Here are the top 10 tools we saw at the 2025 Milwaukee Tool Pipeline.
At number 10, we have the new M18 Brushless Precision Blower with the fastest air speed
for stubborn debris. With a unique form factor, this handheld compact blower is only 7 inches
long and 2 pounds, ergonomically designed for convenient cleanup in various environments.
It is equipped with three distinct power modes and a variable speed trigger,
delivering 570 miles per hour airspeed and 39 CFM.
And it can run for up to 30 minutes on a 5.0 battery pack.
It has an LED light, lock-on trigger, and three interchangeable nozzles,
including a short 6 millimeters nozzle, a long 10 millimeters, and an inflator nozzle.
At number 9, we have the new M18 Fuel-Covered Conductor Cable Stripper with adjustable
bushings. This is the industry's first cordless tool optimized for end-stripping insulation on
aerial. 600 volts secondary and medium voltage cables, offering an unmatched cable stripping
experience. It has six adjustable bushings to accommodate cable diameters from 0.5 to 2.1 inches
and an adjustable depth gauge up to 6 inches that is fully removable for extended strip lengths.
At number 8, we have the new M18 Fuel 3-in-1 Backpack Vacuum Optimized for extended floor
and overhead cleaning, among other everyday jobsite cleanup tasks. This product comes
equipped with an integrated cyclone separator to maintain productivity and reduce downtime spent
cleaning filters. The motor delivers 70 CFM and 55 inches of suction. The tethered remote provides
full control of power button and modes, and the max power mode delivers over 20 minutes of continuous
cleaning on an M18 Forge 8.0 battery. At number 7, we have the new M12 Fuel Quarter-Inch Subcompact
Impact Wrench with Friction Ring. Measuring 4.4 inches in length and 2 inches in width,
this tool fits into the tightest spots while delivering up to 100 foot-pounds of nut-busting
torque. When paired with an M12 high output 2.5-amp battery, lastly, it has a variable
speed trigger with 4-mode drive control, and the auto shut-off mode prevents over-tightening
and increases productivity by applying no more than 7 foot-pounds of torque.
At number 6, we have the new M18 Top-Off Charger and Power Supply, offering a portable solution
for charging M18 batteries. It features advanced USB-C PD technology for faster headlamps,
phones, tablets, and laptop charging. It includes a 100-watt USB-C cord and a 65-watt wall charger.
With dual USB-C ports for small electronics and larger devices.
At number 5, we have the Pack-Out Rack Kit. With the ability to fully customize the drawer layout,
all Pack-Out components connect to the drawers and can fit inside the rack kit.
This solution can stack and expand across a wall to accommodate the needs of any fleet,
job site, or shop. At number 4, we have the M12 Fuel Quarter-Inch Right-Angle Die Grinder.
It delivers 50% more power than pneumatic competition and provides greater mobility
and accessibility to help fit in tight places without giving up on performance.
It features an improved ergonomic handle with 4-mode speed control and a responsive variable
speed trigger. New shadowless lighting and a single-wrench spindle lock allow for improved
ease of use. At number 3, we have the new M18 Fuel 21-Inch Auger-Propelled Dual-Battery
Single-Stage Snowblower, delivering instant start-ups, auger propulsion, and a chute that
up to 40% wider for efficient snow processing. It generates 7.5 horsepower's peak power,
enabling you to utilize the full width of the snowblower to clear deep and heavy snow without
stalling. When using two M18 Forged 12.0 batteries, it can clear up to 11 car spaces,
or 500 feet of 3.5-foot-wide sidewalk and 6 inches of snow.
At number 2, we have the new M18 Fuel Branch Conduit Bender with AutoZero.
This is the industry's first portable cordless conduit bender, explicitly designed for commercial
and industrial electricians' branch. Installations up to 1-inch EMT and 3.25-inch RMC, enabling
bends to be done at the point of installation, allowing electricians to work anywhere.
Only compatible with Milwaukee EMT RMC conduit bending shoes.
And at number 1, we have the new M18 Fuel Surge Quarter-Inch Hex-Hydraulic Driver.
This new driver is 0.7 inches shorter and 0.3 pounds lighter,
but delivers up to three times faster driving speeds than the previous generation,
and 1,000 inches per pound of torque for added capability. It has three-mode drive control for
greater control over speed and power. Try LED lighting for maximum workspace visibility,
and offers single-handed bit insertion.