How to make a Locking Jar out of clay

Ceramic Art Studio
35 followers
1 Video View·Dec 15, 2025
This video was sponsored by Squarespace.
The Canadian throwdown is happening in just a couple weeks,
but we got to clear something up first.
Remember this fail?
This was a major design flaw in this project,
like everything that can go wrong will go wrong.
I had totally failed at making a locking box in the last pot along,
so I want to make that right before we move on to the new series.
But this time we're going to do one better
because I'm getting inspiration from the amazing ceramic artist Andrew Clark,
and I'm going to try and make a locking box similar to the work that he does.
Andrew is a freaking pro and I am absolutely not,
so I'm a little nervous.
Thrown in ages and I'm so...
I'm having so much fun right now.
This part always makes me super nervous
because you can't really screw it up.
I mean, if you screw it up, you're fucked.
You have to start over.
Okay, so I've thrown all my parts for the locking box.
I have like this part here is going to be the lid
and then this is going to be the knob that will be attached to the lid.
And then I don't know how he does this, Andrew,
because I couldn't find anything on Instagram
like explaining how these pieces are connected.
So I just threw a tube and the tube is going to be like the
axis that everything rotates on.
This is what I'm going to try.
We'll see if it works.
I'm just going to let these dry now and we'll get back to it tomorrow.
Okay, it's the next day and these have had a chance to dry out a little bit.
These are all fine.
This is still quite wet, this part right here.
Something that I didn't catch on camera last night
because I realized it right before bed and ran down to the studio
is that I needed to roll out some slabs.
So I rolled out a one centimeter slab and a half centimeter slab.
I don't know exactly which thickness I'm going to need,
so I just rolled out both.
I'm hoping we can get to the mechanism today.
Okay, so I have everything trimmed as I need it to be for like done for now.
I'm like quite pleased with the shape of this pot.
It's reminding me a lot of like a classic honey jar like a
like Winnie the Pooh would have.
So I'm thinking the first step is to get this lid to sit inside here.
Now, as you can see, it's way too big right now.
And I threw it intentionally too wide because this works best
if there's a little notch cut in to the side of the jar
so that the lid can only fit into the jar in one way.
I think I'm just gonna cut the notch out.
We've come to the end of my plan.
Like, let me show you.
Literally, this is all of the sketches I did.
Like, I don't even, I have no idea what I'm doing here.
So I'm just gonna try and take it step by step.
So let's just, let's just, let's just cut.
Okay, there's our notch.
And then now we need to cut out our lid to fit perfectly in there on the loose end butt.
This is obviously too long.
That's the easy part.
I'm just gonna make it as nice as I possibly can.
Okay, next, in order to lock the box,
like, there needs to be something on the inside of the pot for it to catch on.
The way that Andrew did it is there was like these little tabs that are on the inside of here.
What I did wrong when I was throwing is I should have just made this flange,
like, ridiculously long.
And then I could cut out, like, similar to what I did here.
And then I could cut off the extra.
But now because I didn't do that, I actually have to add on more clay to make those tabs.
But that is what it is.
This was the wrong way to do this.
We're just gonna go with it.
Okay, that doesn't look so bad.
But if you're going to do this, definitely throw your flange longer
so you can just cut out the tabs and not have to add them.
So Andrew Clark, he had actual tabs.
I'm wondering if I can get away with just this straight line here
instead of having it go back into the rest of the flange.
I don't know if that's gonna mess up the mechanism,
but I'm gonna leave it like this for now.
And then we can see if it gets in the way and I need to cut it back.
Because I just like how this looks better.
I think that looks nice.
Okay, I gotta run to a meeting.
But that gives us a chance to let this firm up.
So be back in a minute.
Let's take a little break to talk about today's sponsor, Squarespace.
If you've never heard about Squarespace before,
they're a website that you can go to
to create your very own professional looking website.
I've personally been using Squarespace ever since I started my online business
and I'm still using them for my website today.
There's a few things that I love about Squarespace,
one of which is their online shop
where you can sell physical or digital products,
just like I do with my printable pottery templates.
Two, I really love their blog feature
where you can make some really nice looking blogs
featuring text, photos or video.
I personally use the blog feature to create a space on my website
for all of my video tutorials.
And three, did you know that they also have an in-person POS system?
That's a point of sale system.
You're not just limited to selling online,
but you can also sell through your website IRL.
So head to squarespace.com right now for a free trial
and when you're ready to launch,
go to squarespace.com slash pottery to the people
for 10% off your very first website or domain.
Now let's get back to the video.
Okay, now I'm understanding why he cut these tabs
because this is the label thing.
It's going to sit right in here.
It's going to be level.
Theoretically, I think level with the flange.
It's say it says open here and closed here.
So like one thing here, one thing here.
This can't move.
It needs to have space here to turn just enough.
So like this needs to be cut and this needs to be cut.
Let's just do it.
This will sit below, should be attached something like that.
This is such a mind ****.
I'm really confused.
I am like, I don't want to start attaching things together
because I like I'm so unconfident in myself,
but the only real way to test this
is to start connecting things together.
I think I'm just going to, I'm just going to very quickly
and loosely attach all these together, see if it works.
And then I could always take them apart again if I need to.
Look at this crazy thing here.
So closed, open.
Oh, ----.
That totally works.
Just take a moment to tidy this up
because I'm now confused about the next step.
If you guys could see the inside of my brain right now,
though, I would be, you'd be afraid.
I think this is, this is the thing that I like most
about Andrew Clarke's work is, I mean,
besides the fact that it's insane what he does,
the way that he makes clay look like metal
or like traditional mechanical shapes
and like he adds rivets to his mugs
and corrugated iron looking like things.
You know, I don't know.
I've never seen that before.
I think that it's just super creative
and just like the contracts of clay,
which is this goopy organic material.
It's really hard to get clay to do stuff like that,
which is why he's just like such a pro.
I guess I need to cut a hole in this.
This is way more than I need.
I probably only need about a centimeter of space here,
but I think what I'm going to start with
is just trimming it back
so I can feed it through
and then we can figure out the right height.
As far as I understand,
the knob is not actually going to be attached to the lid.
It's like fed through the lid.
I just hope it's not going to be like really rattly
because of that.
Okay, so this is getting exciting.
This totally works.
I mean, I'm like blindly turning it right now,
but how cool?
I don't know what to do for the hole.
Like I've got this smiley face stamp
that will be kind of cool,
but I don't have a frowny face.
So I also kind of want to write nice dry on it somewhere,
but I don't know if I have room for that.
Why don't I just like make my own smiley faces
or at least like the frowny face.
Okay, now this is stuck.
How do I open this?
That's so cool.
This is exciting.
Okay, I'm going to let this dry like this.
I'm going to let this boy dry upside down.
I'm so pleased.
Like knock on ******* wood,
like seriously,
because how I've gotten this far,
I do not know,
but let's call it a day
and then tomorrow I'm going to come back
to add whatever details I want to add.
This is so freaking cool.
Good morning.
I am so happy with how this is looking.
Everything is drying well.
My turning lid here is functioning just fine.
At the moment,
I'm just trying to figure out
what sort of surface design I want to add to this
because I could leave it like this,
but I think it needs a little something.
I could add under glazes.
I've got these amical under glazes I could add
and then I'm also thinking I could add
like this black wash that Andrew Clark does
or should I carve
or I could even add glaze.
Like I can't glaze all the parts,
but I could glaze like,
for example,
the body and the knob.
Okay, here's what I've got.
I'm going to go with carving,
at least in the beginning,
I might add some color.
I've got my little amical sample set here.
I'm going to add a funny little message on top here.
So this is just a sample.
It's going to look neater.
It works sarcastically if you can't open it
and it works genuinely if you can.
One thing that I am going to steal from Andrew Clark
is he's got these little marks
that are made to look like rivets.
It's not as perfect as his thing,
but what I found that best replicates it
is this little electrical conductor thing.
It makes this cool imprint.
I think this is genuinely
one of the coolest things I've ever made.
This is just such a cool piece
and I'm really excited.
So I'm still going to add the black wash.
I need to do that after it's bisqued though.
So I'm going to bisque it now with the white
and that means I can go in with the black wash
and then wipe it back
without wiping back the white
because that will be bisqued into the clay.
No cracks.
We're good.
Our plan today is to coat this
with a underglaze wash.
So if I was inventing this project all by myself,
I would probably use like an iron oxide,
but this is what Andrew Clark used.
I don't know if he uses Amaco,
but he uses a black underglaze
to give his pots this kind of like dirty look
and I think it also adds like a lot of dimension.
So that's all we're going to do.
I just want this tone on tone kind of look
from black to white
and a little bit of tan in between.
No colors.
I think that will look really cool.
And we're going to make a wash.
So a wash is just diluted color
and I'm going to paint it on
and then I'm going to use a sponge
to remove it afterwards.
I'm using like three of these little spatula things
and then I'm going to add
just a little bit of water.
I'm going to mix it up.
Okay, I added about three more scoops
and that's better I think.
I don't know.
It's hard to say,
but we're going to do that.
Okay, now I'm just going to remove
the extra with a wet sponge.
I'm happy with that.
I really have no idea how it's going to turn out,
but I'm excited.
By the way, if you guys want to see something cool,
these are the next template collection.
We've got a coffee drip.
We've got some salt and pepper shakers
with the cutest little tray.
This might be my favorite one.
Citrus juicer.
A little food storage jar.
Super cute.
A sponge holder.
I think this is going to be the first one that I launch.
A little sponge holder.
Cute, right?
And then a butter dish,
but the butter dish was a little bit tricky
because butter comes in different shapes
and sizes all over the world.
So this is going to be the European size butter dish,
which is a bit more square.
And then I have the American size,
which is longer.
As far as I know, I'm going to take one of these.
I'm going to visit my family in the US in February.
I'm going to take one of these along
and measure it against their butter
because I actually don't know for sure,
but I'm going to double check.
So these are just the second prototypes.
I might change still a little bit,
but I'm getting really excited
with how these are turning out.
This is going to be the kitchen essentials collection.
I love them.
So my lockbox is ready to go
because I've added a lot of water to this.
I am going to let it dry out for a day
before I put it into the kiln.
You know, like if I was in a rush
or, you know, this wasn't such a precious object,
I might just risk it
and put it straight into the kiln
because the bisque is so porous,
even though I did add a lot of water,
there's a lot of opportunity
for the water to escape during the final fire.
Let's play it super, super safe
and let this piece fully dry out for 24 hours
before I put it into the kiln for the final fire.
I'm really excited.
It's like going to be two more days
before I can see this finished.
But for you guys, you get to see it right now.
So nervous.
I'm very anxious to open this kiln right now.
We're at 106.
I'm going to wait until it gets to 100.
I had an inexplicable explosion the other day,
so I'm hoping it's not going to explode
like that piece did.
And the problem is I don't know why it exploded
and I was worried because it's so cold outside
and I have to crack the window
that there was like a gust of wind
and too much cold air got into the kiln.
I don't actually know why that piece exploded,
so I'm worried it's going to happen to this piece.
I can at least take off some of these guys.
Take a minute, sneak a peek.
Oh, it's not exploded and I'm excited.
Aesthetically, beautiful.
Functionally, this is currently stuck
and I don't know if I can get it unstuck.
These little speckles in here, they're beautiful.
That's iron and sometimes they melt in a way
that would be like glazy, making things stick
and or it could be the underglaze
that is stickier than I anticipated.
Oh, all right, okay.
Hello, is this not the coolest thing ever?
And the sound is just...
Shall we do the moment of truth?
Open, close.
Oh, this is genuinely the coolest thing I've ever made.
Hello, like design, 10 out of 10.
I can only take a part of the credit for that
because I did copy a lot of Andrew Clark's style.
But look at this, the smiley face, 10 out of 10.
The nice try, 10 out of 10.
The functionality, they're a ******* 10.
Like I'm so inspired right now.
This is the coolest thing I've ever made.
Oh my God, okay.
The only question left is what am I gonna store in it?
Is this like a cookie jar?
I don't know, but I'm actually really shocked at myself.
I truly thought this project was gonna be a fail.
I did not anticipate this to be
one of the coolest things I've ever made.
That just goes to show how I think
we all just underestimate ourselves.
I think we all just see someone else's work
and it looks like this magical thing
that can only come from that artist.
And that is unattainable to us mortals.
But that's all I gotta say.
Thank you guys so much for watching.
If you want to see the original video
that I tried to make a locking box and I failed,
I'm going to link the whole playlist
for my last throwdown challenges up here.
Get ready because the next throwdown is going to start ASAP.
I don't know if it's gonna be the next video
or the next next video,
but it is going to start in mid-February.
Get ready.
There's gonna be a lot of cool challenges
and this makes me feel like they're possible.
Thanks for watching.
See you guys in the next video.
Bye, friends.
