D4EA TUCSON diesel timing mark

D4EA#
The D4EA engine is a diesel engine used in the Hyundai Tucson, and the timing marks may vary depending on the specific model and year of the vehicle. Here is some general information on the timing marks for the D4EA engine:

1. The timing marks are typically located on the camshaft sprockets and the crankshaft pulley.

2. To set the timing, rotate the crankshaft until the timing mark on the crankshaft pulley lines up with the TDC mark on the timing cover.

3. Next, align the timing marks on the camshaft sprockets with the notches on the timing belt cover. The intake camshaft sprocket mark should be at the 12 o'clock position, while the exhaust camshaft sprocket mark should be at the 6 o'clock position.

4. Install the timing belt, making sure that it is properly tensioned and aligned with the timing marks.

5. Rotate the engine by hand a few times to make sure that the timing belt is properly seated.

It's important to consult the specific service manual for your vehicle and follow the recommended procedure carefully when setting the timing marks on the D4EA engine. If you're not comfortable or experienced with this type of work, it may be best to have a professional mechanic handle the task for you.