all the crevices. I just want this to be functional while still preserving
I believe they'll be functional for daily use. I'll spray them with a gold lacquer, and once dry,
I'll spray on a coat of black lacquer, and wipe it off immediately. I hope to give these a worn
look, and although I wasn't completely satisfied with this technique, it was an opportunity to
try a new method. I think I'll eventually remove these, and add period correct drawer pulls when I find some.
Here are a few examples of the normal wear and tear I'm hoping to preserve on this well-loved
piece. I've chosen not to stain this dresser, but instead just apply a clear protective coat,
so I'll cut a cotton rag to wipe on this waterlox product. Waterlox is a wood finish that's been
around since the early 1900s. It's based on tongue oil, which penetrates into the wood fibers,
and is blended with a resin that helps protect and enhance the natural beauty of the wood.
I've chosen to keep this passion project short and simple, because I'm preparing weekly projects
from now until Christmas. My name is Barry, and I can't thank you all enough for your love and
support. I especially can't wait for your name suggestions for this newest addition to the family.
I'll see you again very soon. Goodbye for now.