Building the world's biggest RC AIRBUS A380-800, PART 1

Warship And Aircraft
72 followers
Hi everyone, I hope you're doing great.
So we're going for another big project.
This time it's going to be the Airbus A380-800.
I built this plane around 3 years ago with a wingspan of 13 feet, that is around 4 meters.
And that plane is actually amazing, she flies so good.
So this one is based on that exact model.
We scaled this one up to around 32 feet, which is a scale 1 to 8 from the full scale A380.
That's around 10 meters, which is the exact same size of the 777 we built.
So this one is going to be the same dimensions of the 777.
The A380 is obviously fatter than the 777, and also the wings have more wing area.
So it's going to look maybe bigger.
And so we are so excited to start this project.
So far we only have the fuselage ready.
We are going to go with the usual.
The whole plane is going to be machined out of EBS foam.
And we're gonna just rub it with carbon fiber.
Or this time we might go with just fiberglass on the outside skin.
And from the inside it's going to be reinforced with carbon fiber.
So in this video we're gonna be working on the fuselage.
Hopefully we will finish it at the end of this video.
Plus the vertical stabilizer as well.
All the stabilizers are going to be wrapped with carbon fiber.
Because obviously carbon fiber is much stronger than fiberglass.
But on the fuse, fiberglass I believe it's going to do the job just fine.
Plus we have a lot of fiberglass here in the shop that we never used.
Alright, I'm so excited to start this one.
So let's get to work.
Alright, look at this thing.
It is massive.
So this is the mid section of the fuselage.
It was machined in four pieces.
Because it's too big for our CNC as well.
So this section is fully glued together.
We're waiting for the glue.
We always use Gorilla glue on this.
It's the best to glue foam together.
It's really nice.
So tomorrow we will remove this tape.
Sand it, prepare it.
And for this one we're gonna wrap the outside first.
We still have those bulkheads.
These are going to be removed.
We put this in the machining to keep the fuselage from bending and changing shape.
So when it's wrapped from the outside, we can just go ahead and cut this flush.
And then wrap the inside.
And this is the nose.
We will put only carbon on the bottom side.
Then glue these halves together.
Then glue it on the fuselage.
And then wrap the whole thing as well.
We're gonna have this section and that section in one piece.
But the tail is going to be removable.
So we can still have access from the back.
And yeah, we only have now the fuselage ready.
The guys are still cutting the wings and the stabilizers.
Next week we will get the vertical stabilizers.
So we can also finish that and put it on the fuselage.
And that stabilizer is going to be 12 feet high.
So yeah, this thing is massive.
All right.
This video is sponsored by PCBWay.
PCBWay offers high quality custom PCB prototyping service.
They also offer CNC machining, sheet metal fabrication, injection molding, and more.
We use their CNC service on our custom aluminum landing gear.
You can simply upload your file and choose the material you want.
This time of the year, you can participate in their project design contest.
And win prizes up to $1,500.
Learn more at PCBWay.com
All right, this is looking amazing.
There are eight 40 millimeters carbon tubes in here to connect the tail.
This is 300 grams per square meter fiberglass.
We just put one layer.
Should be enough because we're going to wrap it from the inside.
And yeah, this is the nose.
We wrapped the bottom side of it with carbon from inside.
This is for the nose gear.
On the tail, we went full carbon inside.
We used 110 grams carbon fiber from the inside.
We wrapped the whole thing.
We need this to be strong.
And yeah, looking good so far.
We will wait for this layer to cure and then we flip it over and do the other half of it.
Did I mention that we are going to be cutting all the windows on the A380?
There is over 200 windows plus the cockpit windows.
That means we will need to make over 200 frames.
Surely we won't be making those frames by hand.
We got the Form 4L from Formlabs.
It's an MLSA printer.
This thing is a next level.
We will be using this machine on many other things, not just window frames.
But for now, I will be printing those for the A380.
Now, I am fairly new to resin printing.
I have some knowledge of it, but I don't have that much experience.
I got the Form 4L.
It's humongous.
I got the whole kit with this printer, the post-processing kit that includes the Formwash L,
the second generation, and the Form Pure L as well.
My first print was the cockpit window frames.
I made these using the Formlabs TUF 1500 resin.
Anyways, the print went fantastic.
Took the parts out and I wanted to put them in the Formwash.
Now, the Formwash L takes around 40 liters of IBA.
This is the cleaning solution.
But of course, because I am a newbie to this stuff, I bought just one liter.
Anyways, so I ordered more, but it will take a while for them to arrive.
So, I had to wash them by hand.
I mean, these parts are small.
But of course, when I print bigger parts, I'm gonna need a lot of cleaning solution.
Anyways, I cleaned them good enough.
Then, I put them in the FormQ for 50 minutes and the parts turned out amazing.
Then, I removed the support material.
Now, these are just the frames for the windows.
A while ago, I saw a video of somebody made a glass out of clear resin and it looked so good.
So, I thought, what if I can make even the windshields themselves also out of clear resin.
So, I got the clear V5 resin.
I tried sanding them, polishing them.
It did not work.
I don't know what I was doing wrong.
I mean, I was using this polishing compound for...
This is made for cars.
I don't know if that's the right thing.
But anyways, it did not work.
Like, the before and after results, the before were definitely better than after I tried to polish them and sand them.
So, that was a complete waste of time.
But I will use this clear resin for other things.
For example, lights and stuff like that.
The printer is going to be running for a while now because I need to print over 200.
And for the windshields themselves or the clear part of it, we will be using just like 1 or 2 mil thickness of acrylic.
Alright, so that's that.
This has been fun.
I think for us, it's a perfect tool to have.
And we will be using this thing a lot.
Alright.
Alright, we are done with the tail.
It looks amazing.
And here, I just put a layer of carbon just to reinforce this area from the outside too.
And here's the midsection.
It is also great.
Fiberglass is amazing.
Of course, we have to also wrap it from inside so it's sandwiched.
Of course, I chose the more difficult way to do this.
And that is by wrapping the inside after.
So, it's a bit tough for us to, you know, crawl in this thing and work in it.
But I did this for a reason.
The length of the fuse, if we wrap it from the inside, this means we will have to cut those foam bulkheads.
We had foam bulkheads in it to keep it in shape.
So, if we remove those foam bulkheads, wrap it from the inside first, we might risk the fuse to deform.
We will deal with it.
We will do the top after and maybe do the sides.
But it's gonna have a couple of bulkheads from inside so we might not need all that.
Next, we will finish it from the inside.
Then, we're gonna glue the nose on it, wrap it from the outside, and we will be almost done with this.
And after that, we will reinforce all that.
This has to be all connected to the inside skin so we will put carbon around all this here.
This bulkhead or the connection point needs to be the strongest on both sides.
And yeah, it's looking good so far.
Alright, we are done with the fuselage.
She is massive.
It looks great.
Super clean walk in here.
Everything is smooth so this will take barely any bondo, which is great.
And these are the windows. I just outlined them here. We will cut these after.
And this here is the connection point.
It's beautiful.
Zero joint.
Lovely.
We just put two bolts now.
This will take eight bolts around or we can maybe put six of them.
Super strong with this.
And so far, these are all the parts we have.
And the last piece we have of this that is already machined is the stabilizer and the rudder.
So we are going to work on that and install it on here.
And yeah, that will be it.
Alright, so next, stabilizers.
Alright, we are done with this.
Still fresh.
We put two layers of carbon fiber on that.
This is great.
Two 50mm aluminum tubes.
They are great.
Look how thick this thing is.
This is crazy.
We will wait for this to cure and then we can trim this straight and also wrap the inside of it as well.
See, it's also wrapped.
This thing is beautiful because it's foam so we had to put it this way so it doesn't bend.
So it is now perfectly straight.
Here is the rudder itself.
This thing is humongous.
So we wait for everything to cure, trim everything, and then we will assemble that there and put it on the plane.
I am very excited.
Alright, we are done with the fuselage.
Look at this thing.
This is crazy.
The fuse is amazing.
Like fiberglass, I wasn't expecting it to be that strong but I mean from inside it's full carbon.
I could sit on this thing, even walk on it without any bulkheads even.
The rudder hinge assembly, 12mm carbon tube going through four points in here.
The A380 rudder is actually a split rudder.
The upper half of it is actually disabled like mid-flight on high speed.
And I think on landings they have both operating.
I believe Airbus split the rudder in half because of how big is this thing so to avoid stress when it's at high speed.
So I think we are going to do the same in here.
We are going to split this in half and put two servos in it and make it scale.
Because I mean there is no way that I can put one servo to operate this whole thing.
It is really massive.
It's like a whole wing.
Alright, that's it for this video.
I am so happy with this.
This is amazing.
So in the next video we are going to be making the wings.
Obviously they are humongous so they are going to need a couple of weeks.
And so next video is going to be the wings.
Make sure to subscribe and I will see you guys in the next one.
Bye bye.
