小雛菊花藝學校ep45|大吉大利永生花春節花禮.能伴你度過一整年春夏秋冬的永生桌花

FLOWER Gift
79 followers
Welcome to Xiao Chu Ju Flower Arts School.
I'm the florist, Wu Ni Yan.
The Lunar New Year is coming soon.
Today we are going to teach you how to make a flower garland for the Lunar New Year.
In the past few years, we have taught you how to make a flower garland.
Today we are going to teach you how to make a flower garland for the Lunar New Year.
Even if the Lunar New Year is over, it is still a beautiful decoration to put in your home.
The first step is to prepare a dry flower sponge.
The difference between a dry flower sponge and a flower sponge is that the density is higher.
If we use a flower sponge, it will be easier to loosen.
If we use a dry flower sponge, it will be easier to loosen.
This is a wooden scraper we found today.
We are going to put the sponge into this hole.
We are going to cut along this circle.
Okay, we will cut off the excess.
Now we are going to put some grey grass here.
How do we put the black grass?
We will make the wire into a U shape.
As you can see, it is a U shape.
We will put the wire into the hole.
We don't need to put a lot of wire.
We just need to put a little bit of wire around the hole.
This is a water-diluted grass.
The purpose of water-diluted grass is to cover the dry flower sponge.
It will have a more beautiful effect.
Let's move on to the next step.
For the second step, we are going to prepare a small spring face.
It has a lucky lucky on it.
We are going to put it in the middle of the wood.
We need to decide the front of the wood.
We will use this as the front.
We will put the lucky lucky on here.
We will use the hot glue gun.
If you don't have a hot glue gun,
you can use double-sided tape.
We just need to squeeze a little bit.
We will put it in the middle of the wood.
We will stick it.
We will fix it.
We have put a spring face on the wood.
For today's main flower,
we choose a red rose.
This red rose is not a normal red color.
Because I expect that this work
is a little bit festive.
But we didn't choose this kind of
normal red color.
Because I want it to have a low-key feeling.
It is festive,
but it is not very eye-catching.
Even if the Spring Festival is over,
I put it in a small corner of the house.
It is still a beautiful decoration.
It is not very eye-catching,
but it is a beautiful existence.
So I choose a red rose.
It is a little bit of purple.
It is not a normal red color.
First of all, we need to make the flower.
You can see that the whole flower
will look like this.
This kind of flower does not have a flower stem.
So we need to make the artificial flower stem
We prepare the wire number 24.
We cut it in half first.
Because we don't need a very long flower stem today.
Okay, let's cut it diagonally first.
Now we thread the wire.
We thread the wire
in the place where the flower stem is closer to the top.
Then thread it in.
Okay, thread it in the middle.
Push down.
Okay, let's turn a little bit.
Another one.
Also thread it in like this.
Okay, thread it in the middle.
Push down.
Okay, next,
we use the floral tape
to wrap the wire.
We need to pull the floral tape
to make it sticky.
Then we start wrapping from the top.
Then we have to remember
that our left hand is responsible for turning the flower.
The right hand is responsible for pulling the floral tape.
So we have to pull it.
Pull it.
Okay, that's it.
Okay, next step.
We want the flower to be bigger.
So we make a small step first.
We cut the stem in half.
Okay, like this.
Okay, then we use the hot glue gun to open the flower.
Lightly tap on each flower.
Okay.
Fix it to the flower.
Okay, so the first piece is opened.
Okay, now the outermost layer,
we follow this principle.
Lightly tap on each flower.
Okay.
Open the petals.
Lightly tap on the inner side of the flower.
Okay, so now the first layer is opened.
You will find that it is different from the unopened flower.
Okay, let's open the second layer.
How to open the second layer?
I will tap on each right side.
Lightly tap on the inner side.
Then I put my hand in like this.
Hold it like this.
Hold it lightly like this.
Let it make a small knot at the bottom.
Just lightly like this.
Okay.
We don't deliberately do this press action.
We just let it open naturally.
Okay, the next piece is the same.
We also lightly tap on the right side of the outermost layer.
Lightly tap on the inner side.
Then slightly open it.
Okay.
Lightly tap on the inner side.
Open it and slightly open it.
Lightly touch it like this.
Okay, we also follow this principle.
Slowly open each layer.
Just lightly touch it.
Don't need to open it too much.
Then the opening of your flower will affect
how deep your hand goes in.
If you don't want the opening of your flower to be too big,
you can raise your hand a little bit.
You don't need to go deep.
Okay, now we slowly open it piece by piece.
Okay, after we open it,
we slightly smooth the inside.
If you are worried about using your hand to smooth it,
it will break.
You can also use a cotton swab.
Then we slightly open the door.
If you think it's not wide enough,
you can continue to open it.
Okay, then we can do it like this.
You can compare it.
The size of the flower we put in the box
and the size of the flower we opened
are actually different.
The one we put in the box did not bloom at all.
The one we opened will bloom a lot more.
Okay, then we are going to put on
our first flower today.
For our first main flower,
we will put on our rose first.
Put it on the left front of our work.
Okay, then our first flower will be put here.
For the second one,
I want to put a small pine nut next to it.
Okay, for the pine nut,
it doesn't have a place to put it,
so we use No. 24 iron wire.
Then wrap it around the small gap of the pine nut.
Then wrap it around and turn it around.
Then cut it with a scissor.
Okay, let's see where the pine nut should be inserted.
Okay, we put the pine nut here.
Then we have prepared a Japanese small fan.
I expect to put the small fan at the back.
The back right of our work.
Next, let's take a look at the leaves.
For the leaves, we want to pull two lines at the back.
We pull two leaves first.
Then we also make some small leaves at the bottom.
Okay, so there will be two leaves and two small leaves here.
Long and short on a diagonal line.
Okay, next we have the embroidered ball flower.
How do we make the embroidered ball flower?
We just grab it like this.
Use the same iron wire.
We fold the iron wire in short.
Then grab it like this,
bend it around three times.
Then use the same floral tape,
to make a flower stem for your iron wire.
Okay, then just tear it off.
We cut off the extra flower stem.
Okay, for the embroidered ball flower,
we insert it at the back of the work.
It has some holes.
Okay, we just insert one ball at the back.
Like this.
Then,
we insert the other ball at the front.
Here.
To fill in the gaps.
Okay, next,
we want to put
two
lemon slices next to it.
For the lemon slices,
we also need to make some iron wire.
We stab it from the edge of its flesh.
After stabbing it,
we hold the iron wire and flesh.
Then start spinning.
Spin it in a circle.
Okay, after spinning it in a circle,
just cut it off.
Like this.
Okay, I want these two to be
one left and one right.
We insert one piece at the side.
For this piece,
I want it to be
under the rose.
So I will go to this angle.
Actually, iron wire can be folded.
So I can insert it first.
Then adjust the direction of your lemon slices.
They can be adjusted.
Okay, let it be under the rose.
Okay, like this.
It is under the rose.
Next,
we prepare three
red gold balls.
For the gold balls,
we let it be embellished
in this piece.
Maybe there is an empty space here.
We just fill in one.
Under the rose.
We can also fill in one here.
Okay, we can also fill in one here.
Okay, if the gold balls are too short,
we can also make iron wire.
Make it longer.
So that it can show its head.
Okay, our work is almost done.
Finally, we hang this
purple
like a Chinese-style
little flower.
Where do we hang it?
We just gently hang it on your
Eau de Cihalier, like this.
Okay, we're done with our work.
This is the episode
of our design of the spring flower gift.
I call it
Daji Dali Spring Flower Gift.
Why is it called Daji Dali?
Because we chose a
auspicious auspicious auspicious auspicious
auspicious auspicious auspicious auspicious auspicious auspicious
as the decoration for the Spring Festival Gala.
I also put some fruits like lemon slices
to make it look more abundant.
I think this work is full of joy
and a flowery gift for the Spring Festival Gala.
But after the Spring Festival Gala,
it won't be very eye-catching.
You won't think that it can only appear during the Spring Festival Gala.
After the Spring Festival Gala,
you can put it next to your desk,
on the bedside,
or next to your bed.
You will still think that it is a beautiful decoration.
So we chose a red color,
not a bright red color like a fan.
We chose a low-key red rose
to be our main flower.
I hope you like this work,
which is full of joy and a flowery gift for the Spring Festival Gala.
That's all for today.
I wish you all a happy Spring Festival Gala.
If you have any questions,
please leave a comment below.
I will reply to you all.
I am the florist, Annie Wu.
I look forward to meeting you.
Thank you for watching.
