HOW TO: Fix BROKEN or CRACKED aquariums

Fish for Talks
2 followers
Hi everybody, Joe here again and welcome back. So in today's video I'm going to show you guys
how to repair a broken glass aquarium. This video will concentrate on tanks that are actually
cracked. If you're looking for a video on how to reseal an aquarium I actually already did a video
on that previously and you can go ahead and watch that video. So a cracked aquarium is not the end
of the world however depending on where the crack is will depict on how we're going to fix it. Now
there are two different types of cracks. One crack that is on one of the side or a front panel or
even the back panel and then there's the crack that's in the bottom of the tank on the bottom
panel. In this video we're going to talk about how to fix both types of cracks as well as how
to prevent them in the future. The easiest type of crack to fix is if the bottom panel cracks. If
the bottom panel cracks we actually need to do three things. We'll first need to find out why
it cracked and we'll have to go ahead and repair that problem or prevent it from happening again
in the future. We then need to alleviate the stress on the bottom panel. Finally we can go
ahead and move on to actually fixing the crack. Now figuring out why the tank cracked in the first
place is usually due to one of three reasons. The first being something fell in your aquarium like a
rock or something like that and cracked the tank. Or maybe the stand surface is not flat and true
and because of it caused the tank to actually twist and then crack. Or something was underneath
that bottom panel like a small pebble and caused enough stress on that bottom panel to crack it.
So knowing if your stand actually has a flat surface or not is really simple. If your aquarium
has a bottom trim on it all sides and corners will be touching when the tank is empty. Don't
judge this by when the tank is full as because when it's full it could potentially twist and
settle down on the stand to make it look like the stand is flat. Now if something fell in your
aquarium that would be extremely obvious. Finally something might be stuck under the aquarium. Now
this is actually only going to be possible if you don't have a bottom trim and the glass lays flat
on the top of the aquarium stand. Now this won't be possible on a tank that has a trim because
you'll notice that those tanks that have a trim have an elevated bottom panel so they don't
actually touch the surface of the stand just the perimeter of the tank. If it was the stand fix it
take it apart and rebuild it if you have to. Just make sure this time it's level and square. Now
something fell in your tank there's not a whole lot you can do to fix that however you can go
ahead and prevent it in the future. After you've repaired the tank and the tank is absolutely
completely void of all decorations and substrate before you put anything back in lay a sheet the
size of the entire aquarium of egg crate or commonly known as lighting diffuser on the bottom
of the tank then put your substrate over it and then your decorations back in. In the future if a
rock falls that egg crate or lighting diffuser is going to absorb that impact and cracks are
less likely to happen. Even after doing that you might even want to reconsider the layout of the
tank. If you're against reconsidering the layout of your tank then at least consider either silicone
or cementing your rock work together to prevent it from falling in the future. So now that we've
figured out how to find the root cause of the crack and how to prevent it from happening again
we can now move on to actually patching that crack. Now if your tank has a bottom trim on it
you'll know like I mentioned earlier that the bottom pane actually floats and doesn't touch
the aquarium stand. However because of that now that it has a crack that bottom pane is going to
sag and the crack is going to spread apart even more. So since we're not actually going to replace
the bottom pane we need to support that bottom pane to prevent any further sagging. One of the
best methods is to use a piece of styrofoam that is the thickness of the bottom trim meaning the
thickness between the stand and the bottom pane. We'll go ahead and lay that styrofoam on the inside
of the aquarium underneath of it and we'll want to have it the exact size of the aquarium so it
supports the entire bottom pane. Now this is not only going to support that bottom pane and stop
it from sagging it's also going to absorb any irregularities that maybe small pebbles got in
between and it's not going to allow any pressure points to build back up on that bottom pane. Now
if your stand is actually an open top meaning that you don't actually have any center supports
and you can see right through it you will need to add some center supports and a sheet of plywood
over that because now instead of the aquarium relying on the perimeter of the tank to take
the weight it's now also going to rely on the bottom pane to take the weight. Position the
tank in place with the styrofoam on it and we can now move on to patching that crack.
We're going to patch it with another sheet of glass. Now that sheet of glass only actually
needs to be the size of the crack and allow it to overlap by a couple of inches. With enough silicone
simply place that new piece of glass over that crack. Now how thick should the glass be? Well I
like to use a minimum of six millimeter glass. I find that that is going to be the most durable
and the thinnest that you could use. Now let that cure for 24 hours and you're done. So how does this
even work? Well now that the bottom pane is fully supported the crack can no longer flex and pull
apart. With the top silicone and a new sheet of glass over top of it it can no longer leak. So
with that said this is completely safe and the tank is now good as new. If the tank does not
have a bottom brace and the bottom panel simply sits right on top of the aquarium stand then all
you really need to do is make sure that the aquarium will now be sitting on a piece of styrofoam the
entire tank. Then we can go ahead and move on to patching it like we did in the previous steps. Now
you can simply replace the whole bottom panel however it's much more expensive to do it that
way and way more labor intensive. You're going to have to take the entire tank apart to do so. The
end result for either method whether you're going to patch or replace are going to be the same.
Nobody's going to know because the substrate is going to be over it and both are going to hold
water. I prefer the patch because it's cheaper easier and just as good as replacing the panel.
Now what if a side panel or a front or back panel cracks? What can you do then? Well unfortunately
we need to replace that entire panel. The reason being is simple. Not only is it ugly and there's
no hiding it but it's not really going to last too long. The pressure being exerted onto an aquarium
is an outward force. That's going to cause those side panels front and back to bend and flex with
time. Now because you have a patch on there that's also going to bend and flex. Now unless you use
the exact same thickness of the aquarium you're looking at that crack getting worse and that patch
probably cracking as well. So with that said you might as well replace the entire panel. Now to
replace an entire panel you do have to take the entire aquarium apart. Old silicone and new silicone
don't stick well together. Now taking an aquarium apart is not that difficult. In my video on how
to build a corner aquarium I actually show how to take aquariums apart. So make sure you watch that
to find out how to do it. Now given the fact that you have to replace the entire panel the costs are
going to be higher than just a patch. Not to mention the labor that's going to go into it. So you might
want to consider those and compare it to what it might cost you to simply replace the whole aquarium.
Unfortunately sometimes that's simply just the best route. So in conclusion if a bottom panel
cracks don't worry about it the fix is relatively easy. However if a side or front or back panel
cracks well you're in for a lot more work. Anyways I hope you guys enjoyed the video. I definitely
want to thank you guys for watching and we'll see you next time. So here...
