F.P. Journe Octa Chronograph (R-OC PT 40 D RU) F.P. Journe Watch Review

Clockwork Chronicles
19 followers
#fpjourne #luxurywatch #luxurywatches
SKU: 5004861
The F.P. Journe Octa Chronograph (R-OC PT 40 D RU) is encased in 40mm of platinum surrounding a silver dial on a black alligator strap with a platinum deployant buckle. Features of this F.P. Journe Octa Chronograph include hours, minutes, small seconds, date and chronograph. This F.P. Journe watch also measures 10.5mm in thickness and 48.3mm from lug-to-lug.
Hi, this is Tim of The1916Company.com. Welcome and thanks for logging on. If you love this watch,
email me, TimOsso at The1916Company.com for purchase pricing and availability questions
concerning this watch. Today, we discuss the F.P. Journe Octachronograph Ruthenium edition.
There were five different models, each made in 99 pieces, 40 millimeters in platinum,
every single one of them, that comprised the Ruthenium collection. The Ruthenium watches,
all again, with gold Ruthenium-coated dials, 40 millimeter platinum cases,
99-piece editions, and Ruthenium-coated brass movements. There was the Octachronograph,
which you see here, the Jour et Nuit, the Calendrier, the Resonance, and the Torpillon,
and that was the set, 99 pieces of each. So, collecting one of each Ruthenium watch is a
superb pursuit for a collector who has everything or wants everything and can pay for it. So,
we have this 99-piece limited edition chronograph, 40 millimeters in diameter, in platinum. These
chronographs were made from approximately 2002 to 2006, and we'll talk about when this one was
probably made in a moment. 40 in diameter, 10.5 thick, 48.3 from lug tip to lug tip with a 20
millimeter spacing between the lugs. The Ruthenium series are handsome watches. They are aesthetically
pleasing, and they're a good size. The 40 millimeter case is versatile, and on my 16 centimeter
circumference wrist, it wears well. You can see in profile, it's thin with a domed bezel. It will
slide under a dress cuff. Here's your over-the-top shot, which inherently exaggerates the width of
any watch. This is your down the barrel and definitive angle. So, this is going to fit a
wrist as small as 14 centimeters circumference. Again, mine's 16 for reference. This watch has an
unusual upgrade, which is a F.P. Journe Deployant Clasp. Now, it's a friction fit clasp. Take a look
at the inside. You can see how it has this much warmer tone. This is white gold, and then the
buckle portion, the outermost component is made of platinum like the case. Journe uses white gold
here because it's a good match for platinum aesthetically, but also because gold is stronger
than jewelry-grade platinum. And so, for mechanical parts like this, it's considered
more durable, but also white gold is stronger than yellow or rose. So, it specifically is a
good match, not just aesthetically, but from a durability standpoint. Taking a look at the,
and this is a very expensive upgrade item. To go from a pin buckle to a deployant to Journe,
you're talking four figures out of pocket to make this happen. A really nice upgrade.
Taking a look at the case, you can see that we've got very similar aesthetic to the one that first
on the original eponymous FP Journe watches, the Tourbillon in 1999. So, we've got a domed bezel
with a pretty much mirrored case back. So, domed case back, domed bezel. Each one has a flange. The
flange define the mid case. So, under the flange, we have integrated Calatrava style lugs that turn
down 90 degrees from the sweep of the case band. Journe's knurled unbranded crown is now a bit of
a signature. So, you can see in profile that we've got three of them now, the double dimple knurled
crown at center, characteristic of Journe's work since the beginning. A classicist, he realizes
that historically great watchmakers didn't brand crowns. So, he doesn't brand his, but you know
who made it. In fact, if you look at it, it appears to me that the crowns on these watches are always
a little bit warmer in color than the platinum. I've long wondered whether these crowns are
actually white gold. And I think there's a good possibility they are. Taking a look at the dial,
okay, it is ruthenium coated, but it's made of gold. And then we have this silver, white,
silver section. So, the silver cut and then galvanized to create a silver white aesthetic,
but these registers are silver proper. And then we've got the distinctive Journe hands
and a chronograph. So, here is a 60-minute chronograph register, a feature I wish we'd
see more often on chronographs. The watch does feature a chronograph module that Journe has
added to his Octa-Automatic base, and it is a miracle of miniaturization. The chronograph module
is only one millimeter thick. It also includes flyback capabilities. So, you can reset and
restart without first stopping. So, if you're timing events that occur in rapid succession,
the flyback is ideal for that. We also have, let's just make sure we're not in the date change
danger zone. No, we were. So, you see, that's why we always roll past and make sure. But we have a
double-digit date, ruthenium colored, and you can see they're flush discs. And flush discs are always
a sign of a superior big date. Sometimes they're staggered. That's an older and kind of anachronistic
way of doing it. Flush discs are harder to do and thus more prized by collectors. So, you can see
that the system has a crisp instantaneous quick set mechanism. And the column wheel, and it is
sort of a column wheel that's used on this movement and its module. It's almost like a
flattened column wheel, where instead of having crenellated towers, you have a flat flower with
its petals flaring out. It's almost like a hybrid of a cam and a column wheel in terms of how it
works. If you can imagine a flower that has been flattened with petals radiating out in every
direction, that's how this particular, I guess you could call it a cam wheel, actually works.
It makes for very crisp actuation. If you want that characteristic column wheel feel,
this is a light touch chronograph, but you do get that crispness. Also important, I believe this is
an oscillating pinion, because if it were a vertical clutch, I would be utterly astonished
if a vertical clutch could be built into a one millimeter thick module. So, my thought is Jorn
probably does what he does with his other chronographs past and present. He used an
oscillating pinion, which is a very fine type of lateral clutch that has very little play.
It is possible he incorporated some sort of vertical clutch here,
but if he did, I've seen no evidence of it yet. Turning over, we have a case that indicates this
one was probably built towards the beginning of the run. Remember I mentioned these were made
from 02 to 06. Well, you can see this case was made in 02. Now, the code on the case doesn't
necessarily mean that's the year the watch was assembled, but it's usually fairly close.
Eleanor, a company out of France, you can see their maker's mark and also the French hallmarks
right here, double eagle, and then Eleanor to the left. But Eleanor would make the case,
would then go to Switzerland and be cased up and built as a watch. And so, at that point,
it would gain the Swiss hallmarks, which are right here. And usually, there's a close correspondence
between the year the case was made and the year the watch was assembled. You can see this one's
individually numbered out of 99. That's how they were all done. The rotor is 22 carat
or barley corn. And then the movement is part of the brass movement era of Jorn. So,
you already realize these watches were made a little bit past the conventional retirement
of brass movements at F.P. Jorn. The ruthenium series and the Zodiac continued to be built with
brass movements after the rest of the line had discontinued brass in favor of gold calibers.
In general, mid-2004 was the phase out, but for some of these limited editions,
brass lasted a bit longer. So, you have that ruthenium coat on the bridges. So, it's much
darker than rhodium plated brass. Big balance. What it lacks in beat rate, it's a three hertz
balance. It makes up for in sheer size and inertia. So, it's a very good timekeeper on that
basis. You can see it's five position adjusted. Jorn wanted to achieve chronometer-like timing
with his Octa Automatic. More on that in a moment, but it's a five position adjusted
free sprung balance. Free sprung means it's very shock resistant, so you can't change the timing
with a shock. There's no mobile stud index for that. And then it also allows for very precise
adjustment. So, 120 hours is the chronometric power reserve here, and Jorn decided that even
though the watch will actually run for 160 hours, almost seven days, he resolved to keep the
chronometric rating at five days, and here's why. Jorn has always said that it's impossible for an
automatic movement to keep chronometer time, because although during chronometer testing,
the movement will be worn daily, or I should say wound daily, if it is worn daily, what's going to
happen is it's going to find itself in a lot of different states of wind. So, whereas a chronometer
trial's automatic movement is going to be wound up every day and thus have exceptionally asynchronous
operation, an automatic on the wrist is going to be worn, taken off, picked up, put down. It's going
to sit and be worn for irregular lengths of time, and so you never really know what state the
mainspring is going to be in. So, given all those different states of wind and the variability they
can cause to force the escapement and thus timing, he wanted one super long mainspring. So, there's
one barrel, one meter long mainspring, and to avoid the pitfalls of a long power reserve with just one
mainspring, he used one that was super slim and calculated to create a torque plateau that stayed
more or less flat from maximum wind out to 120 hours elapsed. And so, without any kind of
differential or fusee or remontoir, he managed to create a more or less constant force to the
escapement on an automatic watch, provided it stays within that 120-hour power reserve window.
So, instead of worrying about the state of wind up and down, you have a lot of consistency here,
and for most states of wind, it will keep exactly the same time, isochronous operation,
and thus chronometer caliber timing in an automatic movement. And that really is the point
right here. It's also a big movement, properly sized for this kind of case. It's 30.8 millimeters
with the one millimeter extra thickness on the top. Remember, 30.8 is the diameter, 36 joules,
and then you can see that it's the first version of the Octa 1300, which means bi-directional
automatic winding rather than the later unidirectional, which came on line about mid-2007,
and a brass movement rather than later gold. The finishing is rustic, and you can see even
without magnification, that's the case on the Bevels, but you buy these Jorn watches for their
innovation and because they pushed the limits in watchmaking, and also because of the profound
influence of the maker behind them. The only feature it does not have is hacking,
but in almost every other regard, this is a comprehensive statement
from an auteur and historic watchmaker. 30 meters water resistant, so don't take it swimming.
Reach out to Tommaso at the1916company.com for purchase and pricing details.
