Designing an Edwardian Dress with Crocheted Lace

Edwardian Threads
5 followers
5 Video Views·Sep 24, 2025
I made the first garment being part of the Snow Queen Gown: the combinations.
MATERIAL USED:
Cotton Voile: 2m
Silk Thread: Gütermann
Cotton Thread: Gütermann
Cotton Satin Ribbon: Anita Pavani Stoffe, 3m
Cotton Crochet Yarn: Schoeller & Stahl, No 30
Hello everybody, let's right jump in. As you may know I had the idea of making an Edwardian
inspired dress incorporating a lot of crocheted lace. So I start with the very base layout,
the undergarment. In this case a pair of combinations. I found many examples but I
settled for a version that can be found in the archive of the Met, which is dated back to the
1890s to 1900. Based on that I first made a sketch to visualize my idea and further searched for a
historical pattern. In the needlework and cutting by Agnes Walker I found a pattern that suited my
idea so I drafted it based on the given instructions and my personal measurements using a digital
drafting tool called Valentina and quickly went on to the first mock-up. But I messed it up.
There were two things I completely got wrong. One thing is, as you can see, this is way too small.
I thought, okay, if I take the bust measurements and this fits the pattern it will be all right.
Well, it's not. Because then here is way too much material so that even if the bust
measurement would maybe fit, it doesn't because here is not enough material. So I made some changes.
I realized that actually not the proportions were a problem because when I tried to scale it
I realized that what I had in mind made this part, this one piece, so big it wouldn't
rest in itself. So I came up with another idea. So I changed the back pieces. I just made them as
the front pieces and decided that I now will try to fit it. So I wanted to end more at the waistline
so I have to shorten this. And the good thing about it is now it fits way better.
There's enough room. Here's something going, yeah, strangely, but I will figure that out.
So now I have to edit the waistband and I think it looks much better now. Only here at the back
there's so much material. I will take something out here and I guess the next step I do is to
cut off the seam allowance to see how deep the neckline goes because now I think it's a little
bit too high. But first I will cut off all the seam allowance to see if that makes it better
and add the drawers. I just finished to add the drawer. I had the problem that this part here,
the lower upper body, was too short. So it was too tight at the crotch. So I added some material
around the waist. Because I used old scraps from other projects, I tried to piece it all together.
And the other thing I did is I took away a little bit material here because it made a hook I didn't
like. And I added a little bit more material at the back strap because when I was wearing it,
it teared here. So yeah, I hope this is better now. The next thing to do is make the legs
because now they are too long and they don't have that toughy, lacy fringes.
She's finished! I've made my first mock-up. Actually the second one. I
had some trouble figuring out how long I want those legs. But I decided to go for the long one.
So now I will mark where I want the lace to be. This part and down here. And cut it all out
and make new patterns. The final version of my pattern has quite a lot of alterations in
comparison to the original pattern I used, especially in the length of the leg pieces
and the cut of the bodice. Partially due to the insertion of the lace, I already planned to the
pattern in order to avoid wasting fabric. So once I was pleased with the pattern, I continued with
marking all the pattern pieces on the actual fabric. I went for a chic cotton wall based
on the inspiration. And once this was done, I cut it all out. Here I have the two leg pieces
and I will start with those two seams and closing them. Because I thought I will start with the legs
because I already have crocheted the lace for a waistband. So I think I will start here with those
seam line. And I will do it by hand. Since it is the first time I recreate a historical garment,
I wanted to make it as historical accurate as possible. And I read many times that linen
thread was used in those garments. So I purchased some and started fairly enthusiastic with my very
first hand-sewn seam. But I didn't do a great job. I made my first sewing line. But this linen thread is
so thick and so stiff. It looks really... it really tears apart the fabric at each thread of the fabric.
So I tried to use some cotton thread because I really want to use a natural fabric. And I think
that this works way better. It is finer and the sewing line just looks more neat. But well, I have
to practice on the regularity of my stitching. But I think with time this will come. Now I have
seamed together both legs and I have completely hemmed. And I already learned some stuff.
Because as you can see here my hemming became much finer. My first hem was a lot
bigger than the second. And these are the two matching seams of the legs. This one was the
first one. And as you can see it's much broader but wider. And I also made a mistake when I
felt it down. I've cut down the wrong side. So now the not so beautiful side is seen here.
Meanwhile at this one here's the same seam. Here I've cut the right side and felt it down.
So this looks much better. But I think as it is a process of learning I will let it be that way.
So I just wanted to hem the ruffle and I realized that it is too short. Because what I have cut out
is the ruffle for the back and the front. But in the reference I've read there is
said that you should at least use twice as long as where it should be gathered in.
And this is not twice as long as this. So I'm thinking about
yeah adding another ruffle. But I'm not sure if I cut this out. I cut this so that I have
double the length. Or if I slit it in. But this means I would have to make a lot more of
crocheted lace for the part here. So I guess I will cut this here.
So now I have the full length for the ruffle with four stripes. In the meantime, mostly when it was
already too dark and filming got difficult, I crocheted some samples for the waistband.
For this I used some references of historical and modern crochet patterns
and adapted one to fit my needs. I first made this one. I wanted it to look a little bit like a
snowflake at the edge. But I think it's too much going on. You can't see the pattern here. So
I decided I won't go for use that one. And I also made it in a really thick yarn. This is the
three and a half needle just to be fast. And so because of this I didn't like that.
I started with this one. This is... I found a pattern for this and I had the idea
to just put them together like this and to insert a ribbon in those gaps.
And here I thought it would be fun. It looks nice. But with the really fine yarn I don't like it
anymore. There are these nibbets I don't like. So I think I will go for this rather clean design.
And... oh you can't see it. So here it is.
Once the waistband was complete, I gathered the upper part of the legs and struck those gatherings.
Then I sewed it on with a whip stitch. Actually I wasn't that happy with this method
since I ended up with that tiny hem standing upright behind the lace instead of having a smooth
intersection of the lace and the fabric. But at this point I wasn't willing to rip open the whole
hem and instead decided to go on with it. The next step I took was sewing together the ruffles
and crocheting the insertion lace that will be placed between the leg and the ruffles.
This ribbon is composed of a ribbon which is crocheted to the length of the leg
and then I added a couple of rows to the sides in order to get a clean edge.
Especially in the first days I used a leather symbol to protect my finger against the somewhat
pointy needle. Since the crocheting of the lace took quite a while I also started gathering the
ruffles. Since I didn't like the way I had sewn the legs onto the waistband I now decided to use
a different method and gathered the edge by whipping and gathering. Basically I'm creating a
tiny roll at the edge of the fabric, stitching around it and pulling the thread tight every
couple centimeters. For most of the garment I used a cotton thread. Only when it came to the
whip and gathering of the ruffles and the body I used a silk thread because the cotton thread broke
every couple of centimeters and the silk thread proved to be a lot sturdier. Once the insertion
lace was complete I pinned it onto the leg and sewed it on with a whip stitch. Following that
I sewed on the ruffles on the other side of the insertion lace using the same method, just
enhancing the gathering a little bit by pulling the material in. In order to know how long the
lace ribbon for the upper body has to be I now went on and sewed the bodice together with the
side seams and the felling of front and upper edges. The lace for the body is also based on
crochet patterns I found on the internet but this time set together out of different patterns.
So I had a pattern which I used as a base and when it is long enough I added some more rows to the
sides to achieve some more fanciness. Finally the base for the bodice had the length I believed
would be sufficient. In fact it was a little too long so I had to rip open a couple of rows.
Now I went on and added the rows to the side of the ribbon and once this was done and I had steamed
the lace I pinned it on the bodice and whipped it on. This way I got a smooth and clean edge and the
sewing is almost invisible. So last night I finished the lace band and I sewed it on. Now I'm thinking about
adding a lace here. I don't want it to be as broad, as wide as this one. Otherwise the other idea
would be to let it be as simple as this but I don't like it. I think I will make a smaller
crochet lace here. Then I have to crochet the stripes for the holders and I have to think about
how to close this. I think I will go with some tiny hook and eyes but I'm not sure yet. And another
step I have to do is to sew this on the waistband but I think I will first make the lace for the
front here so I know where I have to sew this on but because it won't be here I think rather here.
Yeah, that's the next step. So I just have finished this crocheted part and I was thinking about
this part here because this outer edge should look like this one. So this one is actually this part
here and I was thinking if I put it here I think it's strange if it doesn't go on here. So what I
was thinking that I now go on and sew this on and this and afterwards I make this outer part of the
lace. That's my plan for now. Now I went on and crocheted the second lace for the front closure
and once this was done I put it all together. So the upper part is completely made. The whole lace
is done and I think I made a mistake figuring out how much material I'd need here. So it's a little
bit, yeah, peeking out here but I will see how this works. Maybe this part will sag down a little bit
so it isn't that obvious anymore. I will see. I will have to make the closures. I think I will
add tiny, tiny, tiny, tiny little buttons. I can close with a gap of this pattern and I have to
make the shoulder straps. I first thought I will crochet them but I think there's already
enough going on so probably I will just make them out of the base material and add only
a tiny bit of the crochet at the sides. So yeah, I think I will do that now and cut them out and
sew them on and I have to figure out if I want to sew it on here or there. I'm not sure about that yet.
So I've just finished hemming the shoulder straps and defining where they should sit
and now I'm wondering if I add some lace at the edges. I think this, only this is too small and
two rows is too clean. So I'm now wondering if I just add this part
or if I just let it be really clean but I'm not sure. Maybe I will just make one stripe
or one ribbon with this pattern and see if I like it. So I just finished the first edge lace
to see if I like it. It has to be steamed because right now it was really
frilly but I like it so I will go on with it. So I went on and crocheted the remaining three
ribbons and steamed them. One thing I learned during the creation of these combinations
is how important steaming is to create beautiful crocheted lace. While the lace is in the making
it twists in all directions and only once it is steamed into place the tension creating a twist
releases and the lace lies nice and flat. Especially with points the steaming is rather
important since you can fixate these into place. To enhance this further it would be possible to
starch the lace but I didn't do that here because I found the lace sturdy enough.
Then I went on and sewed the lace on the shoulder straps.
So now I have sewn on the lace at this side at the front side and here at the back side
and as you can see here's a little row of the seam and here not. I prefer this side
but I won't open this one. I just changed the sewing direction on this part and I will put
it on the front side of the bodice. But yeah now I have finished this part and continue with the
second one. I tested on me where the straps should be placed and when I finally had decided where I
them on with a part of the lace peeking over the strap. Since I was pondering for so long how
I want to close the whole thing I went searching how to make some buttons. I didn't like the
buttons I had currently available so I thought it would be a good idea. I came across some thread
buttons which were commonly used during the 18th century on men's shirts and I decided to go for
these. They are not period accurate I guess but I like their look and allowed myself some freedom
at this part. Now that the combinations were almost finished I ran out of yarn. So for the
final lace which I want to add to the ruffles I was only able to make some samples and the part
of the first ribbon but then I had to wait. I actually ordered some new yarn but I messed up
with the specifications so it is too thick and since there is no store in my town selling this
yarn I had to ask a friend to buy some for me. This will take a while so I decided to go on and add
the satin ribbon to the waistband and the legs. Since I put some effort in using only natural
fibers in this project I looked for some satin ribbon not made of polyester which was quite
difficult but I was lucky and found an online shop selling cotton satin ribbon. One side effect of
this decision is that the ribbon can't be fixated with heat like a synthetic one so I tried some
nail polish but I regretted it soon due to the darker spots at the edge and I cut it off and
just hope that the diagonal cut of the edges is enough to prevent from frilling. After inserting
the satin ribbon into the lace I tried a couple of methods to connect them but again I wasn't
satisfied with the outcome. Another idea that came into my mind led to another solution. I realized
that it would be great to be able to remove the petrol ribbon for washing. This way I don't risk
any color bleeding. So I went on and sewed a press button on the edges of the now hemmed edges of
the ribbon. I'm not completely happy with that because they are out of plastic and it doesn't
now despite the missing lace for the ruffles of course but I decided to make a fitting and show
you the actual result. Once I have the matching yarn I will go on and show you the final result
of course. But for now I will continue with the corset so stay tuned, leave any comments if you want
and I see you in my next video.
