小雛菊花藝學校ep33|古典花型教學.赫加斯花型盆花.展現S型曲線之美

FLOWER Gift
79 followers
Comments are disabled for this video.
Welcome to the Xiao Chu Ju Art School.
I'm the painter, Wu Ni Yan.
Today, we are going to share with you
the teaching of classical flower patterns.
The classical flower pattern we are going to teach today is
the classical Hexagonal Flower Pattern, Penhua.
Next, we will introduce the flower pattern.
The classical Hexagonal Flower Pattern originates from the flower pattern
The Hexagonal Flower Pattern is also known as the S Pattern.
In the 18th century, in the era of Rococo,
the famous British painter,
the penthouse painter,
the classical phoenix painter,
William Hogarth
published an art book in 1753,
The Analysis of Beauty.
In his analysis of beauty,
he proposed the aesthetic line of beauty.
He said that the S-shaped curve is the foundation of beauty.
Later, it was called the Hexagonal Curve.
The key point of the classical Hexagonal Flower Pattern is
1. The flower pattern is S-shaped.
2. The upper curve and the lower curve have the same starting point.
3. The center point of the S-shape is recommended to use a quick-shaped or face-shaped flower.
4. It is recommended to use a flower with a high degree of flower.
5. Leave some space for the lower curve.
Next, we will introduce the flower pattern.
First, we will prepare a flower with a high degree of flower.
This is a tall champion cup.
Next, we will burn the sponge.
First, we will burn half of the sponge.
Half of the sponge has a line.
We will cut along this line.
Now, we have small, medium, large, and three equal parts of sponge.
This flower is from narrow to wide.
So we have to put a narrow sponge first,
which is the lowest part.
First, we will cut the long sponge into a square.
Like this.
We will put it at the bottom of the cup.
Next, we will look at the second part.
We will also cut the second part into a square.
Now, it is obvious that we can't put it down.
Because we are cutting inward,
we will cut the curve inward.
First, we will burn the four corners.
After burning the four corners, we will put it down.
Now, it is just right to put it in.
Next, we will lower the level of the second part.
We will lower the height of the two fingers.
Put it back.
Next, we will put the largest part.
It is obvious that we can't put it down.
So we will burn the four corners at the bottom.
Put it down.
If we still can't put it down,
we will burn the four sides.
Put it down again.
If we still can't put it down,
we will continue to burn the four corners.
So we will repeat the four corners and four sides.
Put it down.
Next, we will put the sponge upright.
After putting it upright,
because if we move it directly like this,
it may roll out when I move it.
So we put it back.
Put it on a level surface.
Then we use this cotton swab.
Insert it from the middle.
Another oblique insertion.
The oblique insertion can't be so oblique.
We still have to match the oblique of the side.
So insert it obliquely.
Okay, that's it.
Let's try it now.
When we move it,
it won't roll out like this.
It's like you put three balls together.
Okay, next,
there are some corners here.
We will burn some sides.
We will burn the four sides.
After burning the four sides,
we will burn the four corners.
Okay, the sponge is done.
We can start to burn the flowers.
First, we insert the sea jade.
We choose a curved one from the sea jade.
If there is no curved one,
we try to shape it with the temperature of the hand.
We don't fold the shape.
We shape it with the temperature of the hand.
So we shape it a little bit.
Okay, we cut a new cut and insert it.
We expect that there will be a upper curve here.
There will be a lower curve here.
Okay, we insert the first upper curve.
Next, we insert the lower curve.
We shape it and insert it again.
Okay, now we have inserted the upper curve and the lower curve.
Next, we insert the oil-added leaves.
For the oil-added leaves,
we make a curve first.
For the curve of the oil-added leaves,
we just fold it like this.
Remember not to break it.
Okay, we insert it in the upper curve.
Okay, now the oil-added leaves
have deepened the upper curve.
For the lower curve,
we also insert an oil-added leaf
to deepen the lower curve.
In the same way,
we curve the oil-added leaves a little bit.
Next, we insert an ocean jade
in this position
to deepen the curve of the upper curve.
If the ocean jade is not curved enough,
remember to shape it and insert it again.
Okay, let's show it to everyone.
There is an ocean jade in the upper curve.
Next, we insert the champagne rose.
For the champagne rose,
we insert the center point of the upper curve
and the lower curve first.
So remember to use
a larger area of the rose
to insert the lower curve.
Okay, remember to insert the opposite side.
This is the front side.
Now I will insert the back side.
We use the lower curve method.
Okay, let's show the back side.
We also insert two.
Okay, next,
we let it follow the upper curve
and insert a champagne rose.
Okay, follow the lower curve
and also insert a champagne rose.
Okay, we also insert the same on the back side.
Okay, for the champagne rose,
we don't have this area in the middle yet.
So we insert some in the middle area.
This is the front side in the middle,
and this is the back side in the middle.
We don't curve the middle part,
so we also insert a few.
We use the lower curve method
because we want to keep the curve here.
Okay, for the middle part,
we also insert one in this direction.
Okay, for the side part,
we also use the lower curve method.
Next, we will insert the big conical star.
We find the gap to insert.
As long as you pay attention,
you must use the lower curve method
When you insert the middle position,
you must use the lower curve method
for the center point.
Okay, so we insert two in the front side.
We also insert one in the side part,
where it goes down.
Okay.
Then we insert another one
that goes along the upper curve.
Okay, we are done with the front side.
Okay, the same position,
we also insert it on the back side.
Now we are done with the back side
of the big conical star.
Next,
for the next flower,
we will insert this.
Hermes mini rose.
For the mini rose,
we can use it as a single flower,
a single flower,
and a bunch of flowers.
Single flower, single flower,
we can put it in the lower position,
as a embellishment in this work.
There is no rule
where you must insert it.
Just spread it evenly
in your work.
But it must match the S shape.
Okay, remember to insert it in the middle.
Okay, we are done with the front side.
We will insert it on the back side.
Okay, for now, we will fill it up like this.
If it is not enough,
we will fill it up later.
Next,
under the base of this flower shape,
we are almost done with the flower shape.
Now we will fill the leaves.
The leaves we prepared today
are the small sea buckthorn leaves
and the small round-leaved oil-pressed chestnut leaves.
For the filling,
there is no special rule
on how to fill it up.
In principle, we just find a gap to fill it up.
The basis of filling is
to maintain the shape of the S shape.
In addition to the oil-pressed chestnut leaves,
we also start to fill the small sea buckthorn leaves.
Let the two leaves
intersect in all the gaps.
Why don't we just choose one type of leaves?
We have to choose two types of leaves.
Because I hope that
in this gap,
the leaves with different textures
will intersect.
It will look richer
and not monotonous.
Only the small sea buckthorn leaves
will intersect with two types of leaves.
And the small sea buckthorn leaves
is a type of leaves that I like very much.
Because I think it is
light green with a little white.
Some are dark green.
It is a
colored leaf.
Let's fix the front first.
After the front is finished,
we will fill the back.
Now the front is finished.
Let's fill the back.
In the same way,
the small sea buckthorn leaves
intersect with the small oil-pressed chestnut leaves.
Remember to fill the side.
Because sometimes
in the process of filling the front,
after filling, we just turn the back.
We will miss the side.
So we also need to check the side.
After filling the small oil-pressed chestnut leaves on the back,
we will fill the small sea buckthorn leaves.
Our work is finished.
You can take a look.
This is the classical Hegazi flower pattern.
There is a curved line above
and a curved line below.
You can imagine
that its flower pattern is like
there is a C above
ABC
and there is a C
in the other direction below.
Or you can imagine
that there is a circle above.
We only use this part.
Below,
there is also a circle here.
The center point is here.
The curved line of the circle is here.
So it is a S-shape
with a curved line above
and a curved line below.
So this is the classical Hegazi flower pattern.
What is the point of the flower pattern?
I usually suggest that
this curved line below
and this curved line above
are the flowers with a curved line.
For example,
the sea buckthorn
or the small sea buckthorn leaves.
In this way,
the shape of the curved line above
and the curved line below
will be more obvious.
The point in the middle
is to insert the lower part.
Because if you insert it too high,
you can't see the S-shape.
So this is the point of the flower pattern.
The color I chose today
is a yellow-orange color.
It looks warm.
This is the theme of today's tutorial,
the classical Hegazi flower pattern.
We will share more classical flower patterns.
If you are interested,
you can continue to follow our channel.
If you have any questions,
you are welcome to leave a message to me.
I will reply to you one by one.
I am the florist, Annie Wu.
I look forward to every meeting with you.
Thank you.
