⚡ Smart House Wiring & Home Automation Live Class “From Basic Wiring to Advance Level Smart Control Wiring – All in One Course” 📅 Start Date: 3rd September 🕗 Daily Time: 8:00 PM – 9:30 PM 💰 Fee: ₹2000 Only 🎥 Recording Validity: 4 Years 📖 Free Bonus: House Wiring PDF Notes
Are you an Electrician, Student, or Beginner who wants to master House Wiring & Smart Home Automation step by step? Then this 34 Days Live Class is for you! 🚀
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
✅ What you will learn in this course:
• Switch Board, 2-Way, Godown, Bell & Buzzer Wiring • Energy Meter Wiring (Single Phase, Three Phase, CT Type) • MCB, MCCB, RCCB, SPD & VMR use, selection & wiring • Earthing, Ammeter-Voltmeter, Multimeter Practical • DB Wiring (Single & Three Phase) • Changeover Switch & Phase Changeover Wiring • Motion Sensor, Smart Switches, WiFi MCB, Mobile App Control • Ceiling Fan, One Room, and Complete House Wiring • Inverter Wiring, Battery Selection, Solar Panel Wiring • Water Pump, Submersible Pump Starter, Float Switch & Automation • 3-Phase Motor Testing, Timer Circuits, Auto Light ON/OFF Panel • Alexa Voice Control – Smart Home Integration 🌐
⚡ By the end of this live training, you will be able to do Complete House Wiring + Smart Automation Projects with confidence.
🎯 Why Join this Class? ✔️ Step-by-step practical training ✔️ Live doubt-solving with instructor ✔️ Learn both basic to advanced wiring ✔️ Job & business growth opportunities in the electrical field
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
📅 Course Duration: 34 Days (Daily Live Class) 💻 Mode: Online Live Class 📖 Language: Hindi + Simple English 💰 Fee: Affordable for every learner
In this video, you will learn how to do the wiring of a remote controlled switchboard and how to ON and OFF Light Fan By using a Remote watch the video to know more about it
1. Suitable for Use in Household, Offices, Shops, Restaurants, Hospitals, Hotels & more. 2. This Unique Remote also helps in controlling the speed of a fan. 3. System saves unnecessary cost of 2 Way wiring and 2 way switches. 4. Spark proof & contactless switching Increases switch life. 5. Operate through remote control as well as from your existing board manually.
Buy This Remort Controlled Switch Board From Amazone Carolight Remote Controlled Switcher for 4 lights and 1 Fan https://amzn.to/3cWOXEU
queries Solved 1. remote control switch board for home 2. remote control switch board wiring 3. remote control switch board circuit diagram 4. remote control switch board fitting 5. smart switch board wiring #remotecontrolonoffswitch #switchboard #switchconnection #wiring electrical Technician
Friends, in this video, I'm going to give you an explanation on how to wire the switch board which is operated by the remote.
This switch board can be operated by this remote.
As you can see, I have the first light. If I want to turn it on, I can turn it on and off with the help of this button.
I can turn on the second light by just pressing this button on the remote.
I can also turn it off with the help of this button.
I'm turning on the third light, and this switch is pressed to start the switch and if I want to turn it off, I turn it off and on.
I can switch the 4th light on and off with this button.
The motor is controlled by this button.
The remote has F1 button.
Press this button to start the fan.
The fan speed is 4.0.
To control the speed,
Press this button to control the speed.
The speed is decreasing.
Pressing the number 1 button will decrease the speed.
In this way, we can control the fan speed.
To stop the fan, press this button.
To start the fan, press this button.
To stop the fan, press this button.
Let's understand how to wire the switch board.
There is a controller on the back of the switch board.
There are two switches and two sockets.
This is the remote control switch board.
Only the light and fan can be controlled by the remote.
The power socket is the same as the one in your house.
You can turn it on and off with this button.
It is written P and N.
P and N means Power Input.
You have to provide power supply.
Where will you get power supply?
The incoming power supply that comes to the switch board.
For example, I will get incoming power supply through these two wires.
I will connect the incoming power supply to the face neutral.
The controller will start.
Let's understand how to get the output.
Before that, let's connect it properly.
The first way to connect is to provide power supply to the switch and socket.
In this power socket, the right-hand side pin is for face supply.
You have to provide face supply.
When will the face supply go?
When you turn on the switch.
The incoming power supply always goes to the switch.
I have looped a wire below the switch.
You have to provide face supply to both the switches.
I have already looped the wire to save time.
I will connect this wire to this wire.
Face supply will come from this wire.
I have to provide face supply to the controller.
I will connect a wire to the incoming power supply.
The power supply will go to the controller to provide face supply.
The incoming power supply should go to P.
I will cut it.
You have to provide face supply to the P terminal.
The controller has received face supply.
The switch has received face supply.
When you turn on the switch, the power supply should go to the socket.
Take a wire from the output terminal of the switch to the right-hand side pin of the socket.
This is the right-hand side pin.
We have to provide face supply to this pin.
I have connected a wire to this pin for face supply.
Similarly, when you turn on the switch, the power supply should go to this socket.
Take a wire from the output terminal of the switch to the right-hand side pin of the socket.
Face supply should go to the P terminal.
The controller also needs neutral supply.
I will connect a wire to the incoming power supply for neutral supply.
I will connect a wire to the incoming power supply.
I will provide neutral supply to this socket.
I will connect a wire to the incoming power supply for neutral supply.
The controller is turned on.
I will turn off the switch.
I will connect a bulb to this socket.
When I turn on the switch, the bulb light will turn on.
The socket is working.
We have to connect earthing to this socket.
When you wire properly, you can connect earthing to this socket.
I will connect earthing to this socket.
You have to connect earthing to the thick pin of the socket.
We have to turn off all the bulbs and fans from this controller.
Before that, I would like to tell you that a live class is going to start from 10th September.
Smart House Wiring and Home Automation.
The Smart House Wiring class will start from 10th September.
The time is 8.30 am to 9.30 pm.
The date is wrong. It is 10th September.
The daily classes will run from 8.30 am to 9.30 pm.
These classes will run for a total of 35 days.
I have given the details of all the classes in this PDF.
The starting classes will be a little basic.
If you go to the advanced section, you will see how to connect a ceiling fan.
How to do complete house wiring.
If you want to do three-phase house wiring, how to do it?
How to connect an inverter?
How to wire a solar panel?
How to connect a multi-speed cooler?
How to connect a single-speed cooler?
How to use a floor switch?
How to wire a floor switch?
If you have two energy meters and only one pump,
that is, there should be noise in two different houses,
how to connect one solar panel?
How to make an automatic panel that turns off the light?
I am going to teach you all these things through this live class.
If you want to join this live class,
I have provided a link in the description of this video.
You can join directly through that link.
Or you can contact me on WhatsApp.
You can take the link of the course directly.
You can join through it.
Or you can pay directly on the QR code and join the class.
If you miss your live class for some reason,
there is no problem.
You will get the recording of the whole class in our app.
Which is available on the Play Store under the name of Electrical Technician.
You will have to open this app.
After opening this app, log in.
After logging in, you will go to the Pad course.
Here you will see our Smart House Wiring course.
When you make a payment, there will be no option to make a payment here.
Here you will click.
After clicking, you will click on the content here.
Now you will see that I have already uploaded two demo classes.
And after this, all the classes that are going to happen here will come here.
You will see that a free PDF book is written here.
If you click on it, a PDF book is given here for free.
I am going to provide you this PDF book for free.
You can read it and make your knowledge stronger.
In addition to this, we are also going to provide you a certificate here.
Your certificate will look something like this.
Where your name, your father's name.
When did you take the class?
When did you get the certificate?
Plus, the certificate number will be given to you by mentioning it.
By using this, you can make your resume stronger.
I have given the link to join the class in the description of the video.
If you have any other problem, then this is my WhatsApp number.
You can contact me on this.
Now let's come to the topic.
Let's assume that this bulb is the first light that we have to turn on.
To turn it on, the phase supply should go through the L1 terminal of this controller.
I connect this wire to the L1 terminal here.
I have three more lights at the moment.
Let's assume that the orange light is the second light.
We have to connect the second light to L2.
The L2 terminal is here, so I connected it to it.
Let's assume that this light is the third light.
Let's connect it to L3.
In the same way, the fourth light will be connected to L4.
I connected it to the fourth terminal.
All these lights need a neutral supply.
I connect all of them together.
We have to connect all of them to one neutral point.
You can make a joint here, but it is wrong to do so.
Connect it to a switch board.
There are two switches here, I will connect it to this.
The neutral supply will also go from this place.
I open this and connect it to the switch board.
We have connected all these lights.
Now we just have to connect the motor.
connect the motor and we will also get two wires in the motor
because the capacitor is already connected
so what we will do is, we will take the face wire from these two
and we will connect it to the fan point
we will connect it to the fan point
I will bring it to this side
and I will connect this wire to the fan point
now we just have to connect the neutral wire
of this fan
so what we will do to connect this
let's see where the neutral point is empty
there are so many wires here, so it will be wrong to connect it here
so here you will see there are two wires here, so I can connect it here
so I will loosen it a little and with this
I will also connect this neutral wire
what do electricians do, they tape the wire at one place
and connect only one wire, you can do that too
but that is the wrong way, the connection is not proper
so we always request you to connect it to the socket
but if there is more wire, you will have to do that
if there is less wire, you can directly connect it to the socket
this is the connection
I have already shown the socket testing
now we just have to test this controller
so at this time, when you press this switch, the first light, second light
third light and fourth light is on
and to turn on the fan, I will press this button
if I want to turn it off, I can turn it off with this
if I want to turn it off all at once, I will press this button
now let's check one by one
L1, L2, L3, L4
all four lights are on, now I have to turn on the fan
I will press F1, fan is on
and I will turn it off, then I will turn it on
I will control the speed, it is running at 4, I reduced it to 2
like this the speed is changing
now I want to turn it off all at once
I will press the red button, then it will turn off
if I want to turn it on all at once, I will press the green button
then it will automatically turn on
so I hope that if you have a remote controller like this
then you will be able to wire it easily
friends, I want to tell you
if you want to join our house wiring class
then I have given the link in the video description
the class will start from 10 September
which will run till 35th
daily from 8 to 9 pm
I have given the link of the class in the video description, join from there
if you have any problem apart from this, you can contact on this whatsapp number
see you in the next video, thank you very much for watching this video