STEM Catapult Those Darn Squirrels Part 2

Terrific Physics
40 followers
1 Video View·Sep 20, 2025
Hi, I'm Jared with Fun Science Demos. In a previous video, we highlighted a catapult design
that was inspired from this book, Those Darn Squirrels, by Adam Rubin, where a grumpy old man
gets frustrated with a group of squirrels because they keep trying to raid his bird feeders. And
those squirrels are quite ingenious. They design a catapult to get around the obstacles that the
old man builds, and they draw up some beautiful blueprints. And our catapult idea was pretty
ingenious too. Today, we're back with another catapult design idea. Now, in our other video,
we launched toilet paper tubes that look like squirrels. Today, we have to launch something
different. Today, we might be using a marshmallow. For materials, we're going to need two rulers,
a clothespin, a binder clip, maybe some tape and a rubber band, and then some kind of cup or
container that's used to hold our squirrels. To start our build, we're going to attach these two
rulers at one end using some tape and then a binder clip. We're going to zoom in so you can get
a better look at how that all happens. So we've zoomed in so you can see how we're going to do
this. We're going to line up the rulers so they're perfectly even, and then I'm going to take a piece
of tape, make sure it's firmly attached to that ruler, flip it over, keeping the rulers totally
even, and wrap tape on that side. Now, I also would like to run another piece of tape
on the inside, and be careful because you do need that extra
little bit of space so the rulers can fold into each other. Another piece of tape,
and now I'm ready for the binder clip. Squeeze a binder clip, center the rulers,
and I like to flip up the lever arms, and now I'm also going to run a rubber band around the binder
clip just to keep the rulers squared up. So I have one rubber band already secured around the lever
arms, now I'm going to secure another rubber band around the base of the binder clip or body of the
binder clip, just to make sure those rulers don't slip out the edge. And one more time,
and now when I try and pull these apart, I can feel the energy and the resistance that's going
to power my catapult. So now I need a wedge that would actually separate the arms of my catapult,
and for that I'm going to use a wooden clothespin. As the clothespin moves down my catapult,
the launch arms, it's going to squeeze that end and create a nice wedge. So here we go,
start at the outer edge, and I'm going to slide this down, and I want to try and keep it right in
the middle. So you can see, I might need to now come and push the clothespin in. I want to get it
back as far as I can. Now you can see my catapult really takes shape, and I need to tape this
clothespin in place with a few pieces of tape for the top and the bottom. So I have my clothespin
taped into place, top and bottom, and let's see how the catapult works. Yes, I have some energy
that can help launch my squirrel. Now I need to make a basket that's going to hold the squirrel.
I could use a small cup or a plastic cup, even a paper cup trimmed down for a little basket. I'm
going to need to cut some slots so that the cup can slide onto my catapult launch arm. So you can
see I just made some slits into this small cup, and the nice thing about this is I can slide the
cup into different locations on my launch arm to see how that impacts my squirrel when I launch it.
Does it impact the height of the launch or the distance of the launch? That's something cool we
can play around with. Now comes the fun part, inspired by the book, the launching. In the book,
the squirrel's first launch attempt did not go well. They ended up hitting a tree. Hopefully,
we can do better. Now this is where we get creative. We can make different things. Our
squirrels, we could use big marshmallows, small marshmallows, goldfish, candy, erasers. I even
found little fruit snacks that look like different animals. We're going to try launching them all
directly at the camera and see how they go. Now, as a true scientist would do, we could measure
our launches to see how effective they are. We can measure how long they go, how far they go out. We
can measure how high. We could even time how long they stay in the air. We can try adjusting our
catapult to see which part launches the furthest. Let's give these all a try. The big marshmallow.
Three, two, one, launch. Small marshmallow. We could try a whole bunch of small marshmallows
and launch squirrels. Let's try some goldfish. Let's put them all in. Fish fly. Hershey kisses
have a flat bottom. It launches really well. Rolo candies flat bottom. Yeah, that's good. Two Hershey
kisses. Even better. A handful of Skittles. Taste the rainbow. Some erasers. Good, good, good.
Seasonal erasers and then the fruit snacks. Oh, they launch great. The coolest part about this
catapult is not how well it launches, but how simple it is to make. Two rulers using a wedge
of a clothespin held together with some tape and a binder clip. Well, I could use different
materials that I have that are just as simple to make a different type of catapult. On this one,
you can see my clothespin in the center, but I used popsicle sticks held together with a binder
clip. For a little container, I used a bottle cap lid. Then I thought, what if we make this catapult
bigger? And instead of rulers, let's use meter sticks. Binder clip, meter sticks, but instead of
a clothespin for a wedge, I need something bigger to separate my catapult. So what if I used a roll
of tape? You can see the same principle in action. As I slide my tape down, I have pretty much the
same model as my smaller one. I'm going to have to hold that in place. And now I use the water
bottle, top part of a water bottle here. I can adjust it the same way and I have a bigger version
of the catapult. And I wonder, does this work as well as the smaller version? Well, let's give it a
try. Here's the marshmallow coming at you. Now, if you look carefully at my catapult, you'll notice
I used two meter sticks for the top launch arm. And that's the interesting part. I could try
stacking a third one or go back to one meter stick to see if I get a difference in how far
that launches my squirrel. All of these catapult ideas were inspired by the great book by Adam
Rubin, Those Darn Squirrels. If you want to learn more about forces in motion and other catapult
design ideas, check out our YouTube channel, Fun Science Demos. Science is so cool, especially when
I can supersize something and launch it into the air. Thanks for watching.
