Some of the links provided are paid links. As an Amazon Associate, we earn from qualifying purchases. We are members of similar affiliate programs with other companies as well. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
Y'all, that last stencil video that we did, you all went crazy for, and we were looking at your
comments. I saw things like, do more Christmas stencils, maybe a double layered, how can we turn
SVG into a stencil, and all these things, and that's exactly what I am bringing you today.
In today's video, we are going to be making a double layered stencil. It's going to be a
and I'm going to talk to you about the do's and don'ts when it comes to choosing an SVG
that you want to turn into a stencil. So, with all of that being said, let's go ahead and dive
right into today's project. So, when I started thinking about making this project, before we
really get into the design space stuff, I want to talk to you guys about everything that you're
going to need. So, I'm going to be 100% honest with you all. We didn't have ink pads in the
So, I wanted to make this project right now and give it to you ASAP, and Courtney had some little,
they are the pin and gear dot markers. So, I kind of had an idea. I think this is going to work. So,
we're going to try this out together. These were on clearance at Walmart for like $3.50. I mean,
honestly, a steal if it really works. So, we're going to use this as our ink today. We're not
going to go out and buy a special ink pad for this, but we are using this pin and gear, the
dot markers. For our stencil, we are going to be using a 5 milliliter Mylar piece. You can see here,
I already have one loaded onto my mat. I will say this, you are going to need either a very strong,
a very new standard grip mat. This one is actually pretty new, if not brand new. If you don't,
I would highly suggest using a strong grip mat, and if you don't have a mat that you feel like is
sticky enough, don't worry. When all fails, I will tape stuff down. So, if you feel like you have to
tape it down to get it to stay on your mat, just go ahead and use some painter's tape and get that
stuff taped down. You don't have to go out and buy a new mat just for this, but you do need to
try to use the stickiest mat you have. Other than that, the only other things that we have are a
couple pieces of paper here. We've got a white that we are going to do the stencil on, and then I have a
red here that is going to be my card base. These are both from Celebration Warehouse. We absolutely
adore Celebration Warehouse cardstock. Everything that I'm going to be using is going to be linked
down below for you, so I just wanted to come to you, show you everything we're going to be using
before we actually dive in to the design space part of this. So, let's go ahead and head over
to the computer and let's get our card made and set up, and then we're going to cut it on our
Cricut. So, before we jump into design space, let's go ahead and start here on the Makers
Gonna Learn website, and let's talk about the importance of choosing the right file for your
stencil. So, not all files are going to be made equally when it comes to stenciling, and there is
a reason behind that. So, when you are choosing your stencil, if you are wanting to create a
layered stencil, it can be a little bit easier to create layered stencils than it is just a single
stencil. So, let me show you a good example of what I would think would be a good for a layered
stencil. So, this file right here, you can see it is a pretty simple shape. It has the base of the
strawberry. It has the cap and the stem all in one shape, and then it has the seeds by themselves. So,
you can turn this, easily turn this into a three-layered stencil. Same thing with this
witch's brew over here. You can have the base of the bottle, then you can have the top as a second
layer, and then the stars and the liquid as your third layer. So, those are good for layered
stencils. However, when you are thinking about creating a single layer stencil, for example,
let's look at this pumpkin. Now, the bats just by themselves would be perfectly fine. However,
when you go to cut out this pumpkin, because the outside of the SVG and the inside it's created
with these lines, you are just going to lose these inside pieces, and this pumpkin is just going to be
one big blob. So, let me show you a good example of what a single layer stencil would look like.
Really, what you are wanting to do is you're wanting to find just a pretty simple shape if
you are just doing a single stencil. So, I'm just going to search leaf. These leaves like this, like
leaf one, leaf two, are really good examples of what a single layer stencil file would look like.
The inside of this, if you were to cut this out, your Cricut is also going to cut out these inside
pieces, and then when you pull it up off of the mat, you're just going to lose that detail, and
it's just going to be one large leaf. So, you kind of have to think about that when you are creating
your stencils from SVGs, but the one that we are going to be using today is actually the
three hanging ornaments. It is linked down below for you. If you are an MGL member, you can access
this for free. If you are not and you want to access this, we do have an awesome seven-day trial
that you can check out. It's going to be that first link down below. So, this is the file that we're
going to be using, and you can see that it is going to be really good for two layers. One, because
none of these layers are really touching. Now, it looks like these diamonds are touching these red
lines, but it doesn't matter because we are creating a double layer, but either way, this is a
really good stencil to start with if you are wanting to kind of learn more about layering
stencils. So, what we're going to do is we're going to download this by clicking this arrow pointing
down. It is going to go straight to your downloads. You can see here it is an SVG. Once you have
downloaded that, we're going to hop over to Cricut Design Space. You can see I already have it
uploaded, but let's just go ahead and delete it and let me show you exactly how you can upload that.
So, going over here to the left-hand side of your screen, if you'll click this upload icon, you're
going to go to upload image, and then I'm just going to bring my finder back into view, and I'm going
to pull that SVG into Design Space until that box turns green. For some reason, it does come up fuzzy.
It's not fuzzy when you actually add it to your canvas, so we're just going to click upload, and
there we have our file with two layers, and we can see that there are two layers here by this drop-down
menu. It shows us that we have the green layer and the red layer here, and now we are ready to start
building the base of our card. It is very easy to build your card. All you're going to need to do
is come over here to shapes. We are going to grab a square. I'm going to pull it over here to the side,
and then to make an A2 card, what we have to do is we're going to be making, we're going to unlock
the size aspect ratio. We're going to make the width of our card 8.5 and the height of our card
5.5, and then that is going to give us the base of an A2 card. Now, let me change the color of
our canvas here to a light gray, so we can then change our card base. We can change it to red,
white, whatever, just so we can see this a little bit better. The next thing that you are going to
want to do, because although we are cutting out this card, we're going to have to fold it in half,
and it makes it a lot easier to get things precise when we add a score line. So, we're going to come
over here to our shapes. We're going to grab a line here. Just going to collapse this back down,
and I'm going to make the height of my line the same as the height of my card, which is 5.5,
and now what I can do is select both of these. I can come over here to a line, and I can center
them perfectly, and now I have a score line right down the middle of my card base. We're not done
yet. We do need to attach that, so what I'm going to do is I'm going to go to attach, and I'm just
going to attach that score line. Otherwise, if you don't tell Cricut what to do, it's not going
to know to score that right down the middle. So, this is the base of our card. Now what I want to
do is I want to build the front part of my card so that I can have a white kind of like front face
on here to put my stencil. So, I'm going to come over here to shapes again. I'm going to grab
another square, and I want this to be just a little bit smaller than the facing of my card.
So, I'm going to once again unlock the size aspect ratio. We're going to make this 4 by 5.25.
So, now we can see that that white base, and let's just go ahead or the white facing not base,
but the white facing. We're going to put this on the front of our card, and it's going to give us
that red border, which is going to be beautiful. And now, that is what we're going to cut out of
the white cardstock and actually stencil on, but we still have to create our double layered stencil.
So, because I want to keep my stencil the exact same size of the what I'm going to be stenciling it on,
I'm going to select that layer, and you can tell it's selected by over here. It's highlighted green,
and I'm just going to duplicate that twice because here is what I'm going to have to do. Because we
are creating a double layer stencil, we do have to have two separate stencils. After I've done that,
I'm going to bring this down, and I'm going to size this to fit perfectly onto this card front.
So, let's just size it down and place it exactly where we want it. Now, one thing you do have to
be aware of is when you are creating the stencil, you can't have these hanging off the top or it's
going to cut that off. So, I'm just going to pull this down just a little bit to give us a little
bit of wiggle room there, just like that. And then, I'm going to select that ornament, and actually
what I'm going to do is I'm going to delete this second one. I'm going to select both of these and
duplicate them both together because I do not want this to move at all. Once again, we are wanting
to create a stencil and we don't want anything to move because it is a double layer stencil.
So, hear me out. Just hold up. So, the first time for this first one, let's say we want this one to
be the red layer of the stencil. So, for it to be the red layer of the stencil, I'm going to select
the green portions, and I can tell that it is the green portions because the color up here
in my operation section will change. Here, you can see when I click this one, it's going to turn to red.
So, we're going to start with the red one. So, what I'm going to do is I'm going to delete out the green
portions here, and then I'm going to select both of these. Now, because it is two layers, I have the
option to do this, but with those two selected, I'm going to click Slice, and then I'm going to get rid
of all of the outside slice results, and there is our red layer of our stencil. Now, on the second
one over here, we are wanting to get rid of the red and slice out the green. So, I'm going to drop
down this menu here. I'm going to select the red layer. Remember, we duplicated after we sized the
very first time, so we don't want to select from the actual canvas. We really want to focus on
selecting from the layers panel. That is just going to ensure that nothing moves and nothing gets
moved around to where it doesn't fit right. So, once again, we're working on the green layer here. So, I
am deleting out the red layer just like that. I'm going to select both the white and the green layer.
We're going to come down here to our operations, and we are going to Slice, and we are going to get
rid of those slice results, and there is our green layer of our stencil. So, zooming back out, we can
now see that we have our card base in red, the facing of our card in white, and then we have our stencils
that are, that is our red layer here and our green layer. Now, I'm just going to go ahead and change
the colors from white. We'll just go ahead and change it to black so that we know that this is
our stencil layer, so that it's not going to cut on the same mat as the white cardstock, and now that
we have this set up, we are ready to cut it on our machine. So, what we're going to do is we are going
to make sure I have the proper machine selected. I am going to be using a Maker 3 today. We are
going to go to Make It. I would go ahead and save my project. We'll just do this as ornament Christmas
card and save, and you can see it is now going to put it on all of these separate layers. So, we're
going to go ahead and start with the stencil layer just because it is what I have loaded on my mat.
So, let's come over here to our machine, and I'm going to go to Continue on my canvas. We're going
to make sure our Cricut connects to our machine, and then I'm going to go to Browse All Materials,
and I am going to be cutting this on the Mylar setting. Once we have picked that, I'm going to
come over here. We're going to load this into our machine, and then we are ready to press play.
Now, let's go ahead. Let me pull you back just a minute because there's one, there's a couple
things that you need to do before we unload our mat always is, especially when working with Mylar,
I just want to make sure that it did cut all the way through. So, I'm just going to
take my true control knife and make sure that it did, and for some reason, maybe it's because it
is down on the mat really well. It looks like it did, but I can't get it to come up. So,
give me just a second. Okay, it did cut through really well. If, for some reason,
your material does not cut on your mat properly, do not unload it. Check it before it unloads.
Make sure that you make this a habit to check your cuts, especially on new materials,
before you unload because you can hit this play button again, and it will cut it all again
exactly where it's at. So, just make sure you check your cuts before you unload.
This did cut through. We're just going to go ahead and unload, and now let's see how well
it cut our Mylar stencil.
So smooth and crispy. So, let me go ahead and pull this one up. Oh, yeah.
Look how nice. I don't know if you guys can see that. Let's, there we go. So, that is our green
layer, and then here is our red layer. So nice. Okay, so now what we're going to do is we're
going to cut the white portion and the red base of our card, and then we're going to get to stenciling.
So, I have pulled out my light grip mat for this. So, I'm just, I'm using a scrap piece
of paper. I'm going to lay that down on my light grip mat. I'm going to take my burnishing tool,
burnish that down on the mat really well. Then, I'm just going to make sure that my, I'm selecting
my card here and making sure that it is going to fit, and it will beautifully,
should not have a problem, and then we are going to cut this on medium cardstock.
We're just going to load this into our mat, or load it into our machine, load our mat into our
machine, and I'm going to bring my computer over here so we can work a little bit easier,
and hit the play button. Now, while that's cutting, you will have pieces left on your mat.
If that's the case, grab a really, like a plastic scraper tool or something,
and my favorite way, we'll just go ahead and load up this, my favorite way to get these
excess pieces off is just with a scraper tool, and just kind of scraping it off. You can see
we even had some paper on there. Instead of trying to individually pick those pieces off,
using a scraper tool and just kind of really gets those pieces off. So, we now have this one cut.
This is going to be what we actually stencil on. Beautiful, and now we just need to add in our
actual card base. Once again, adding our paper down onto our mat, grabbing our burnishing tool,
burnishing that down really well, selecting medium cardstock,
and loading this into our machine. Now, if you are using a Maker 3 or Maker 4,
it's going to automatically choose your scoring wheel. You have to go to edit tools and choose
a scoring stylus, and what that is going to do is it's just going to allow you to cut and score all
at the same time without switching anything around. So, now we can use this scoring stylus
instead of having to switch out and put the scoring wheel in here. So, we're just going to
hit play there, and we're going to cut out the base of our card, and then we're going to start
stenciling. Beautiful, now all we have to do is unload, and look how easy that comes off the mat.
So, now let's start the actual stenciling process. So, what I have here on the table
is I have my two-layer stencil, green layer, red layer. I think I'm going to start with my
green layer first, and the reason that I made it the same size as the facing of my card
is because look how well these go together, and there's no guessing of where they are supposed
to end up, like where I should place this. So, that is why I made it the same layer or the same
size as my card facing. So, now all I have to do is line that up like this. If you want to tape it,
you can, and I do think I'm actually going to do that, and I'm just going to tape it down to the
table. So, I'm just going to line it up. I'm going to kind of pick it up like this,
probably go ahead and add my tape here, make sure that it stays lined up,
and then we'll just lay that down on the table. Now, if you're going to tape it, you need to make
sure you're not taping over where your stencil is going to go, just to be on the safe side,
or actually not just to be on the safe side. You can't, if you have tape over where your stencil
is going to be, it won't go through it. One thing I did not talk about in our supplies is I do have
this little brush. To me, this looks like a makeup brush. If you are a stenciler, this is not a makeup
brush to you. I've always been a makeup girly. This to me looks like a little makeup brush,
but it is actually meant for ink and blending ink. So, what we're going to do is, remember,
we are trying this dot marker. Not sure if it's going to work, but we're going to try it. So,
what I'm going to do, the reason I have this notepad over here is I'm going to kind of press
this down. My thoughts are is I can use this and get the ink off of that and then blend it. So,
this is just my thoughts. Let's go ahead and see if it works. So, I've got a little bit of ink here,
and then I'm going to start blending this onto my stencil. So far, guys, I think it might work.
I think it might be working. So, getting that ink on there, blending it out.
So far, it is looking really good. Really good. So, once again,
dotting that. I'm trying to do this one-handed so you guys can see.
Getting my ink off of there, and then, I mean, so far, I'm impressed with this
ink dotter. So, let's just keep going. Okay, guys, I think we are done with our
green layer. So, what I'm going to do is I'm just going to pull my stencil up. It looks really good.
There's a couple places that it bled just a little bit, but that could be a user error.
But now, what I'm going to do is I'm kind of wiping my brush clean from that green ink.
This is just on an extra piece of paper, and then I'm going to pick up my red stencil.
We're going to line it up just like that. I'm going to grab some tape here. Now, this one,
you do have to be careful because I'm going to put it on the bottom here like this because on
the top, remember, we have our little, um, so we're just, and once we have it taped down, we're going
to do the same thing with our red that we did with our green. I'm going to go to another page,
and I'm just going to bring that ink to the top, put it on our brush, and start adding it to our
page. So, the red just right off the bat, I would say the red to me is giving a little bit more
pink. So, you may have to go over if you, if you use these. If you have regular red ink, you,
I'm sure you're not going to have this issue, um, but so far, this is what I'm seeing with the
daughter is the red is just looking a tiny bit pink to me. It's not that it's not pretty.
Also, I feel like it's not being, I guess I also probably should have cleaned my brush
off a little bit more, but I don't hate it, and now time for the big reveal to see how our double
layer stencil works, and I don't know about you all, but I am pretty darn impressed with that
daughter ink. Now, let's just go ahead and assemble our whole card together. Now, what we're going to
do first is we are going to fold this card on the score line just like this, and then we're going to
put our card facing on the front. Now, if you wanted to, you can do this with either a double-sided
adhesive, or if you want to give it a little more dimension, I think I want to use these foam
squares. Those are teeny, teeny, tiny. I don't want the teeny, tiny ones. I need the larger ones for
this project, so let me put the teeny, tiny ones back, and let's grab a couple of these larger ones
because I really like cards with dimension, so I am going to add at least four foam squares for sure
on each of the corners. Probably going to add one or two in the middle just to give it some stability
in the middle of the card as well. It really is just personal preference,
and then once you have added your foam squares, we are going to take the backing off
and add it to the front of our card, and we have an amazing double-layered stenciled Christmas card
that did not take us any time at all, and you can do these once you have created the stencil.
You can make these, and I'm telling you, having a handmade holiday really does elevate it. It
could even help you save a little bit of money, and handmade cards are just so much more special
than a store-bought card, and look how stinking cute this is, and now you can add. You could even
add another one of these white, like, facing pieces to the inside of the card if you didn't
want to write on the red, but y'all, I'm obsessed. I can't believe it. Look how cute. Oh my goodness,
guys. I can't wait to hear what you guys think about this. Once again, if you are a Maker's
Gonna Learn member, you have access to this file and can create this card or any other files that
we have. You can create your own double-layered stenciled Christmas cards. If you're not,
I want to invite you to check out that first link down below. We have an amazing offer for you,
which is a seven-day trial where you get access to our whole website for seven days to try us out
before you even decide if you want to become an MGL member, so definitely make sure you check out
that link. I also want to hear your guys' thoughts. Do you love this card? What would be a card or what
would you put on the front of your card? Also, what are your thoughts on these dot markers?
Were you impressed as I was? I have not really stenciled a lot, so I can't speak on how well
some of these inks are. I've not used them all, but I mean, for $3.50, I was very, very impressed
with this. I'm sure I would be just as impressed with actual blending ink, but for those that are
starting out with stenciling, I think this might be a good option, so definitely see if you can
find them on clearance at your local Walmart. Check it out, and once again, leave me a comment
down below. Tell me what you thought. We would love to hear from you, and we love to hear what
you would like to see from us next, so make sure you leave us a comment down below. If you haven't
already, hit that like button and subscribe to our channel, and hit that bell notification so
that you can be notified every time we get crafty, especially during this holiday season, y'all.
We have so much in store, so make sure you subscribe so you don't miss a thing.
We'll see you guys in the next one.