How to make a Ceramic Lidded Jar

Artistic ceramics
10 followers
1 Video View·Sep 13, 2025
Sharing my process of making a Lidded Jar as a closed form. We will cover throwing, trimming, and pulling & attaching a loop to hold a spoon.
Today we're going to be making a lidded jar as a closed form on the pottery wheel.
If you have no clue what I'm talking about, don't worry.
I'm going to walk you through the whole process.
And if you like pottery content, please subscribe.
It really helps my channel.
All right, let's get started.
Now we're going to make the lidded jar on the pottery wheel.
There's a few different ways to make lidded jars, but I'm going to show you how to do
it as a closed form.
And a closed form is just a sealed off piece of pottery that's hollow on the inside.
And then later we're going to cut off the lid so that it'll be like a perfect match.
Let's get started.
So you can make whatever size jar you want.
I'm going to make a smaller jar.
It's going to be about this big.
And I just have 12 ounces of clay here, and I'm going to throw it down and get started.
All right, so I'm going to center my pot.
Just pulling up and down.
This will also get the air bubbles out, hopefully.
That's pretty good.
I've got my side bucket, which I throw all the messy slop in.
This is going to keep my water thin, much more clean.
And then I'll use this later as slip.
All right, time to open it up.
Leaving a decent bottom there.
Not too thin.
Compressing my bottom.
Pulling towards me.
Okay, now it's time to pull up the walls.
I'm going to pull the walls pretty high, and it's going to be higher than the finished
piece because you'll see we're going to cone in and close it off.
So the first top portion will be the lid.
So I'm going to pull extra tall to account for that.
Going in for another pull.
I love these jars.
I keep them out in my kitchen because they look so cute and they're functional.
But yeah, you can put whatever you want in them.
This one's going to be a sugar jar, but you could put spices or salt, anything that you
access a lot in the kitchen.
I'm going to put a little foot on the side.
This is my tool from Garrity.
It's just a flat side and then a little curve.
You'll see it makes a really cute little foot.
If you don't have that tool, this wooden rib works great as well.
And I still use it just to clean up the sides.
All right, we got all that out of the way.
Now it's time to close the form.
So we're going to be coning it in.
I'm going to use the inside of my thumb and pointer finger on both hands and very slowly
bring it in.
I'm going to get my hands wet.
You really don't want to rush this move.
Take time or else it'll get all wonky.
So little by little.
And I'm going to start about one third-ish of the way down and close it in.
Little by little, we're going to make our way in.
This is your last chance to get any moisture out of the bottom of the pot.
We don't want to have sitting water in there.
So I'm going to use my sponge on a stick.
If you don't have a fancy one like this, it's totally fine.
You can just cut off a section of a round sponge and use a rubber band and put it on
the end of a stick like a chopstick or something like that.
Okay, now I'm just going to use my fingers as I'm getting in closer.
Kind of pretending to pull up the sides.
It's okay if it's a little uneven.
We'll clean it up and make it look nice.
Almost there.
Okay, I'm going to close this off and I'm going to actually pull off the excess clay.
Perfect.
And then I like to kind of come in and taper the knob so it has like a more defined shape.
I'm going to call that good for now.
You can take as much time as you need to shape the knob to your perfect ideal shape.
Some of them come fast.
Some of them just need a little extra love.
Now we're going to go ahead and wire it off and I'm going to set this aside to dry.
It's going to dry to the leather hard phase and that's when we are going to want to trim
it and we will also attach a little loop on the side which we can put a spoon in.
All right, Nacho, should we tell them what we're going to do next?
I want to do a little loop on the side of the sugar dish so that I can put a wooden
spoon to scoop it out with.
Here's the wooden spoon I have.
You can get these at like craft stores.
There's a few different shapes and sizes, but I think this one's going to be perfect
for what I need it for.
So this is going to be similar to pulling mug handles.
I have water and a little ball of clay and I kind of shape it into a little rounded triangle.
This top I can hold with my hand and then get ready to pull with the other.
So dipping into my water, pulling down on the clay, and I'm going to make these loops
thinner than you would a mug handle because the spoon is so small and dainty so I don't
want like a really thick little holder.
I want it to be like thinner than a mug handle.
All right, it pulled off.
That's fine.
So now I'm going to use this bat and just put my little loops on here to dry.
I always make extras just so I can pick and choose my favorite.
So I'm just doing like a little rainbow shape.
I feel like I'm doing tiny pottery.
How did a hair get in there, Nacho?
Another loop.
I'm going to let these dry to leather hard and then when it's time to trim the jar, we
will attach those at the same time.
All right, it's time to trim now.
I'm going to be using my Giffin grip today to help me out.
So I'm going to put my shortest little feet in there.
Okay.
And then here is our form which we are going to trim.
I'm going to get that nice and snug.
The first thing we're going to do is we're going to cut off the lid.
So we're going to use our pin tool and let's get started.
I have this hand here ready to catch the lid.
You want to make sure you stay very controlled and in the same spot so that we get a nice
clean cut.
And you'll hear once the seal breaks, there'll be a little bit of like a pop and then you
know you've cut all the way around and you can pull up the lid.
It's getting there.
I feel it.
All right.
Now it's off.
I'm just going to clean it up a little bit.
I'm going to use a smaller trimming tool and just gently trim around the top here and get
off those crusties.
Holding it down with my other hand so it's stable.
And I'm not going that fast because I'm just lightly holding this down.
You want to make sure you don't trim off too much because we still want the lid to fit
right.
A little bit on the outside.
That's all right.
Pretty good.
And then just a lightly damp sponge is good to just clean it up.
Okay.
That's good.
I'm going to set that aside for now.
Now I'm going to trim the interior a little bit.
Same thing.
Just getting off kind of the rough spots.
Gently holding it down so it's stable.
And then I'll do the outside too.
Clean it up with your sponge.
Okay.
Still fits right?
Sometimes I'll push it back down to just like get it comfy.
All right.
And then I'm going to do a quick trim on the bottom.
Dump out whatever's in there.
Okay.
Flip it over.
I'm just going to do a flat bottom.
No fancy foot or anything.
My wider trimming tool makes this part go really fast.
Beautiful.
And then just with my smaller tool, a quick clean.
I already have kind of a nice foot design.
I'm just going to get off the rough bits.
Gorgeous.
I use my fingers a lot just to smooth too.
Okay.
Time to stamp my initials on the bottom so you know that I made it.
Take it out.
Put it back together.
And you might have to like spin it around to find out like how it wants to sit.
Okay.
So now we're going to attach our little loop, which is going to be the holder for our little
wooden spoon that's going to sit in the side of the sugar dish.
So we have these little loops that we've pulled.
So I'm going to pick which one I think will be best.
I think I like this one.
So put it on the side here.
See how it looks.
I'm going to cut off a bit.
That's way too big.
My little knife tool.
Just guessing.
I think that's going to be great.
We're going to score and slip.
So I've got my little score tool here and a rough up this side and then also where it's
going to sit.
So about here and here.
Now we bring our giant bucket of slip and I'm just going to scoop off a little bit.
I don't want the super wet stuff, like a little bit more firm.
Good.
This is our glue that's going to keep it all together and then I'll pop it on.
I'll do a quick test with my little spoon to make sure that it fits.
And then just remember it is going to shrink about 11 or 12%.
So I think I should still have plenty of room for this.
Okay.
Now it's time to just blend and clean this up so it's nice and smooth and secure.
Just have my little wooden blending tool to help me out.
Same as you would a mug handle.
And then I'm just going to use a damp brush to clean it all up.
Then of course, once we get the glaze on this, you won't even be able to see the seam at
all.
It'll be pretty, pretty flawless.
All right.
Now this will dry out.
It will get bisque fired, glazed and fired for the second time.
And then I will show you the finished result.
And here we have our finished lidded jar.
Here's what the lid looks like.
And then I have a little place on the side to put our spoon and you can fill it with
whatever you want.
I'm going to fill mine with sugar.
And then while I'm at it, I'm just going to make a cup of coffee, add some sugar, delicious.
Thanks so much for hanging out today and watching my video.
The next step in the process is glazing.
If you want to learn more about that, I have a really great video right here.
And don't forget to hit that subscribe button.
