Flushing Skoolie Water Lines Of Antifreeze - Designing & Cutting Zep II Metal Badges - S1E7

Enjoy RV and Van trips
18 followers
Sep 26, 2025
Billy and I ( Mostly Billy ) built the roof rack for Zep one. He donated his time and metal to help me get Zep II up to snuff.
Well, good morning everybody. I am outside of Billy's shop right now.
We're gonna do some custom metal work. Last video you saw Daniel took off back to
Indiana. I'm gonna get some work done here and
then head out to Quartzsite to get the lithium batteries installed in the rig.
Super excited about that. Excited to have power in here.
Cold food storage and all that good stuff. About to head into
Billy's shop and show you that. Right here? Okay. So a little bit later in
the day obviously. Show you what I have going on over here.
So as you can see I've been a little busy out here.
This is some of the RV antifreeze on the ground. I've been
cleaning out the system. Got a hose running into the RV because I
was smart enough to leave my keys for this back in Indiana.
But the good thing is being that I have 200 gallons of fresh water I can
fill up here once I get all this cleaned out and
I can fill up here and then the 200 gallons will last me
a very long time. The battery that I brought from Indiana has been dying so I
just opened up one of these battleboard batteries hooked up to the 12 volt
and that's how I've been running the lights
as well as the water pump. So I've been in there filming with Billy. I'm
basically helping him get some of his social
set up. Getting some content for his social media. Billy actually helped me
build the roof rack on the first Zeppelin and I was
actually his first paid job doing that that roof rack and now he has
his own shop. We're about to go in and show you that.
It's really cool to see how far Billy's come. You know he's put in the the effort
and the time. Like you know they say it takes 10,000 hours to become a master and
that kid has put his time in. Like I said we're going to go in there we're
actually making plates for Zepp 2. I don't know where I'm going
to put them. We're actually thinking about doing a
giveaway. So I'll make the plates for this and
then we'll make an extra one and give away to somebody on the channel
somebody on on social. But being that we're in Phoenix I'm
actually giving a little bit of time once the traffic dies down. So I'll be
here for another couple hours. Just ordered some Chipotle. Love Chipotle.
Kind of splurged. Bought some food for the guys here as well.
But once I get ready to head out I'll fill up those tanks and then I'll head
probably halfway to Quartzsite tonight. But check out this shop. So when he first
started he was working out of his garage. So when he
did the original roof rack it was out of his garage.
Any tool you would possibly need. This is where the Zepp 2 plates are
going to be made. This is a plasma cutter. Massive massive
shop. Billy has his dad working with him.
Massive work table. Anything you would need. So the rule OG's
of the channel will recognize you.
So right now we're actually getting ready to start.
It's essentially what we're going to do is
put the design on the computer. Do you have the original Zepp design from back
in the day? I don't. It's not on this computer. It's on
it's on an old computer. That was a long time ago. That was a long time ago. What
was that? Six years ago? Yeah it's been a long time.
I was just saying you mentioned your first paid job was the roof rack.
It was. That was the very first time I ever got ever got paid for a job.
And now look at you. It's kind of long. It's a little bit
a little bit different than it used to be. He's growing slightly.
Yeah I was telling him that he needs to start converting school buses. Raising
the roofs. He's thinking about it. He's got a bug in my ear. We'll see what
happens. So with with like what what is the
process of putting this together? Basically what
we'll do is we'll kind of sketch something up. Get an
idea of what you want. The size of what you want.
And then we'll do a little internet surfing and find the
the Led Zeppelin logo again. Convert that into
vector style file that we can cut on the CNC. And then we'll just kind of piece
and put everything together so it looks
nice. And then when you like it we'll chop it up.
So Billy just had an idea. I was just planning on doing like a
a rectangle type plate that you had the idea of actually including mountains on
it because I'm doing a mountain theme on the side
eventually. It would be pretty cool if we did the badge so it had a cool kind of
eevee mountain looking thing.
So this this pup. What's the story behind
her transformation into your shop dog? Yeah she actually was just a little
stray out back in her yard back there. And she wouldn't come anywhere near us
but it was starting to get cold out so we started feeding her and
giving her food and kind of make sure she was staying alive. And then
eventually she had a litter of puppies out there.
So and then she was in here every day. And finally we figured out that she had
puppies. It took us a little bit because we know she's a little skinnier and
she kept coming inside because she was eating like crazy. But after that we went
out and got her pups and now we got them.
We'll see if she lets you over here. Yeah I know. She's gonna snip at you.
She's protective of those pups. Yeah she is. So we got these little guys living
under the desk here. There's four of them.
She's like not quite sure what they are yet because they're real
they're really little. Yeah she's pretty protective. It's okay that's as far as
they'll go girl. Yeah. Oh you even got a little house for her.
Yeah we made it. We made this for her out there first.
Because we're afraid of them. We have a lot of them. And we're afraid of the cats
like eating the puppies unfortunately. I mean I know it's sad to say but
they all made it. Yeah those cats are crazy man. They really are.
They're crazy out there. So when when I first got here she was not having me.
And then I had some cheese wrapped treats. No it's it's salami wrapped
cheese. Fed her a little bit of that and we
became friends. But now I'm there for her puppies.
Hey did she get you? No. She's like the sweetest dog.
As long as. Until you go by her puppies. So do I need to go back there to do the...
You do need to go back here. She'll just sit and watch you the whole time.
So you can hang out on one of these cool chairs we have here. That's awesome. I need
to get some of those for the bus. Is that one of your current
projects? This is. This is one that we're working on now for the Scottsdale train
station. Let me zoom out here. It's a bunch of
these are all doors basically. These are big glass panels that are going on.
And these two outside will be doors. So they'll swing out.
And then I'm doing a big train station thing behind it. Nice. Pretty cool. Yeah.
That's for City of Scottsdale. So the original one we had the
the Icarus with essentially the the Led Zeppelin
lettering. That's right. Yeah. And it had the Icarus was above it right?
Yeah. This guy right? Yeah. So it was beside it. So Icarus.
Okay. Icarus was beside the lettering. Yeah. And it had that type of font.
And I remember we couldn't. Maybe we could just even google it. Like what
what is Led Zeppelin font? You know what I mean? The actual font. Well I can just trace
it out. So I should be able to. I should be able
to put it in a program I have here. And hopefully I can get a trace on it.
And then it might just trace it all out for us. That looks really good.
Yeah. Let's give this one a shot here and see if we can
save this image. Just the desktop. So you save it up here and then it can be
transferred to the computer in the back? It can. Yep. So I just do it on a flash
drive basically. I just do all my design work and everything up here.
I'll either do it with like AutoCAD or I'll do things in SketchUp.
Or this is the the program here is called InRoute.
And this one you can do design work in. And this one actually
writes all the code for the CNC machine to
do it done basically. Gotcha. So we're going to take this whole thing and scale
it all down to fit inside. Smaller than inside this box
because this is our actual material piece. And this is 48 inches by 48
inches is what we have it scaled at. So this obviously is like 30 feet across
right now. That'd be the size of the bus.
Yeah this would literally be the whole bus. Which would be cool if we could do that.
I don't think we have that kind of time at night. No sir.
So here's the mountain range we like. We got to simplify it. So
we're going to simplify it down to something kind of like this.
Well a little bit we have to add to it but this is kind of what it's going to
be. And we'll say the lead zeppelin inside here.
Should be pretty cool. So that's just this eye converted into
the tube. Absolutely that looks great. And I just followed these little angles the
same as the angles that are on this little dash guy here. That looks really
good. Yeah. So we got the icarus just like
Zeppelin 1.
Can't help it. So we have the Zeppelin 2 plate up and ready.
Ready for the chopper. So we're going back to the machine.
We're going to chop this up. This is the machine.
The machine. This is an absolute beast. So what is that
green in there? I put green food coloring in there so that
it just stays clear otherwise. I don't want anybody trying to drink the water
or anything. Not that they really would but
it looks like it's toxic now. That does look toxic. Yeah.
Yeah here's our plasma torch. I put this little silicone
cap on the end here because normally you have to when you're cutting with plasma
it's really intense bright light. It's basically it's the same
power as the sun basically. The sun is plasma. So we're covering cutting with
the power of the sun which is pretty cool. But this guy you can put down and I can
we can all stand here without glasses on and watch it.
Awesome. So because it covers the light portion. Otherwise you have to wear like
a welding mask or crazy. What gauge you going with there?
I'm gonna go with 11 gauge. Good stuff. That's some heavy stuff. Oh
yeah. It's cold rolled steel here.
It works on x y and z axis. As you can see like the corner there.
X left to right. Y is front back. So I basically I bring that torch
wherever I want to this corner and I make this corner home base basically.
So then it builds the program what we've done in the program
off of that. Gotcha. So you essentially just set the corner.
Like you just do it manually. Yep I'm on the corner here. So now
yeah I got the corner where we need to be.
And now we have to set it. Now we'll view it.
So it's telling me this little point right here is right where I have that
torch and it's going to go right to here first
and cut. This is exactly the order it's going to cut. As you can see each line
it goes where it needs to go. It just tells you on every single it's going to
cut this and this and this and this. So it all goes all the way through. Is
that the same programs you used before? No not anywhere even close. The old one
was a it's like a hobby style machine and this
is more of a semi-production machine. Gotcha. So it's the next it's a
the high end of the next step up. They still have another
two more step passes you can go to really super nice staples but I don't
need anything that crazy. So this one works great. That's like fully
industrial. Yeah I mean you're a big big shop doing
high production work and two shifts three shifts. Yeah
exactly I'm cutting onesie twosie custom stuff here so
over these beams so give it a little bit of this
gantry up. Yeah give it kind of a whack on top.
Good way. Get a little bit of cleanup on it.
It all looks real nice. That's sweet bud.
Yeah let's go. Take it and grind her down real quick.
Get cleaned up. There it is. Not too shabby man. So there's slack in the back of the
cut so you can see the front part here. Cut. Back. Slack. Take all that off.
That is very reminiscent of the first step. Yeah.
Cool. Shiny. Yeah real shiny.
