STEM Aluminum Boats Part 2

Terrific Physics
39 followers
Sep 25, 2025
Hi, I'm Jared with Fun Science Demos. In a previous video, we talked about making aluminum foil boats
and seeing how much weight those aluminum foil boats will hold until they eventually sink.
Well, today we're going to talk about making different shapes with our aluminum foil boats.
The boat building process is exactly the same. You'll need a ruler, heavy-duty aluminum foil,
and a marker or pencil, along with the scissors, and then you're ready to go.
So we've zoomed in so you can get a closer look at how this works, but the process is the same.
We're going to start with a shape. In this case, I'm going to draw a triangle.
I want to center that triangle in the center of my aluminum foil. So I can measure that.
So let's go with a 10-centimeter base for my triangle. And let's say that we want our triangle
to have a height of 10 centimeters. So now I'm going to just mark the apex of my triangle,
line up the corner dots, and connect them. One more side, and my triangle is complete.
So now that's going to be the shape of the bottom of my boat. Now I just simply need to expand my
triangle out by lining up the ruler with the edge and then tracing the opposite side of the ruler.
I'm going to go and make my way around the entire triangle. It's really important for
these different shapes to extend your lines as long as you possibly can. Last side, line up the
ruler, trace the outside. And now I have an inner triangle and an outer triangle, and I'm ready
to cut out the outer triangle. So we have our boat cut out. Now it's time to make the sides.
And to make the sides, I'm going to fold the outer edge until it lines up with the inner line,
just like this. Line up the outer edge with the inner line and make a nice clean crease.
Work your way around the shape, line up the outer edge with the inner line, make a crease. Now you
don't need to worry about this little tab. We'll take care of that in a second. One more outer edge,
line it up, crease it. Now if these tabs bother you, you could fold them in to get rid of them,
or you could trim them off to get rid of them. It doesn't matter whether you trim it or
fold it. I personally like to trim it so I don't have much foil in my corners and it doesn't get
in the way when I go to pinch the sides. Now it's time to fold up the sides of our boat. To do that,
I want to fold along that inner line. I'm actually going to make a crease because it works a lot
better when I put a crease in and unfold it. Unfold it, next side, put a crease, unfold,
then fold one last time along the line. Now I'm ready to bring my sides up. It gets a little
tricky because I want to put a crease in that corner as I fold my sides up. Same thing, put a
little crease in the corner so my sides are able to fold up at the same time. Now you can start to
see it taking shape. A little pinch in the corner and I'm almost there. Now I have to just fold
these tabs. I'm going to fold it this way, fold this corner this way, pinch the corners, pull
the sides if they're a little loose, then they'll tighten right up. And this one I'm going to fold
over and now I have a beautifully formed triangular boat. Now the awesome thing about that design
technique is that you can use the same technique to make different shaped boats. A trapezoid boat,
a parallelogram boat, but instead of showing you how to do it, we're going to challenge you to see
if you can make these on your own using our same technique. The neat part about making boats that
are different shapes is that you can compare them to see which boats work better and that's exactly
what scientists do. Now the real challenge is to see if we can use this technique to make a boat
that has a round base. Here we go. Now to make a circular boat, I could use a ruler if I was
willing to drill some holes in that ruler that would allow me to make a circle, but I'm going to
use a compass. So I want my circle to be in the center of my aluminum foil, exactly like all the
other designs. For my circle, I am going to mark the center of my circle with my compass and I'm going
to measure out, have a smaller circle for a base. Now I don't want to move my compass because I'm
going to extend out further and make a bigger circle around my center one. You'll notice this
is very similar to the other designs, but in this case we have a circle. So we've zoomed in so you
can get a better look at how we're going to fold our circular boat. Now this one is a little tricky.
You can pick any point on your circle to start. I'm going to say follow the same process,
fold the outer edge of my circle until it hits the center line. You're going to notice it's not
going to be exactly smooth. So after that fold, I'm going to come over to this end right here.
I'm just going to start repeatedly folding the outer edge of my circle up to the inner edge.
I'm just going to go right to where those, that peak is formed. I'm going to keep folding off of
the end of that fold. And you'll notice I'm creating the edge of my boat. I just have to make
a lot more folds than I did in the other boat designs. Fold the outer edge. This one,
I think I'm going to fold like that. And then one more fold to bring it up.
Okay, now I'm ready to fold up the sides of my boat. Now this is the trickiest part because I
can't crease that inner circle to make the folding easier. I'm going to start to fold up,
as I fold up, you'll notice, watch what happens to the edge or the side of my boat. As I start to
fold around, I have a lot of extra material. So what I'm going to do is overlap and fold that
material together to form a pleat. And as I start folding up the edge, anytime I have a little extra,
I'm going to fold it in on itself. And I'm going to keep going a little bit of extra there.
Just pinch it together. I fold this up. There's a little bit of extra. Now you can see my side
starting to take shape. Anytime you have a little bit of extra aluminum foil, just pinch it together
and form a little bit of a pleat or a fold on the side. Now you might notice you'll have a little
low spot on your boat. That's why you may decide to choose to make the edge or the bigger, the
outer circle a little bit bigger. So, you know, you have a standard size for the side of your boat.
After you fold the aluminum foil in on itself, you should have a circular boat. So we have a tray full
of boats that are all different shapes and sizes floating in our little container. But scientists
and engineers are always trying to figure out how to make something better. So how do we figure out
which shape boat works the best? Well, that's going to be our next video. We're going to talk
about how we measure the bottoms of the boat to compare how many paperclips each boat can hold.
If you want some other ideas for STEM challenges, check out our YouTube channel Fun Science Demos.
Science is so cool, especially when you can design something and make it on your own.
Whatever floats your boat. Thanks for watching.
