Sir Winston Churchill was an extraordinary man who lived a life for the ages. He was a man for whom compromise and anything but one's best effort was unacceptable. After leaving office Churchill began painting and developed into an accomplished artist. And though this small painting did not require a herculean conservation effort there were some issues that could only be qualified as adequate.
In this video, aside from conserving the painting and addressing mistakes during the last conservation, efforts are made to salvage the hardboard backing to which the painting was mounted but in a way that is in accord with modern archival practices. Though this work modest it is critical and the effects profound and certainly more than merely adequate. Chapters
View all
Support for this video comes from Skillshare, which offers thousands of inspiring classes for
creative and curious people on topics including illustration, design, photography, video,
freelancing, and more. The subject painting for this video is small. It's a landscape,
and it's charming, if a bit quaint. Now, it was executed by an artist who was anything but small
and quaint. You see, the artist in question was Sir Winston Churchill, a man known for his larger
than life footprint. Now, this painting was executed in oil on a small piece of canvas,
and at some point later on in the painting's life, it was mounted or lined to a piece of hardboard,
something like masonite. Now, this hardboard is a general building product and not something that
is ideal for paintings because it is full of acid, full of unknown materials. It decomposes
and can take the painting with it. Now, when this painting was last worked on and it was mounted to
this piece of hardboard, well, the work wasn't great, and we can see all sorts of waves and
ripples that have been embedded into the canvas. And these waves and ripples are distracting because
they force us to see the surface of the painting and not the image. They take away the sense of
space and depth that Churchill was trying to create and force us to see the texture of these
ripples. And we're going to address that. And also, we're going to clean the painting because
it's quite dirty and remove the old varnish. Generally, we're going to take the opportunity
while we have the painting in the studio to correct all of the things that we could just call
adequate. Because, well, what is adequacy? Now, Churchill took up painting after he left office
as a way to relieve stress and as a fun hobby. And I can totally see why he might want something
that was stress-relieving given that he had just led a country through a world war.
Churchill was self-taught. He didn't take any lessons and he had no formal instruction. But,
you know, I bet if he were around today, he wouldn't go it alone. He'd probably turn to
Skillshare. Skillshare is the online home to millions of people just like you. Curious,
creative, who are looking to explore that creativity, indulge their passions,
or sometimes just learn something new. And if you're feeling a bit stressed out,
worn thin, and overwhelmed lately, I mean, who isn't? I might suggest acrylic painting,
How to Paint an Abstract Landscape with Lorianne Gonzalez. She'll walk you through materials,
techniques, and a way of seeing the space around you that will have you lost in the world and not
thinking of all the chaos that surrounds you. I mean, there's a reason why so many world leaders
pick up painting when they leave office. It's incredibly mesmerizing and relaxing and even a
bit zen. The first 1,000 of my subscribers to click the link in the description will get a free
trial of premium membership so you can explore your creativity. So we're all chilled, we're all
relaxed, and we're all going outside to paint landscapes, right? Really, I mean, you should try
it. It's incredibly fun. Back to the painting at hand. And the first thing I need to do is to face
the painting with washi kozo. That's Japanese mulberry paper. And I'm doing that because I need
to remove this painting from this old masonite. And I don't want to take the chance that the
painting is going to get damaged, scratched, or any of the paint is going to become detached
when I'm handling it. So I'll take a piece of paper, and I'll use a ruler to tear it. I could
certainly use a knife, but this is an old trick from printmaking days where I can just use the
ruler to peel the paper back and get a nice crisp edge. And once I've got this paper trimmed to a
size that's appropriate for the painting, I don't need to use too much here. I can start to apply
the fish gelatin. And this, of course, has been warmed up on the stove because it solidifies when
it's cold. And, of course, keeping it in the refrigerator makes it into a jelly of sorts,
and it doesn't flow, and it can't be applied when it's cold and stiff. So by heating it up,
it allows it to flow, and it turns it into a liquid. Now, this is a really small painting,
so I can just use a little brush to apply it. If the painting were larger, I might use a roller,
or I might even spray it. But generally, a brush is a fine way to apply this adhesive.
Now, fish gelatin is not as strong as something like rabbit skin glue or hide glue. Fish gelatin
breaks down pretty easily with exposure to moisture or water, so it's going to come off
relatively easily when I need it to. If I was using something like hide glue,
it would take a lot more effort, and it would require a labor that probably wasn't appropriate
for a painting. Now, once the paper is embedded into the first layer of adhesive, I'll go over
it again with a little bit more just to make sure that I've got good purchase and contact,
and that all those air bubbles are removed. Because of course, we can't expect this paper
to do its job if it's not actually bonded to the surface of the painting. So getting rid of as many
of these air bubbles as possible is really critical to making sure that this paper has
good purchase on the surface of the painting. And again, because it's a small painting,
I can use the brush and take my time. I don't have to worry about this adhesive drying too quickly.
On larger paintings, that can be an issue, and that's generally why it's always advised to work
in smaller sections so that you're not chasing drying glue or kind of getting out in front of
your skis and getting overwhelmed. And then once this is all covered, I can let it dry for a day,
and then I can move on to the next procedure. Now, I mentioned that what we need to do in order to
relieve the issue of the waves and ripples is to take this painting off of this hardboard.
Now, in the past, you've seen me use various tools and approaches to remove the board from
the painting, and that's totally okay when the board is going to be discarded or isn't necessary
to save. But in this case, because of that label on the back, and because the client didn't want
this board damaged or destroyed, I can't just shave the board down using routers or planes or
scalpels. I have to remove the painting from the board. And the first thing I'm going to do is
take a scalpel and just start to work an edge to see what kind of adhesion I have. A little
exploration. Now, unfortunately, this is not a heat-activated glue, and it's not a water-activated
glue. It is a contact cement, just like the contact cement that you would buy at the hardware
store for craft projects, which is totally fine, except in the field of art. Contact cement is not
an appropriate adhesive to use on a painting. And unfortunately, there's no easy way of removing it.
I have to slowly peel back this canvas, just a little bit at a time, and use a highly evaporative
solvent on a brush to soften up that adhesive just enough that I can peel it back. And then,
by the time I go and recharge the brush with solvent, the solvent that I had just applied
has fully evaporated. And that's really important, because I don't want this solvent to be sitting
underneath this canvas for a long time. And so by using one that has a high evaporation rate,
I can ensure that there's minimal contact between the solvent and the original painting.
Now, it also needs to last just long enough to soften up that glue, and so that's where choosing
the right solvent is really necessary. And as you can see, there's nothing fast or quick about this.
Now, it's not terribly difficult. Apply a little solvent, peel back the canvas,
apply a little solvent, peel back the canvas, lather, rinse, repeat, so on and so forth.
But I have to be really careful, because I don't know how brittle this canvas is, and I don't yet
know why it was laid down onto this hardboard. There could be some major structural flaws in
this canvas, or it could be compromised in a way that I'm not yet aware of. So by moving really
slowly, I can ensure that if I do find something along the way that it's concerning, I'll catch it
in time before it becomes a problem for this removal process. Now, one thing about contact
cement is even though when I soften it, it releases, it becomes sticky again once that solvent
evaporates. And so if I don't keep pulling up this canvas, when it falls back down, it will re-bond
to that hardboard, which is kind of a bummer, because it means that I really can't put this
aside and move on to something else if I get sick of it. This is one of those projects where I need
to work through it in one fell swoop. Now, luckily for me, it's small, so it's not going to take a
tremendous amount of time. I mean, just imagine if it was the size of the table. I've been there,
I've done that, and that is a long day. Now, even though this is small, it does take a lot of time,
and it's going to take probably about an hour and a half, an hour and 45 minutes to remove this
canvas from this board. And again, part of that is because I don't want to destroy the board,
but also that's just the nature of working with a contact cement. And that's one reason among many
that conservators absolutely hate contact cement. Fundamentally, laying a canvas down on a rigid
surface is not problematic. It is not verboten, and it's something that gets done quite a bit. In
or sometimes the client's budget just won't allow it. Or sometimes the board is the right
substrate for a painting. But choosing the right adhesive and choosing the right method
of executing that treatment, that, well, that's where the devil is in the details.
Because the wrong adhesive, the wrong approach, and the wrong materials can result in disastrous
results. Now, luckily, I have a little bit of experience doing this, so I already know what
I'm going to do, and we'll get to that later on. But I still have to work on getting this canvas
off. Now, thus far, I haven't found anything that would lead me to believe that this lining or
mounting to this hardboard was necessary. There are no major holes, there are no major tears,
and the canvas itself looks really, really healthy. It's not deteriorated, it's not thread
bare, it's not falling apart. So this essentially appears to be a case of unnecessary work for no
real good reason. Now, it's probable that this canvas was never mounted or stretched to anything.
That Churchill painted it on a small piece of canvas without support, and at some point,
the conservator or the dealer or somebody decided to mount it because it was impossible to frame
without mounting. That's not necessarily true, but that's what I think happened.
So now with the canvas fully removed, I can go ahead and start removing the adhesive residue
from both the board and the canvas. And that's super important because A, the contact cement
is disgusting, and B, it will interfere with the next procedure. Now, when removing the contact
cement from this hardboard, I really don't need to be all that delicate. The goal is to get all of
this adhesive off, and frankly, as quickly as possible, because I don't want to spend a lot
of time doing this. So I can take some solvent and a cotton ball, and I can start to saturate
the adhesive with this solvent. And once the adhesive absorbs that solvent and swells,
it becomes pliable, and I can start to remove it. And you can see that with enough friction,
it starts to gum up. And as it gums up, when I roll those little balls around, it helps pick up
more of the adhesive residue, kind of like rubber cement is used to lift up rubber cement.
And so once I've gotten this all cleaned, I can go ahead to start removing the adhesive from the
Now, luckily, there's not a ton of adhesive on the back of the canvas, but I still need to get rid
of it. And so again, I'll take a cotton ball with a little bit of solvent, and I'll apply that
solvent to a small section and start to lift off that adhesive. Now, because there's very little
adhesive on the canvas, it comes off pretty easily. But again, I'm going to try to roll any of the
residue off to limit the solvent exposure. And I can take a new piece of cotton and go over it,
and wherever the cotton sticks, I'll know that there's still a little bit of adhesive that needs
to be removed. Luckily, not much, but you can see just at the bottom there, there's a section where
I didn't hit with the solvent. So I'm going to take it, hit it, remove the adhesive, clean off
residue, and then move on to another part of the canvas. Now, there were some sections where the
hardboard actually stuck to the canvas and peeled off, and so I can remove those with a sharp scalpel.
And I'm just going and slicing those little areas off, and then I can come back later and remove any
adhesive residue. I want to take care not to slice the canvas, but just to separate that hardboard
residue from the canvas. It's not terribly difficult, but if I don't remove this, it'll leave a bump
that will manifest on the front of the painting, and, well, that wouldn't be adequate work at all.
Now, with all of the adhesive residue removed, I'm going to go over to the hot table to do a
treatment to flatten and relax this canvas, effectively to get rid of all of those little
ripples and waves. Now, I'm sandwiching it in between two sheets of nylon release film and
placing it on a cotton blotter. The cotton blotter will hold the moisture and absorb any
adhesive residue that may want to drift, and the nylon release films make sure that the painting
doesn't stick to that blotter or to the mylar PET film that I'm going to apply on the surface to
create the envelope for the air to be drawn out. Now, it's essential to have an airtight pocket here
because I need to have even, consistent pressure, and if this pocket has any leaks, well, the vacuum
pump will suck air out, but it won't apply enough pressure. So, I'm taping it down to make sure that
it's flat and even, and then I'm going to go with some more tape and go around the entire perimeter,
making sure I have an airtight seal. Now, it's certainly possible to use sandbag weights on the
to create a seal, but I want to make sure that I have no air leaks whatsoever. There are cases
where you may want to have air leaks, though I can't see how that would be really beneficial
because if you wanted less pressure, you could just adjust that at the vacuum pump.
In any event, the heat goes on. I'll adjust it to about 110 degrees Fahrenheit,
and then I'll turn the vacuum pump on, adjust the pressure,
and draw out all of that air from that envelope. I'm going to work any ripples out of the envelope
just to make sure that it's nice and flat and smooth because, of course, we're trying to get
rid of ripples, not keep them. Now, once the painting has reached temperature, I'll turn the
heat off and allow the painting to cool. Once the painting is cooled, I can take it out of this
envelope, and I'll try to save as much of this PET film as I can because it's wasteful to not
save it, and I can reuse it, so there's no reason not to. I'm going to peel back these pieces of
nylon release, and then I'm going to take the painting over to my other table and place it
under weights. This is necessary because there is still ambient moisture left in the canvas,
and if I don't do this, the canvas is going to distort, and again, we're going to get ripples.
Once the painting has relaxed for several days and has acclimatized, I can begin the process of
applying the adhesive that I'm going to use to mount this painting. Now, generally, you've seen
me use a roller for this, but in this case, the roller is bigger than the painting itself,
and so it is easier and safer to just use a brush. If I were to use the roller, there's a chance that
roller would pick up the painting and distort it as the adhesive was being applied. So again,
sometimes you have to break your own rules to suit what is required by the painting.
So I'm going to apply this with a brush and try to get a nice even coat on the entire back of the
canvas. Now, this adhesive is heat and solvent activated, so it's warm, and I have to let it
cool before I can move on to the next step. Now, because I need something rigid to mount this
canvas to, I'm going to use a piece of museum board, which is a cotton rag board that's
compressed and dyed black and is acid-free. But in order to use this, I need to first apply the
same adhesive film to this board, and there's nothing terribly complicated about this. I'm
roughly about the size of the painting, a little bit larger, and I'm going to peel it off of the
backing, and then I'm going to apply it to this board using an iron. Nothing complicated.
But this is absolutely necessary, because without this layer of film attached to this board,
the adhesive that I applied to the canvas would just be completely absorbed by this board
during the mounting process, and it wouldn't provide a strong enough bond.
Now, I'm using that steel weight where I'm following the iron, because whenever you apply
heat to something, any residual moisture will turn to steam, and it can distort whatever it is
you're heating up. Now, I'm going to flip this board over, and I'm going to apply adhesive film
to the back of it. And you may be thinking, why? I thought you were just mounting this canvas to
this board and calling it a day. Well, I am, but I'm actually using this board as an interleaf
between the canvas and the old hardboard. You see, this will be the meat in the sandwich,
I suppose. And because it's acid-free, archival, and stable, it's a perfectly fine surface to mount
a painting to, and will act as a barrier to make sure that none of that acid or formaldehyde or
whatever is in that hardboard ever reaches the painting or leaches to the painting.
So we can keep the original hardboard with the painting, keep the appearance of it,
yet we can eliminate all of the downsides of using an imperfect material. And at the end of the day,
the painting will be more stable and look better, and nobody will be the wiser.
Now again, I need to apply a piece of this adhesive film to the hardboard. I could certainly
try to paint it onto the hardboard, but I don't need that much. And once I've applied this thin
film layer, it will be plenty to provide a strong bond to that 8-ply museum board that I'm using as
an interleaf. So again, just using the iron and making sure that I've got good contact and good
purchase. I'm not using the steel there because that hardboard is not going to deform like the
8-ply will. And so now I can start to assemble the sandwich. First comes the hardboard,
then comes the 8-ply, and then will come the painting. And luckily for me, this painting
and this hardboard are square on two sides. The corner closest to the camera, the bottom corner,
is square, so I can use that as a reference point. And back to the hot table. It's funny,
because when I go back and I look at these videos, I realize just how much I use this hot table,
and just how important it is for any modern conservator to have one.
It's kind of like having a range in a kitchen or a table saw in a woodshop. Yes, you can accomplish
the same treatments and get the same results without it, but they're not going to be as precise
and the results may not be as predictable. I mean, imagine trying to bake a cake over a campfire.
It'll still be tasty, oh no doubt, but it may not look as good. So the hot table is a really
critical piece of kit for any conservator. Anyhow, I just thought I'd mention that because
I seem to be spending a lot of time in front of it. So again, I'm going to be making a sandwich
the same way that I did before, using a piece of PET film and taping it down, and then I'm going
to turn the heat on the table and get to mounting this sandwich altogether. Now this requires more
heat than the previous treatment, up to 150 degrees or so, so it's going to take a little
bit longer to heat up, and then it needs to soak in that heat for just a little bit, maybe about 10
or 15 minutes, and then I can turn the heat off and allow it to cool slowly. And allowing it to
cool slowly is actually really critical. If I just turn the heat off the table and cool it quickly,
everything is going to start to distort and deform, so I'm actively cooling it.
I'm making sure that it cools at a deliberate rate, so it's not as if the heat gets completely
turned off and it just cools based on ambient temperature and heat loss. The table will slowly
reduce the heat so that there's no sudden change.
Of course, even adequate pressure and making sure that we have no air bubbles
and no leaks is critical to using a hot table. Now I'm using a piece of balsa wood here to go
over the face of the painting, just to make sure all of the edges are really bonded down.
And balsa wood is really soft, so it's going to deform if it comes to any impasto on the painting.
And now, after a few hours of heating and cooling, I can remove the painting from the envelope,
and it will be bonded to the 8-ply museum board, which in turn will be bonded to the hardboard.
It will not have distorted or deformed, it will be pancake flat, and it will be stable.
But of course, there's too much board, and there's all this facing. So I'm going to remove
this facing by applying just a bit of warm water to the paper and allowing that adhesive
that's underneath and on top of the paper to swell and soften. And once it swells and softens,
I can remove it, and all that will be left is a little bit of glue residue. Sometimes removing
this washi kozo is easy and it comes off in big sections, and sometimes it doesn't. And in this
case, because the painting has been on the hot table twice, that adhesive bond has been activated
and reactivated under pressure. So this washi kozo is really well bonded to the surface of the
painting. So it's going to take a little bit more elbow grease to get it off. Luckily, I don't have
to use any hard tools. I can just allow the water to do its job and break down that fish gelatin
adhesive. Then I can take a little palette knife and start to work the paper off of the surface.
Now, I'm trying to not scratch the surface of the painting. Just use this to lift up the paper a
little bit so that I can get a better grip on it and remove it later on. There's no need to rush
this. I'm not late for any appointments, and getting done quicker isn't going to make the
conservation any better. So I'll just take my time and slowly roll this back. Now I'm using the edge of
this palette knife, but it's really a blunt edge, and it's using the built-up paper along that edge
to push the paper in front of it. Kind of like a bulldozer rather than a shovel on a icy driveway.
I don't know if that makes any sense. Maybe it does. Maybe not. And once all of that paper is
removed, I'm going to remove the adhesive residue, all that fish gelatin that didn't come off with
the paper. And one ancillary benefit of using washi kozo and fish gelatin is that any surface
grime that is susceptible to water will largely come up during this process, making it so that I
don't need to use any enzyme cleaners or other detergents to remove the accumulated surface
grime. So it's kind of a two-for-one, and even though I have to destroy some beautiful paper,
the paper is doing me a favor by removing some of this old surface grime. With all that surface
grime and all of that adhesive residue removed, I can start to remove the old varnish. And I'm
going to roll a little swab, because this is a little painting, and I'm going to take a mild
solvent mixture, and I'm going to start cleaning in an area where I had previously made a test.
And by rolling the swab over and softening up that varnish and lifting it, we can see just how
dirty this painting is. Again, there's nothing terribly complicated about this process, and
because it's a small painting, it at least conceptually seems easier than if it were a really
big painting. And I don't know that that's necessarily true, but when I'm looking at a small
painting that I have to clean, it feels easier. So that's a nice added bonus of working on a little
piece. And though the painting didn't really look all that dirty, as we remove the varnish we can
see that it really was discolored, and it needed to come off. And as we do so, we can start to see
some pinks and purples in the sky, where before we just kind of saw brown and green. And really,
the sky isn't green at all, it's blue. Cleaning process is always really fun, because I get to see,
perhaps for the first time in generations, what the painting looked like when the artist,
in this case Churchill, decided that it was complete. And so I'm going back in time and kind
of seeing their work for the first time. And this is a pretty bright painting, so cleaning the
varnish off makes a big difference. Now of course, we have all of this excess board that needs to be
removed, and the way that I'm going to be removing it is with a very sharp blade and simply cutting
it off. Now I've made sure that there is no canvas to the right of this ruler. That is, I am not
cutting off any of the canvas. And if I've done my job right and aligned this canvas and this board
properly with the hardboard underneath, when I cut this piece of eight-ply museum board off,
it should be perfectly aligned with the hardboard underneath, and we should have a nice clean edge
and no loss of original canvas, because that would be an abject failure. Certainly not adequate.
And so there we can see it, a nice clean edge. And with the other three sides trimmed,
I can go ahead and fill in the areas of damage. Now I did find a very small, perhaps one centimeter,
tear on the upper edge and a little bit on the right edge. So that is probably why this painting
was mounted to this hardboard. But you've seen enough videos to know that a small tear like that
does not require a mounting or a lining. There are other ways of fixing little damage like that
that are less invasive and have a smaller footprint. Now once the fill-in medium has dried,
I can remove it with a little bit of water and some cotton swabs. I don't roll my own cotton
swabs for this because these little guys are so efficient. And when you buy them, by the $10,000,
you have them lying everywhere. So you gotta use them. Making sure that all of the excess
fill-in material is removed is pretty important because I don't want to cover up any of Churchill's
original paint. I just want to fill in the areas where the paint has been lost or where there are
gaps in the canvas. And the funny thing about this is that this edge that I'm working on right now
will be totally concealed by the frame and the rabbit. So there may not even be a need for me
to do that. Now before I apply any retouching to this painting, I'm going to be applying an
isolation layer. And I often talk about how the isolation layer serves several purposes.
Well in this case, I want to protect this paint layer from my retouching. You can see the painting
doesn't change a whole bunch, so it's not about matching color. In this case, the paint is actually
pretty vulnerable to certain solvents that may be used in the future to remove the retouching.
So by putting down this layer of synthetic resin that is removable with very mild solvent,
I can ensure that if my retouching ever needs to be removed, it can be done so by removing
that synthetic layer. And now on to retouching. I have a little split screen here because
it's not terribly interesting retouching, but I want you to see how the colors get mixed
and how I match them and how I go about the retouching process.
So if I don't hit the mark right off the bat with the color, which is totally normal,
I'm going to apply a base to just start to break up the areas of damage. And then as that dries,
I can start to see if I need to be darker or lighter, or if I need to be more green,
or if I need to be more red, if it needs to be cooler or warmer. And then with that information,
I'll go ahead and I'll change my color. I'll mix in some browns or blacks or yellows or
whites, depending on what it's called for. And then I'll go ahead and start retouching again.
Now, these paints dry very quickly. They're not oil paints. They have a synthetic resin in them
that evaporates pretty quickly. Now, these paints, unlike oil paints, do not have a long
open time. That is, they dry very quickly. So by the time I have left the painting with my brush,
gone back to the palette, mixed the color, and come back to the painting,
that first layer of paint is already dry. Now, that's nice because it means that I can work
fairly quickly. I can apply several layers of paint without having to worry about muddying the
previous layer up with the new layer. But it also is difficult because I can't blend. This paint,
because it dries so quickly, you just can't feather and you can't blend on the canvas. Now,
ultimately, that's really unfortunate for painters. But for conservators, it is absolutely critical
because it is always tempting to just blend it a little bit. Just a little bit. And then a little
bit more. And then a little bit more. And then the next thing you know, you have overpainted the
entire sky because you were just blending a little bit. So by making sure that this paint
does not have the ability to be blended, it keeps the conservator honest and it also makes sure
that we're not going to get excessive overpainting. Now, that said, there are certainly times when I
wish that I could take a one-inch brush and just cover the entire area with a thick layer of
overpainting and call it a day. But that's not what's allowed. That violates all of the ethics
that conservators sign on to and operate by. One of the added benefits about this paint,
because it has a resin in it, it can be softened or reactivated with solvent. So even though my
palette looks kind of messy and dirty, I can use all of the color that's on it. I just have to
apply a little solvent and then I can reactivate that purple or that red or that muddy green,
brown, gray color that I have in there. Now, in the main field of the painting,
there are all these little areas of abrasion. And I'm not going to try to touch all of them up
because that would result in a ton of retouching. And it would also look artificial. The sky would
be completely flat while the rest of the painting still had abrasions. But I'm going to break up
the biggest ones, the ones that are really distracting. And this is a small painting.
It's probably going to be viewed from about 12 to 18 inches away, maybe a little bit more,
maybe a little less. So at that distance, any areas of damage or loss that I see that my eye
goes to or that I find distracting would be candidates for retouching. And with the retouching
dry, I can apply the final coating of varnish. And because I've already applied a layer of varnish,
I can't brush it on because it'll disturb that first layer. So I'm going to use a spray system
and watch closely because I am just about done. Yeah, that's it. Small little painting
doesn't require a lot of varnish. Now, before it goes back in the frame,
I have to do a little work on the frame. And this is not a ton of work, but this painting was behind
glass. And we don't want to have this painting behind glass, not only because this glass is not
UV protectant or anti-glare, but it just doesn't need it. The varnish will protect it, and this
glass makes it hard to see the painting. So I'm going to remove all these pieces of scrap wood
that were put there to hold it in place and remove these framer's points. Or I think they're
glazer's points. Yeah, they look like glazer's points. And these hold the glass into place.
And with these gone, I can take the glass out. And I will probably save the piece of glass in my
storage for several years until I decide one day to clean out my storage, and then I'll throw it
away. And now we can put the painting into the frame. And because this painting fits this frame
perfectly, I don't need any fillers or spacers. I can just drop it in. And I'm going to be using
z-clips or s-clips to hold this painting into its frame. Four is plenty. And I will apply them
and screw them in. And then this painting will be all secure and ready to go up on the wall.
Well, actually, not all secure. You see, I have to add my label. I generally add the label when
I inventory the painting, when I receive it. But because the original inventory label was lost,
I'll just write up a new one and apply it to the back. And this contains an ID number and some
granular information about the retouching and varnish that I used for the next conservator.
And here we have the finished painting. And I've deliberately left the light on
to catch on the painting, because I want you to see the surface.
And in particular, I want you to see what's not there. No ripples, no waves, no creases,
none of the old artifacts from the previous work remain. And that's precisely what we were trying
to achieve. Now, yes, the painting is cleaner. It is brighter. It looks more alive. And some of the
splatter that was on the surface was also removed. But really, this was about making sure that there
were no distractions in viewing the painting and that the painting was preserved. So because it's
that eight-ply museum board, we don't have to worry about the acid from the hardboard leaching
through and discoloring the painting, or decomposing and taking the painting with it.
You see, now it's stable. And we've preserved the look of the painting. So before, we can see
that it's yellowed, some splatter in the lower right corner, and the raking light catches those
ripples. Cleaned and mounted, the ripples are gone, the yellowed varnish is gone, the splatter
in the lower right is gone, and the painting is ready to go back up on the wall and be enjoyed
by everybody. So thanks for watching. I hope you enjoyed this video. Take care.