Drainage Problems, So We're Installing Seamless Gutters On this Commercial Building...

My Brother Donnie
257 followers
148 Video Views·Sep 26, 2025
When it Rains... It Pours!!!
Okay, y'all. The problem we've got here
is this road is higher than the
buildings.
So, when we're dumping water, water's
coming down through here. It's running
right down
right down in these buildings. So, we're
trying to figure out a way to keep the
water from going in these buildings.
over there. We
We didn't do it, but somebody at this
back door here, they put bricks up where
you can uh where it's above the ground.
So, we're trying to figure out something
to do to get this water. I dug this
trench here and you can see that little
trench there into there trying to keep
the water out of there.
But what's happening is um when we get a
big rain, water sheeting off the
building, hitting right here and running
back in. So, we're going to try to put a
gutter up here to uh to stop it and uh
see what we can do with it. Hopefully,
we can get something in there to block
the rain from coming from getting right
there against the building. We can
handle a little bit of rain there
against the building. We just can't
handle the volume of the roof coming off
of here. This is a this three
storefronts. It's about 70 foot long and
about uh maybe uh
somewhere around 55 60 foot long wide.
So, it's a lot of volume of water coming
off the back of that roof and it's just
flooding us out when it hits the ground
here. So, we're gonna and it's rot in
the back of the building and we're gonna
try to clean it all up and uh hopefully
we'll get it fixed up.
But if we do, you guys will be the first
to know
flashing all the way down.
Got it fixed.
So, tomorrow we're going to come in here
and put gutters on it. I'm going to try
to get a down spout over there somewhere
and get it out where we can get away
from that.
That'll probably work. And uh maybe a
down spout over here we can get out and
get away from it hopefully.
Okay, y'all.
Call my guy.
The only reason I call him is because
his machine is made in the USA. Woohoo.
Pretty good machine here, y'all. This uh
this a six or five in. We always run
six. We're having a water problem here
with one of our buildings. So, we're
having him put gutters on it, try to
help the water problem. We're going to
try to push the water out away from the
buildings.
I'll show it to you in a minute. We'll
get around there and uh see what we can
do with it here. But that's the machine.
I'll show you making gutters. I'll show
him making gutters here in a minute.
We're back there measuring it off now.
And uh should be good. That's the 5 in
plate there. 5 in plate and 6 in plate.
So
that's what we're doing.
I think this is the cutter.
This is the cutter. It'll cut here. pick
up and slunk. This is just cut stuff on
top.
So,
got down spouts over here and the elbows
and all that good stuff. He's got boxes
of elbows up there.
So, we should be good.
[Music]
There it comes.
They just cut it.
[Music]
[Music]
See,
he's going to cut a hole in it to make
the down spout mount.
He's working on it now.
This thing's going to run out 50 foot
and that's going to be straight run.
No holes or nothing in it.
Well, it'll look good.
He's going around back with all that
stuff. Start working.
But here's what the gutter is going to
look like.
He's got to cut this piece out.
He cuts it on a 45 there so it go
through the machine correctly and it
bends it all up and then it comes out.
You know, he just cut this off. So, he's
made him a hole or made him a template
there. He's going to cut a hole in that
and then uh we'll uh we'll be able to
put a down spout on the bottom of it.
And then he's going to run out another
100 foot or whatever it is. 50 foot, I
guess. Run out 50 foot. When he gets out
50 foot, that's why I back my truck up.
When he gets out 50 foot, he'll put
another hole.
[Music]
We'll see here in a minute, I believe.
I hope
he's looking for his cutters.
Just like that for the hole.
You stick your down in there.
Put the end cap on there.
Tap it.
pinches it close.
Then you silicone the hell out of it and
you're good to go.
Boom. Boom.
[Music]
Maybe too necess
Yeah, he needs a jack stand.
>> One jack stand.
So, he puts these clips in it ever so
often that he's going to screw it into
the building with.
[Music]
[Music]
>> The jack stand.
>> Jack stand. Jack stand.
Maybe
the salsa to the the legs.
Maybe
Basically, what's going on? The jack
stand's too high. So, it's putting it in
a kink and it's trying to kink it up
there. So, what a he usually stacks it
on uh
cardboard anyway.
Put a box cardboard box and a few other
things there and it'll ride right on top
of that box and then you're good.
There we go. Just keep going out
[Music]
there. That's how fast it's moving. See,
[Music]
[Music]
this one comes back. He's got all his
gutter pieces.
We don't
Here
[Music]
you go.
[Applause]
Heat.
[Applause]
[Music]
Heat.
[Applause]
[Music]
50ft gutter almost touched my truck.
B. Basically, it's going to take them 10
minutes to make a 50ft gutter here.
It's 40 uh
48
48 and 1/2 ft.
[Music]
Same familiar faces.
>> Say hola.
>> Hola.
Hello YouTube.
>> Another familiar face if you've been
around a while.
>> What's up, amigos?
>> So, we get it. We're getting it here.
We're going to get it knocked out.
>> So, that's 50T gutter at one time here.
We're going to carry around there
without buckling it. We hope.
There they go.
50 foot at one time.
>> It's actually 48 and like uh 9 in or
something, but close enough to 50 foot.
Huh?
Woohoo!
We got it this far without tearing it
up.
So, now we got to get it up there.
Basically, we got water running in the
back of this building and I'm trying to
get the water off this roof away from
the building. So, I'm uh I'm putting
this gutter up. I'm going to put two
down spouts. I'm going to put one over
here pushing it out. I'm going to put
one over there running it down that
wall. trying to get it away from that
building and hope that I got enough uh
enough um fall or whatever you want to
call it, enough whatever to get it away
from it. So, we should be should be good
here shortly.
But they're going to stick it up there
and we'll see what it looks like. Then
I'll make sure I get a up here. He comes
with the ladder. I was going to cut you
off and come back when they started
sticking it up, but I think they're
getting ready to put it up there.
So,
Okay.
[Music]
Charging.
Get closer
>> old awnings I made here
15 years ago.
Amen.
Better
skin. Okay.
Just like that, it's installed.
Might have to cut that lamina back.
>> There we go. Okay, y'all. We're going to
put one to the test here. Ain't never
tried them out before.
I bought it the other day.
This goes in your impact driver and it's
a set of shears.
Supposedly it'll cut tin and aluminum or
anything sheet metal wise
quick
like
a foot per
foot per 30 seconds or something. So you
should be able to cut whatever you need
to cut. We got an instance back here
where the roof or the metal tin is
overhanging the gutter. We need to cut
the gutter back. I mean the roof back a
little bit. So, this is what we're going
to use. See if we can knock it out. If
it does its job, it'll be well worth the
money. So, we'll see.
But, we're going to give it to these
guys and have them cut it.
like a $50 tool.
We'll see. They say they're going to do
that in a minute. Basically, they're
trying to get the gutter back that way
against the wall there. So, we'll get it
back against the wall.
I ain't got it screwed up yet. They're
screwing it up.
It looks pretty good. They still got to
screw that side up a little bit.
But like I say, we're trying to get
water away from this building.
We'll see here.
See what they can do. I think it'll be
fine.
Okay.
[Music]
That looks a lot better than what it
did.
Um,
we started yesterday. I didn't get I
don't know if I got any footage. Ronnie
might have some pictures where he can
drop in here.
That was basically uh
the uh fasure was gone. The boxing was
gone. We had to uh redo the boxing and
uh most of the fasure yesterday. So we
got it all done and then I called in the
uh
the gutter guys. Told them to bring the
other trailer today. So they brought it,
knocked it out here.
Basically, we're going to keep it high
like that so the water will jump and go
go out. Got a metal shoot we're going to
put on the end of it. Kind of push it
out there a little farther. Should be
good.
You know, it's always uh it's always
different when you're trying to do some
stuff that
trying to do some weird stuff here. Most
of the time you don't do what we're
trying to do here. We need to get the
water out here on the road pushing that
way. So, it's going to force it to that
side of the road. We need to cut a ditch
in that side of the road to keep all
that water over there. Instead of
letting it run over here, basically,
it's coming over here and coming right
down in here on us. So, we either need
to fill this side up or cut that side
down. And I own
all the way to over there
about where my finger is at there. All
the way through there. I can cut that
road down. I own that road.
It's not really the road. It's an
alleyway and I own it. I own two
about that big tree there. So
that's about the property line. And I
know that that manhole I own to the
middle of that manhole cover
on this particular partial. So there's
another partial down there. I own
another one of these buildings and I own
another quarter acre behind the
building, but this particular building I
only owned to there. So,
[Music]
put the gutter on now or the down spout
on.
He said he bought a set of DeWalts. He's
got a set of DeWalts like this that uh
he gave $100 for.
If this thing will cut like I think it
will like the advertisement shows, it's
going to be good. We'll be good to go.
But uh
if it don't, we're going to be uh we'll
be days cutting that by hand. That's
hard cut.
But uh we'll see here.
They just cut that back some more. Try
to get it up higher.
First time anybody's used them.
[Music]
Go from the ultra lotto and see if it's
>> buo.
[Music]
They are cutting.
It's doing what it's supposed to do. I
think uh we ain't got the right
technique yet.
But yeah, cutting like hell.
[Music]
>> Yep.
about three times faster than me to cut
with sheets.
Only problem he has when it gets to the
double thick laminate
roofing. It don't want to cut to double
thick, but still it's it's at least
three times faster.
We pay all that money for them straps
and they can just cut them out.
What the Okay, y'all. We got the water
coming down.
Getting away from the building here.
There. There.
Coming out. Getting that water way away
from the building. We got it coming out
20 ft off the building there. It's going
to come out in the same spot it has
been. Get that building off.
And uh we got some coming here.
It's going to be good.
Okay, y'all. We let it uh rain here a
few times. You see it there? We did
that. Put that gutter up there. Come
down over there.
It's rained here a few times and uh we
uh see that it's working. So, we figured
we would uh let y'all see this after we
got it fixed. Give us a thumbs up for
filming it. Subscribe to the channel if
you hadn't already. And we'll catch you
on the next one. Thank you.
