Hyundai Palisade Mechanical Review

The Auto Geek
46 followers
23 Video Views·Oct 18, 2022
Today we're going to be reviewing the Hyundai Palisade. Now while most car reviewers would
praise the Palisade for being an excellent family hauler and mall crawler, we're going
to be taking a look under the hood and underneath this Palisade to see what's inside and how it
works. Now we're going to start under the hood where we have Hyundai's Lambda V6 engine. This
is the 3.8 liter version of it situated transversely for front wheel drive and it's
mated to an eight-speed automatic transmission located underneath the battery and the airbox
here with a transfer case to feed the all-wheel drive system. Now taking a look at some of the
components under the hood here, it is pretty generic for any front-wheel drive V6 vehicle.
We've got our washer tank and coolant tank over here and pretty much nothing else on this side.
We've got the ABS actuator over here. Over on this side we've got our brake reservoir
as well as our air intake and filter and the battery located on this side as well as the
fuse box and ECU. Now we're going to start by taking a look at the air intake system on this
vehicle. We've got fresh air drawn in through this duct here. It'll then get filtered out
through the air box here where it then goes through this tube and then into the drive-by
wire throttle body and then into this plastic air intake plenum before it feeds each of the
six cylinders of this engine. Now accessing the air filter is pretty straightforward. You just
have to pull this down, remove these two tabs here and then pull the air filter out. The tabs are
actually part of the air filter itself. Now with the whole air intake box removed you can see it
frees up a lot of space on top of the transmission side of the engine bay here. We've also got clear
access to that drive-by wire throttle body. Now looking at this plenum here it is made of
plastic as well as the lower air intake plenum that mounts directly to the aluminum head. Next
we're going to take a look at the fuel system on this engine. Now the low pressure fuel pump and
the tank as well as the filter is going to bring fuel up to this line here which is then going to
bring it over to the high pressure fuel pump which is this guy underneath this cover here.
This cover is just there to dampen the amount of clicking sounds you get from that high pressure
fuel pump. Now it's actually powered off of the intake camshaft on the front bank of the engine
here that's going to pressurize the fuel and send it back down this other pipe down underneath the
air intake plenum where it gets directly injected into the combustion chamber. Now because this has
only direct injection only fuel is not sent through the ports here to wash off the intake valves
which means that you could have a carbon buildup issue as the miles add up. Now taking a look at
the ignition system on this engine you can see it is a v6 engine which means that you've got
three cylinders on this side and three cylinders facing the firewall. The front three plugs and
ignition coils are fairly easy to access right at the front here and easy to change out. However
like most transverse v6 engines to change the rear three plugs it's located underneath this
plastic intake plenum which means that you have to remove this entire assembly and all the hoses
and change the gaskets. The coils would be located on the top of this valve cover. Now looking at the
lubrication setup on this engine it's pretty generic it takes 5w30 weight oil and the oil
fill cap is right here easy to access as well as the dipstick. Now taking a look underneath the
you can see most of it is pretty flat and covered up with the exception of the centerpiece. Now
that's good because it'll prevent salt water from splashing up rusting out components and also help
with aerodynamics. Now the thing I don't like is despite half of the oil pan showing you still have
to remove the rest of this access cover on this side in order to do an oil change. It would have
made more sense if they just put the oil filter and pan drain plug on this side where it's already
exposed. Now with the cover removed you can see you've got clear access to the engine on this side
and the transmission over on this side. Now taking a look underneath here we have a stamped steel oil
pan with the drain plug located over here. This oil pan is pretty shallow but we do have the upper
oil pan which is the aluminum part that actually bolts to the block. Now the oil filter is located
over here it's a cartridge style oil filter. Now one thing I don't like is that this oil filter
housing is all made of plastic and with age and heat this is going to tend to leak especially
because this has to carry all of the oil pressure from the oil pump since it's the first thing in
the circuit that filters all the oil. Now taking a look at the front of this engine here which is
the passenger side you've got the drive belt set up and it's just a single drive belt which is
pretty straightforward. You've got the crank pulley down there, the water pump up at the top here,
then over the front here you can see the alternator and then way down at the bottom
there is the AC compressor access from below. Now changing out this drive belt is pretty
straightforward just stick a wrench on there to loosen off that tensioner and then you can get
access to this belt. Now the alternator is down in a pretty tight spot with the engine kind of
hanging over it from the top here and also being so close to the front of the vehicle.
Luckily though you don't need to remove the front end in order to access it you can access it from
down below but you will have to drop the AC compressor out. Now from the bottom here we've
got a better view of that drive belt setup you can see the crankshaft and the AC compressor as
well as your alternator located at the top here. Now reaching that alternator requires that you do
remove this AC compressor it's got a couple of bolts here and it'll drop down. Now hidden behind
that drive belt setup is even more importantly the timing chain setup. Now there's actually three
chains on this engine one that powers the front bank one that powers the rear bank and then one
at the bottom that powers the oil pump. Now this engine has double overhead cams with variable valve
timing on both the intake side which you can see here and the exhaust side underneath this cover
here. Now the intake side uses a forced solenoid in order to change the phase of the camshaft using
oil pressure while the exhaust side uses a more traditional oil control valve and that's actually
buried underneath this valve cover here. There's also another set of those at the back here and
I've already got another video on how variable valve timing works you might want to check that
out in the link above. Now the Palisades engine setup's got three main engine mounts you've got
one located on the passenger side over here supporting the engine the other one is located
on the driver's side here which supports the transmission on this frame rail and the third
engine mount is located at the bottom here it's called a roll mount because it basically prevents
the engine from rolling back and forth against those two top mounts. And now we'll have a listen
to the engine. Now next we'll take a look at this eight speed automatic transmission now looking
from the top underneath this battery tray here you can see these wires they're going to lead
to an electric motor that sits on top of this transmission and that's to select the gears
between park reverse neutral and drive because this is a shift by wire system there's no physical
cable that goes underneath the dash to the transmission. Now just next to that motor we
have the fill port which is this hex bolt here that you remove in order to fill transmission fluid
when doing a fluid change. Now Hyundai doesn't really want you to service their transmission so
there's no repair information available for it instead you just got to replace it when it failed.
Now the top here you can see these two fluid lines that will bring transmission fluid to get cooled
off into the radiator and then send it back out there's no separate transmission cooler here. Now
one thing I don't like about this transmission is that you can't easily check your transmission
fluid level and the quality to see if it's dirty you have to instead rely on the drain port and the
check port down below. Now taking a look underneath this transmission here you can see you've got this
plastic valve body cover now on the valve body cover we have this check plug here which is what
you would use to check the transmission fluid level the excess would drain out at a certain
temperature and then over here you've got the drain plug. Now this transmission uses an electric ATF
pump which is going to help in your idle stop mode to engage the transmission in the correct gear and
also gain some efficiencies. Now one thing you might have to service on this transmission pretty
frequently is the starter because this has the idle stop start system that everyone hates and it
might take a toll on the starter over a while. Now it is located right above the automatic
transmission fluid pump and it is pretty easy to access with just a couple of bolts and it'll drop
down. Now once the transmission is done shifting its gears it's going to send its power to the
differential which is going to ultimately power the front wheels through these axles that you see
here however this part over here is where the transfer case is located for the all-wheel drive
system. Now the transfer case has a fill plug located way over here and a drain plug because
you do have to service this transfer case fluid. Now it's going to transfer power directly to the
drive shaft located underneath the vehicle here at the back. Now that drive shaft is going to head
down to the back here to this rear differential assembly. Now this is where the all-wheel drive
system is going to kick in. We've got this little electric motor here based on certain parameters
it's going to turn on a clutch system here in order to send power out to the rear wheels through
these little axles. Now of course the axles back here are pretty small diameter compared to the
front because this is primarily a front wheel drive vehicle it's not a real four-wheel drive or
off-roader type of vehicle but don't get me wrong it can probably handle the occasional snow bank
at your grocery store parking lot. Now comparing the size of the axles this one's the passenger
side of the front you can see this one's nice and chunky and that's because most of the torque goes
to the front wheels here and the cv axle is then going to send power to these rear hubs here which
are luckily a bolted on design so if you have to change bearings it's pretty straightforward and
you don't need a press. Now taking a look at the front suspension setup on the Hyundai Palisade
things are pretty standard here with the McPherson strut suspension that ties into this aluminum
knuckle. Now the bottom here you've got our stamp steel lower control arm as well as your inner and
outer tire rods and here you can see the sway bar as it comes out to the link. Now this type of
McPherson strut suspension is kind of expected in this class of family vehicle it is a very simple
setup which is going to last a fairly long time compared to say a multi-link or a double wishbone
setup like say on the Ford Explorer. Now working on this is pretty easy you've got your tire rods
which are easily accessible on the inside there as well as on the outside over here. We've got
our lower control arm here which is bolted once over here and one over there. Even the lower ball
joint is bolted onto that control arm so changing out the control arm and even the ball joint should
be pretty easy. The only thing I don't like about the ball joint is this pinch bolt design sometimes
it kind of gets stuck in there and a little hard to get out. Now with an aluminum knuckle you've
also got bolted on bearings you can see the bolts located over here so you don't need a press to
change it out. Now the front here you've got this long slender stabilizer link that connects up to
the strut and of course you've got a lot of room in here to work on everything bolts up to this
stamp steel subframe. Now the only thing I'd like to see here is more use of aluminum the way say
Nissan has done with their Murano. Using stamp steel here kind of screams cost-cutting measures
although this isn't really a luxury SUV. Now one thing I find very interesting especially with a
lot of newer vehicles is that the front subframe is actually just there to tie the suspension
components together. This one is a stamp steel design it actually doesn't extend anywhere
further in front of the powertrain assembly. In fact the only structural member that goes past
the powertrain assembly is this front frame rail here which joins to the bumper reinforcement
behind the plastic bumper skin. Other than that all this under here is your plastic radiator support
that supports the bumper the headlights and everything up at the front here. It doesn't
serve any structural purpose. I kind of wish they didn't use hard plastic here and instead use the
more sound deadening material like the carpet they use in the back. So you've got nice fuzzy
soft touch materials even in the well liners of the back. Now taking a look at the rear
suspension on the Hyundai Palisade you can see you've got a multi-link setup at the back here
and that's going to be good for handling purposes but probably not as solid for say an off-road
purposes or towing purposes like say a solid axle design but let's be honest that's not really what
this vehicle is meant for. Now all of these components back here are made of a stamped steel
design which is a bit of a cost-cutting measure over say the use of aluminum components. Now you'll
notice that the rear lower control arm we've got three different mounting points one for your
stabilizer link here's where your coil spring sits and the other one where the shock absorber sits.
Now these are all going to have different motion ratios which are going to be accounted for in the
design. Now working on the suspension shouldn't be too difficult we've got one bolt at the bottom
there and just two bolts at the top here if your shock absorbers do wear out they should be pretty
easy to swap out. And taking a look at the other components at the front here you've got our
trailing arm then the top here we've got our upper control arm then on the front here we've got your
front lower control arm that ties into the knuckle and then of course we've got that rear lower
control arm here so there's a total of four links that make up the suspension. Now the knuckle is
made of aluminum supposedly to save weight but it does have quite a thick presence over here
between the control arms and the actual mounting face of the wheel which is what's going to give
you a very big offset on these wheels. Now one thing I kind of find dangerous is this exposed
fuel filler neck if fuel is in here and something from the wheel kicks up and ruptures this it could
be a potential safety hazard I'd rather if they had it fully covered. Now taking a look at the
palisade suspension from underneath here you can see we've got a stamped steel subframe we've got
our adjustment for camber over here for this lower control arm and here we've got this little stabilizer
link that kind of plugs into the control arm here and the sway bar runs underneath here and ties
into the subframe over here at this bushing. Now here's a look at that trailing arm here where it
ties into the body at the front here at two points and then leads out to the knuckle here. Now next
we'll take a look at the exhaust setup now because this is a v6 engine there's going to be one bank
that comes off this way and the other bank that comes off this way it's a little difficult to see
but the exhaust manifold comes off of the head and then it goes directly into a catalytic converter
located over here. Now the same thing happens at the back here although it's a little difficult to
see where the catalytic converter is. Now here's a better look at that front catalytic converter from
underneath it'll then lead out to this flex pipe before joining up with the y-pipe underneath here
and just above that y-pipe is the rear catalytic converter the exhaust will then flow over this
subframe and into another flex pipe another catalytic converter and then out the back. Now that
exhaust is then going to travel over to this mid muffler and then out over here to this bigger rear
muffler and then out the tailpipe. This car has only got 3,000 kilometers and it's already building
up with sweat and now we'll have a listen to the exhaust. Next we'll take a look at the cooling
system of the palisade now this is pretty straightforward because this is a naturally
aspirated engine. Now we'll start here at the water pump which is pretty easy to access just
underneath this engine mount here you just have to remove these bolts here to get the pulley off
and then you've got easy access to all of the bolts here that bolt it directly to the block
at least it's pretty straightforward unlike other engines that drive it off of the timing chain.
Now off to the side here we have our coolant expansion tank and I'm glad that it's actually
just an expansion tank and not a pressurized system where the radiator cap is here it's on
the radiator where it's supposed to be. Now taking a look at the radiator itself it is buried inside
of this radiator cradle here which is actually made of plastic and we've also got the cooling
fan located at the front here. Now in order to replace this radiator you have to remove the
entire front bumper skin as well as this radiator support in order to remove the fan and radiator
as an assembly. Now taking a look from this side we have clear access to the fan here there's only
a single electric fan on the front of this despite this vehicle being so big. We've also got a look
at the upper radiator hose as it goes into this coolant pipe here as well as the lower radiator
hose. Now down here at the lower radiator hose you can see that it's got an electric thermostat
inside of this housing which means that the computer can manually melt the wax inside of
this thermostat to get coolant to flow a little bit earlier for better fuel economy. And from
underneath here you can also see that cooling fan and the lower radiator hose. Now perhaps one last
thing you have to worry about is that there's no active grille shutters behind this bumper skin
so that's one less thing you might have to replace if it gets damaged. In terms of electronics
complexity under the hood there's nothing really here that's extravagant for a 20th century vehicle
you've got your normal wiring harness sprawled across the top of the engine you do have a smaller
computer module located over here and then the main ECU is located over here. I like that it is
set back a little bit from the crumple zone so it's not the first thing to get damaged if you
get into a fender bender. Now over here you've got a nicely laid out fuse box that's even labeled
underneath here looks like these are even pre-wired for a trailer kit even though this one does not
have a towing package. Even the battery is right up at the front here nice and center easy to swap
out it's not buried in the fender somewhere. Now even despite the unique styling and placements of
headlights down inside the bumper it's actually pretty easy to get to the headlight bulbs if you
have to change them. Now here's a look behind the bumper cover at the headlight assembly
it's a pretty big unit and it's got these little heat sinks on the back here to cool off the LED
drivers although you probably won't be changing LED bulbs and have to change the whole assembly
if anything's wrong. They've even got this old school diagnostic port right at the top here
probably use that in the factory. Next we'll take a look at the brake system on the Hyundai Palisade
now things are very traditional here we've got a standard vacuum assisted power booster which
takes its vacuum straight from the air intake plenum there's no need for a vacuum pump like say
on a turbocharged vehicle. Now over here you do have a pressure sensor so that the computer knows
if there's enough pressure in there to hit the brakes for the autonomous braking feature. The
braking system continues from the master cylinder over to the ABS actuator located over here which
is responsible for your ABS your traction and stability control as well as the autonomous
braking features that this car has. Now speaking of autonomous braking there is a lot of sensors
on the front of this vehicle so if you ever get into a bumper accident and have to replace this
bumper skin it's going to be pretty expensive. You've got your radar sensor located on this
black piece down here you've also got your little parking sensors over here as well as a little
camera at the front here that's of course in addition to the sensor that you've got up at the
top of the windshield. Now taking a look at the Hyundai Palisade's front brakes this is a heavy
vehicle so as to be expected we have a dual piston caliper at the front here on this disc rotor.
Of course things can get pretty hot while you're racing this on the highway to go to school
you do have the obligatory vent here which is going to dry and cool air from the front of the
vehicle to cool off the brake. Now taking a look at the rear brakes on the Hyundai Palisade you
can see you've got our standard disc rotor with our caliper design you've got an electric parking
brake at the back here which actuates a gear set to squeeze these together when you actuate the
parking brakes. It's not something you usually like but it's going to be better than say seizing
up parking brake cables especially for the people who drive these probably won't even use
their parking brakes. Now the steering system of the Hyundai Palisade uses a column mounted
electric power steering motor. Now most of that is hidden because you can't really see it behind
this neat airbag but you can see the shaft go down to the steering rack and on this side of
the firewall you can see where that shaft goes down to the power steering rack mounted on the
subframe down below. Now there's an interesting gas pedal setup it's hinged at the bottom. Now
underneath the Hyundai Palisade you can see here we've got the plastic fuel tank we've also got
EVAP canister which is located just in front of it underneath that front cover there. I like that
they gave you a proper spare tire down here but I wish it was actually inside the vehicle
protected away from the elements. Now one interesting thing at the back here is you've
got your normal impact bar that's made of steel and that's tied together by the two frame rails
but then you've also got this other impact bar that sits a little bit lower that's probably to
prevent anybody from underriding this vehicle if it does get into a rear end accident. Now at the
top here you've also got your rear impact sensor so if you get rear-ended it'll activate your
active headrest. Overall I think Hyundai's built a vehicle that definitely serves its purpose by
giving people all the creature comforts and electronics on the inside with interesting
styling on the outside. However I think under the hood and underneath the Palisade Hyundai's played
it a little too conservative by just going with the simple V6 engine and an automatic transmission
as well as the suspension setup straight out of the Kia Sorento. However that could work well for
buyers who just want a simple SUV that's going to probably last fairly long because you've got
a naturally aspirated V6 and an automatic transmission as well as a simple suspension
setup it's going to be pretty easy to work on compared to say a turbocharged engine or a CVT
or any Ford for that matter. Now make sure you follow me on Instagram to find out what the next
car review is going to be and subscribe for more videos just like this one.
