Bespoke Shoemaking With Dominic Casey

Men & Heritage Crafts
139 followers
1 Video View·Sep 4, 2025
Bespoke shoemaker Dominic Casey talks about the craft and heritage of bespoke shoemaking, while showing how even the welts and threads of his shoes are entirely handmade.
There's something ritualistic about opening the workshop in the morning, turning the lights
on, opening the doors, getting the tools ready.
It connects you to my lifetime spent working as a bespoke shoemaker and the lifetime of
all the shoemakers who have gone before me.
My name is Dominic Casey and I've been making bespoke shoes totally by hand for nearly 40
years.
All of the tools that I have are second hand.
They've been used by many shoemakers before me and I feel a great connection through the
trade and through the history of bespoke shoemaking.
Just every time I pick up a tool and realise that it's been used by many shoemakers before
me and hopefully will be used by many shoemakers after me.
The workshop was made in a very specific way.
It was designed as a bespoke shoemaker's workshop.
So all of the benches are set at a certain height for standing and working at which allows
me to cut the patterns on them, make the uppers etc etc.
And then underneath I have the shoemaking bench.
The door's open and it's lit underneath there and that provides me with a small seat in
which I can actually sit down and make the shoes.
Traditionally shoemakers have all sat in very small seats.
This old and battered seat that I sit in is a family heirloom.
It was originally made by my grandfather for my grandmother.
The reason we sit on small seats is that it makes it easier for us to actually work with
the work in our laps and it makes it easier when we actually get to stitch the welts in
and stitch the soles on to actually hold the work in place in our laps with a leather strap.
And that makes it more comfortable for us to spend long hours sitting down in these small seats.
A bespoke pair of shoes takes about 40 hours to make and the majority of the work is done
totally by hand.
In fact the only machine that I use is the sewing machine and I use this to sew together
different parts of the leather to form the upper.
Otherwise everything else is done in this workshop including carving the last by hand.
Like many shoemakers before me I hold the nails in my mouth and I guess this is where
the expression spitting nails comes from.
I'm sure there's many shoemakers just like me who's hit his thumb or cut his finger as
he's working and has spat out a few nails in frustration.
In bespoke shoemaking even the threads are made by hand and in many ways they epitomise
the bespoke shoemaking process.
Different aspects of the shoemaking process require us to make threads of different weights
and when I say weights what I actually mean is strands of linen.
So the welt may be 8 or perhaps 10 strands of thread.
The soles may be 3, 4.
So the heavier threads tend to be for sewing in the welts.
If you're making riding boots you might be using really heavy threads of perhaps 12 strands
of linen.
If you're doing lighter ladies work you may be down to 8 or 6 strands of linen to sew
the welts in.
These threads are made the same way by me as they have been by other shoemakers for
over hundreds of years.
In the late 1980s I was sent to a wonderful Polish shoemaker who had been working for
lobs for well over 40 years to learn shoemaking.
I always used to ask him how long each thread I needed to make should be because I never
knew when I was learning I never knew how long to make a sole thread, how long to make
a welted thread.
And he'd always just say to me in his wonderful broken Polish just make them the length of
the kitchen.
So whenever anybody asks me now all I usually say is when they say how long should a thread
be I always say just the length of the kitchen.
So I'm still trying to make threads the length of the kitchen 40 years later.
And again what it does is it connects you to the history of the people that have taught
you and you realise that all you're doing is just holding the legacy of shoemaking until
you can actually pass it on to somebody else.
So in a way that's what makes teaching shoemaking so important.
Because you realise that you're passing on the skills that you've kindly learnt from
somebody else to the next generation of shoemakers.
The threads are simply made.
Strands of linen.
Twisted.
Waxed.
And then some kind of needle or bristle attached to them.
The twisting gives the strands strength.
The wax generally gives the threads some waterproof structure and also helps bind the threads
and the twists together.
And then the needles or the bristles allow you to pass the threads through the holes
that you're going to make in the leather with your awl.
The welt, which is a strip of leather, is used to connect all the pieces of the shoe together.
This is really the backbone of a hand-welted bespoke pair of shoes and one of the most
defining characteristics that differentiates a bespoke pair of shoes from a factory-made
pair of shoes.
The simple act of making a welt contains many of the skills that a shoemaker would need
to learn in controlling knives.
You've got straight cuts.
You've got skived cuts at different angles.
You've got ploughing cuts.
So even in this simple strip of leather, there's any number of cuts involved and any number
of different hand skills involved in just making the simplest of pieces.
There we go.
Nothing has changed in this process since I was taught it by a Polish shoemaker over
40 years ago.
He had learnt it as a boy when he had come over to England after the war and had gone
to Lobs and learnt to become a shoemaker.
In this way, you feel yourself really connected to a generation of shoemakers beforehand.
He had learnt it from somebody else beforehand at Lobs and so all of this is just passing
down a legacy of shoemaking.
