25' X 37' House Design in Sketchup for Beginners

Decor Design 3D
20 followers
Sep 15, 2025
Hello everyone, I welcome you all to our YouTube channel.
Today I'm going to make an elevation for you all.
If you like the video, please like, share and subscribe to the channel.
Let's go to Sketchup and start making the elevation.
Now the welcome screen of Sketchup is open.
First of all, we will choose our template on which we want to work.
We want to work on feet and inches.
Either we will choose Simple Inches or IoT Textural Inches.
I will choose Simple Inches.
Now first of all, we will set our units.
We will go to Window.
We will go to Model Info.
Now our units are set.
Now we will go to Camera.
Now we will do Parallel Projection.
Now we will go to Top View.
Now we will start making this elevation.
First of all, we will take this Tape Measuring Tool.
We will apply guidelines on it.
And then we will make a file on it.
Now let's see our plan.
From here to here, its length is 37.
From here it is 25 feet.
And from here to here it is 37.
Now we will make its outer walls of 99 inches.
Enter.
Now from here to here it is 7 feet.
We will take 7 feet from here.
And our inner wall is also 9 inches.
We will take 9 inches.
And from here to here it is 10 feet.
We will take 10.
No, from here to here it is 9 feet.
We will take 9 feet.
And our inner wall is 4.5 inches.
Now our wide gallery is 4 feet 9 inches.
We will write 4 feet 9 inches.
And its inner wall is 4.5 inches.
And this bedroom is 8 feet from here to here.
We will write 8 feet.
And its inner wall is 4.5 inches.
Now this is the dimension tool.
Let's check our dimension.
Let's check it once.
It is 4 feet 9 inches.
And from here we will check it.
It is 8 feet.
From here we will check it.
It is 10 feet.
And we took it of 8 feet.
It is 9 feet.
This is also our dimension.
We have to work only on elevation.
So our elevation will be visible from front.
We don't have to make anything in the back.
We will just make a wall.
And we will work on the front walls.
Now I am taking this rectangle tool.
With its help I will make a rectangle.
I will make walls.
Now let's make this door.
Let's make this door.
The size of the door is not given.
Let's check the size of the door first.
These are the sizes of the door.
We will take the biggest size of the door.
Because it is in the entrance.
So this is D1, 3 feet 6 inches.
So we will make this door.
I will take this tape, this tool.
With its help I will make a guideline.
I will leave 6 inches from here.
And then I will take 3 feet 3 inches.
Now I will make a rectangle with the help of this tool.
Then I will take this eraser.
With its help I will erase it.
We got the space of our door.
Now I will push pull it.
Now I will make a group of it.
I will double click it.
And make group.
And I will make a slab below it.
And I will push and pull it 4 inches.
4 inches, enter.
I will also make a group of this slab.
Triple click.
Make group.
Done.
I will select both of them.
I will press ctrl.
I will take move command.
With its help I will copy it.
I will press ctrl.
It will be copied.
I will keep it here.
And it is done.
We don't need the wall above.
I will minus this wall.
I will go to group.
And I will minus this wall.
Now I will go.
I will come out of this group.
I will go to this group.
First I will hide this slab.
Hide.
Now I have to make this one.
So I will put a line here.
First I will go to this group.
Double click it.
Till we don't go to group.
We can't copy.
So I will go to this group.
Double click it.
I will take line tool.
I will put a line here.
And I will make it 5 feet below.
I will take push pull.
I will make it 5 feet.
Enter.
5 feet.
Enter.
Now I will put offset here.
I will put 1 inch offset.
1 feet.
It is more than this.
So I will put a line.
Like this.
I will erase it.
I will take select tool.
With the help of this line I will select.
And I will take move tool.
With the help of this I will move it.
It is 7 inches.
Then I will move it again.
I will press ctrl.
I will give 1 inch space.
Then I will move it again.
I will copy it by pressing ctrl.
On 7th feet.
Then I will copy it again.
1 inch.
1.
1 inch.
Enter.
I will copy it again.
By pressing ctrl.
On 7th feet.
7 inches.
Enter.
I will press ctrl.
1 inch.
Enter.
I will copy it again.
On 7th feet.
7 inches.
I will copy it again.
By pressing ctrl.
1 inch.
This is our crate.
Now we have to make this one.
For this what I will do.
Now I will take this tape measure tool.
With the help of this.
I will.
I will take 12th feet.
And I will put a line here.
And I will do it.
Push and pull.
By pressing ctrl.
I will give ctrl.
Push and pull.
I will erase this line.
I will put a line here.
I will take this.
This is the gap.
I took 5 from here.
And I will take 5.
20. 20 feet up.
I took it.
And 20.
Feet.
And from here.
I will take this tape measure tool.
9.
Inch.
And here.
I will put a line.
And now.
3 feet.
Enter.
And.
From here.
2 feet.
Enter.
I will make a rectangle here.
Now I will make these lines.
I will take this.
Fletch tool.
By pressing ctrl.
I will copy it.
This move tool.
By pressing ctrl.
7.
Enter.
By pressing ctrl.
1 inch.
Enter.
By pressing ctrl.
1 inch.
Enter.
By pressing ctrl.
7 inch.
Enter.
By pressing ctrl.
1 inch.
Enter.
By pressing ctrl.
7.
Enter.
press ctrl and enter 1 inch press ctrl and enter 7
we have made this much
press ctrl and enter 7
press ctrl and enter
we will take this line till here
now select tool
press ctrl and enter
we will select this line
press ctrl and enter
then move
press ctrl and enter
now we have created this line
now we will exit this group
and the height of the floor, we will bring it back, go to edit, unhide, all, now this slab which we have made the outer part, this is 9 inch, on this slab, we will go inside the slab, put a line here and push pull it inside,
first I will hide, first I will put a guideline, how much guideline I will put here, and I will put hide, hide, here I will put a line,
first I will go inside the slab, double click, here I will put a line, and we have to make it 9 inch inside, 9, 9 inch, enter, and I will make a rectangle on it,
from here to here, and I will make it minus, and I will bring it back, I will come out of group, go to edit, unhide, all, this is ours, and we will copy this slab up,
I will take the move tool, I took the move tool, I clicked, I will click, I will do move, I will press ctrl and copy up, I will put it here, here, it is done,
it is done, and now we will make this balcony, what we will do to make it, I will go to this slab group, I will double click it, and it is looking a little outward,
so I will push pull it, 5, 5 inch, 5 inch, enter, it came out, now I will put this tool here, 5, no, 9 inch, enter,
and I will make a rectangle on it, 9 inch, and I will press pull it, 3 feet, enter, it came out, now I will take this tool in the tape, from here I will take 1 feet, enter,
and I will make a rectangle on it, and I will press pull it, and I will take this tool in the tape, this 9 inch, 4 inch, from here I will take 3 feet, 4 inch, enter, 3 feet, 4 inch,
now I will put a line here, with the help of the line, and I will push pull it, I will do this, 4, feet, enter, ok, 4, no, ok, and now I will put a line here,
with the help of the line, I will put a line here, with the help of the line, I will put a line here, with the help of the line, and I will push pull it, it is up to here, and I will take it, and this glass rail will come over it,
I will take this offset and I will give it 4 inch enter I will take this line tool I will
it
we do not need it
we erase these
we can delete the guidelines
delete, delete guidelines
right so and we will check out of this group and this is the remaining part
let's make it
first I will put it inside this group
I will erase this line
and I will use this rectangle tool
I will make it
and I will press pull
10 feet
enter
and
I will put
guideline
9
8
9
enter
and I will put line
and
line
I will put
push pull
this much
I will push pull
6
inch enter
control press
6 feet
6 inches
I will do this
control press
6 inches
and I will
push pull forward
6 inch
enter
and this is little out
I will do this 1 inch
control press
I will erase this line
I will do this
1
feet enter
I took this 6 first
6 enter
this is done
and this is
this white part
is visible
I will go back
here
I will do this
push pull
control press
6
inch enter
and I will take this
back side
from this
and I will erase this line
on this
something is made
I will make that
I will take this
tape measure tool
center
and from here
I will take this
from here
I will take this
from here
I will take this
2
feet
enter
and 2 feet
from here
enter
I will take this
rectangle tool
and I will
push pull forward
3 feet
enter
if we see
the view
this much is visible
2
push pull
1 feet
back
1 feet enter
1 feet
enter
from this side
this is done
I will make
this
I will make
this
I will take this
from here
this much
and
this much
I will measure
this much
8
I will take this tape measure tool
from here
8 enter
from top
I will take this much
from top
6 inch
enter
this much
1
feet enter
I will make rectangle
sorry
I am in group
sorry
I will go to group
to come out
go to group
I will make rectangle
rectangle
push pull inside
minus
inside
2 rod
I will make
glass
I will take this
tape tool
in center
center
and from here
I will take
9
3 feet
enter
from here
3 feet enter
now
in center
I will put a line
from here
I will put
9
now I will take
select tool
select
move tool
control
press
1 inch here
2 inch
here
middle line
erase
push pull
from top
ok
here
select tool
move tool
control press
1 inch
2 inch
1 or 2
middle line
erase
push pull
from top
put
glass
from here
2
now I will make
paracord ball
from all guidelines
erase
go to edit
and delete guides
now I will make
I will take
this tape measure tool
this is
8 feet
and I will take
rectangle tool
make rectangle
push pull
9 inch
1 inch
8
9 inch
tape measure tool
9 inch
enter
rectangle tool
press pull
from here
I will take
tape measure tool
9 inch
enter
rectangle tool
make rectangle
press pull
from here
here
make group
now
if we see
this ball is inside
so we will
go to group
and I will take
tape measure tool
I will take
5 feet
enter
and I will put line
and I will press pull
from inside
this ball
is till this door
this is also
till this door
I will put door
I will complete modeling
I have made everything
now I will
put material
to put material
I will go to
window, default tray
show tray
and here is materials
it will open
now
from here
this is pattern
I will go to
pattern
patterns
and from here
I will choose a pattern
I will choose this
and go to group
go to group
and
I have put pattern
this is brown color
go to color
colors
I will choose a color
I will choose
this
and
I will put this
and this is yellow color
I will choose yellow
I will put this
here
I will put line
and
like this
I can see
and here
I will go to group
and
this is done
this is yellow color
I will go to group
I will put this
here
this is done
complete
now I will put door, window
and main gate
I will go to 3D warehouse
to put this
I will write door
I will take this door
yes
I will put this
I will turn on
3D x-ray mode
and
I will scale this
I will put center point
from here
I will put center point
this is fix
I will copy this
I will take move tool
I will press ctrl
it will be copied
I will put fix
now I will take window
I will go to 3D warehouse
and I will write window
I will take this window
yes
I will rotate this
at 90 degree angle
I will rotate this
and I will put move
I will put fix
now
I will turn on x-ray mode
and
scale
I will take center point
and
this is center point
I will put fix
this is fix
and
I will put this
I will press ctrl
and copy
this is window
I will go to 3D warehouse
and I will take
main gate
main
gate
I will take this main gate
yes
I will go to group
I will double click
I will delete
I want this
out of group
I will move this
I will put fix
and
I will turn on x-ray mode
and this is scale
I will take center point
from here
I will take center point
to reduce height
move tool
out of x-ray mode
inside
this is main gate
and
I will take glass rail
go to 3D warehouse
here
rail
I will take this
I will rotate
at 90 degree angle
move tool
I will put this
I will scale
to reduce height
center
point
move tool
now we will make final
we have made everything
now
this is little bit
out of group
I will go to group
I will
push pull
1
inch
enter
1
inch
enter
now
ready
now
material
I will convert
material
in vray
asset editor
go to
click
paint bucket tool
alt press
it will choose
this is our
right click
rename
this is our color
name
01
underscore
yellow
color
now
go to
convert
in vray
increase reflection
and
reduce glossiness
and
what was
color
press
paint bucket tool
alt press
we did not give any color
white color
we will
make white color
go to
material
generic
go to generic
right click
rename
I will give
02
underscore
white color
white
color
done
go to
white color
white paint
go to reflection
color reflection
reduce glossiness
white paint
we did not
white paint
do it
go to group
paint bucket
white color
white
go to group
white
color
out of group
go to
white
paint bucket tool
white
go to group
paint bucket tool
press
alt
right click
rename
03
underscore
red
or
maroon
color
enter
we will
convert
in vray
reflection
reduce
glossiness
our material
converted in vray
check all
material
check
white
press
pick white
pick
color
white
go to group
medium
view
converted
in vray
close
view
set
render
view
set
render
se
see
just
look
ok we will do rtx now we will take out the render
i will take out the render
in render the glass is not showing so we will add the glass material
we will go to the group
and we will take the glass material
and the torch is not showing
so we will add the metal material
we will take the metal material
we will click on it
we will add the metal material
we will add the glass material
and we will add the metal material
as i told you in vray setting we will convert it
now i have to take out the render
we will check the render again
glass is showing
it will take some time to render
now our render is complete
you can see
if you like the video then like, share and subscribe
and try to make this elevation
i will meet you again with a new elevation
till then bye and thank you for watching this video
