Mel shows how to replace the shower head in an RV, and how to replace the RV shower faucet, while she upgrades our RV shower head and faucet to the Oxygenics Fury RV shower head and Dura Faucet designer series faucet. It’s easier than you think!
If you would like to know how to replace the RV shower head or faucet in your camper you will need the following tools: Exacto knife, pliers, silicone caulk, screw drivers, towel, rags, all-purpose cleaner, and a new RV shower head and RV shower faucet.
Follow along in this tutorial that will show you how to replace your RV shower head and faucet. You can navigate back and forth through the video easily using the chapters below. ⬇️
0:00 Chapters 0:20 Disclaimer & tools you need 1:29 Removing the old shower head & faucet 3:54 Installing the new faucet & shower head 7:18 Pressure testing & final touches 9:44 Bloopers
So today we're replacing a shower faucet in our RV and this was to be just an upgrade but the old
one actually broke so we kind of have to replace it either way. Kind of perfect timing.
First off I'm going to start by saying I'm not a plumber.
Kind of look like one though. I know. I'm not a plumber but I watched a video.
The person who made the video who was RV bloggers I figured hey if he can do it and he's not a
plumber then I can do it and I'm not a plumber. So first steps first I've turned off the water
and I have opened the faucet for a few seconds just to relieve any water pressure and then
secondly I've also put down a towel in the shower stall here just to cover up any drain
so that if I were to drop something it's not going to go down the drain. Next I'll show you
the tools I've got ready. So I've got an exacto knife to cut through any of the sealants,
phillips screwdrivers to be able to remove the mountings and just put them back on,
a sliding hinge, pliers, some silicone marine grade caulking. I've also brought in a rag just
in case I need to do any cleaning and of course a drill in case I need to drill in for the new
mount but we'll see how it goes. I'm going to start by removing the old shower hose and now
I'm going to just gently cut into the silicone sealing just to make it easier to remove. Now
I'm going to cut this. The shower head is one thing and you can replace just that but I wanted
some nicer looking faucets. I found these are just a little bit outdated. Okay this should peel off
and when you're removing this you don't want to pull too hard because the water lines are behind
it and so you don't want to rip those out. So I'm going to disconnect the water lines
it's just on there so tight. We realized there's a little bit of slack in the lines in the water
lines that we have so we were able to pull it up a little bit which really gave us a lot more
space to work with here. Oh still a tiny bit of pressure in that line. I heard it starting to
escape just as I was loosening it so instead of loosening it further I just let that pressure
release very quietly very slowly because I don't want water in behind the wall here. Almost done.
Look at that. There we go. Okay so this piece here is your mounting bracket. This
with the handles is the faucet that's what we're changing. So on the back side of this we've got the
washers so we're going to loosen those. Our mounting bracket looks really clean. What I
will do though is remove any of this extra caulking and that's the old one. So let me just
clean up this caulking and then I'll show you the new one. Now let's put me to work. So now we've got
this all cleaned up. That was probably the longest part of doing all of this. For the house we do have
a caulk dissolving gel but we weren't really confident to put it on plastic because I think
it can damage plastic so if you happen to know of a product that can be used to loosen the bonds
of caulk on plastic let us know in the comments. We're gonna put in the new faucet and so we chose
the Dura faucet designer series. This is it. I looked at a lot of different faucets. If it's
well known and there's lots of ratings and there's lots of positive reviews it's got to be pretty
decent. So it comes in a few pieces. You've got the actual faucet. You've got your gasket. Before
you screw it on or before you mount it to the wall you can screw it on. You got to make sure
it's oriented correctly. So your hot tap will be to the right, your cold to the left. Hot is on the
left and cold is on the right and the little spout that your hose is going to attach to is facing up
and you can screw back these and you want to go hand tight. The directions call for plumber's tape.
Some sources I've read said not to use plumber's tape on plastic. What do you think? I say when in
doubt don't because it didn't have it before did it? So since the original one didn't have
plumber's tape on it I'm not going to put plumber's tape on this. So repositioning my water lines and
cold to cold. So blue is cold. Instructions say to go hand tight and then a quarter of a turn
with a wrench. Pure shower genius fury RV shower head model and the reason we chose this
is because it is rated to have some of the best performance of shower heads. So in it it comes
with some screws for mounting the mounting bracket, the mounting bracket, the hose, and
the shower head. I feel like Vanna White. And now we have to switch out the mount so I've got to
unscrew this. So this is going to be the new one. Now these mounts actually have two options for
putting it on. You could do it with an adhesive mount or with screws and we're choosing to go
with the screws because we've used some other adhesive products in the RV and they just kind
of have fallen. You're on too many bumpy roads. Yeah I'm gonna line it up like that and I think
go with that but if it is there will the shower head still fit? Well it would have to be like
that. So let's do the bottom one. That way okay and then it can tilt up a little bit. Yeah it's
a good thing we checked that. I feel like the hole is filled now. Plug me in baby. Well that didn't
take much. It should have been a maybe slightly larger drill bit. And then this can go on. And then to hide this ugly screw
we have a beautiful little button sticker. Isn't that perfect? Now I've got to connect the hose here
and now for the shower head. Slide that into place. What do you think honey? Looking good.
So let's uh yeah let's put some water in the tank and we'll pressure test it make sure there's no
leaking. We'll screw in the mounting bracket and do some caulking and then we'll be done.
Might as well just fill the entire tank since we're gonna go camping again soon.
How's it looking? Going good. Now we're gonna walk away and completely forget about this.
One time I was filling the water tank and I walked away and forgot about it
and then it started spilling out all into here and there's like a little outlet but it was spilling
so much that it actually spilled into the garage section and we had a flood. So now we set a little
timer alarm and we don't go very far from the filling. All right so we've put water in the
tank now and now we've got to turn on the water pump and just watch for any leaking. But it won't
actually be pressurized to there until you open it up so we do actually have to turn it on. All
right ready? Oh stop stop. This is very very bad. Like it's like a over pressure drip or something.
Okay so we figured it out. There was no problem. These straw faucets have a little hole I guess
like a little extra over pressure valve. When you first turn it on for the first time it does leak a
little bit and then once things come to pressure it's all okay. So it did stop within seconds of
us turning it on. We just needed to be patient. So yeah now we're just gonna let this run for a few
seconds and like holy cow look at that water pressure. And we have no leaking in behind this
so I'm pretty confident that we can just move forward. All right so there we have it. So thank
you to RV blogger for your first video on how to do this because that really really helped us.
Stay tuned for our video on the review of this showerhead. If you really like this video or if
you found it helpful in any way please consider giving it a like, hit the subscribe button if
you're new to our channel and and the notification bell so you get to see other videos that we make.
And in the meantime, keep on living the life you imagined.
Silicone um what is this called again? Coffee? Yes. Oh great the exacto knife broke.
It goes onto your mounting bracket. Oh shoot I have to remember which way this goes.
Goes that way or that way? That way. Yeah I think it was that way.
All right so wait what was that again?
We have a beautiful little button sticker that I just dropped and lost.