D’s overhauled supersonic rev the finished product

The Precision of Crossbowry
1 follower
Aug 31, 2025
D’s overhauled supersonic rev the finished product
We are getting there now.
Right, Jamie.
You want me to show you how to fit this?
That's all you're going to need to do.
Look at the difference between that.
That bit off there.
Put that on there.
Just pop that in there.
Put the spacer back in.
Pop that screw back in, but not very tight.
Not at all.
And then...
Bend that round.
Quite stiff, but it goes.
Pop that screw back in there.
Bend that round.
Quite stiff.
Okay.
One thing I do need to just do is...
Put some grease on there.
Now for the string.
Not very stiff on that brand new.
Right.
Last time.
Pop that in there.
They look a little more meaningful, don't they?
I still haven't seen any wear on mine yet.
That's that bit.
Your press needs a little bit of attention, doesn't it?
I'll just free that up a little bit.
I'll have to file a little bit over that.
I missed it.
There she be.
Nice.
Pop that in there.
Now what do we need?
A stock.
Might just be helpful.
Pop that in there.
Might be helpful if I didn't keep dropping screws.
That's it. There we go.
And one last little touch.
Pop that in there.
There.
First time, as you just saw.
Spun that.
And cocked for the very first time.
And de-cocked.
And cocked.
And de-cocked.
So.
Now what do we need?
Might just be helpful.
And de-cocked.
Does it shoot?
Time to find out.
First shot.
269.2.
That's kind of going backwards.
So after that first goo, or first boo goo.
I actually found when I strung it up that that fell out into the bin.
So it was pulling over one way.
Obviously not as much tension as we'd like on one side.
And I also had to take the cog and mechanism out.
And clean that up, because that was grating a bit.
It's cocking nice and smooth now.
I feel a bit more tension as well.
280.7.
That's a bit better.
And it's a much more reliable 280 as well.
It's got a lovely sound to it.
Very nice.
Shoot a few targets now, and then we're all done.
I forgot to say, I also swapped these around.
So instead of the small one being at the back going through the loop.
I got the bigger one at the back.
Which has shortened the cables slightly.
I'll have to make them a little bit shorter.
Because obviously you can't adjust them.
I might actually make a shorter set.
I'd like to get that cam a little bit more level with the limb.
That was another thing I forgot to mention.
Trying out some new grippy washers.
Hopefully stop them bolts coming undone.
But they're very expensive.
It cost me over a tenner to put those eight in there.
Another lever.
Have a look at that target.
Definitely got some tension on that then.
Is this thing ok?
That has got some go in it.
That sounds beautiful.
Come on!
That's literally hitting that target.
While I'm still here on the bow.
Oh jeez.
I'm not going to be happy with that.
That's a cool finish.
Superb.
So.
That's your bow.
That's your extra set of string and cables if you want that.
Your bag of rather mean broadheads.
And all of your bolts.
Which are pretty damn good by the look of what we just put down there.
Let's go and have a look.
Not too bad at all.
So there we have it, number five.
In all her glory.
What a superb little crossbow.
Alright, I hope you've enjoyed that one.
Give us a thumbs up.
See you later.
Howdy.
Just going to do one more.
With these brutes.
Before I pack this up in its box.
And take it to the post office.
Ooh.
There's a rat.
Well there's a surprise.
Huh.
There's no messing about with this.
Just wind up the cans then.
I wasn't really expecting a rat to be sitting there.
Ooh.
Right in the eye.
Ooh.
I was aiming there.
That went a little left.
Reflect that one.
No, just a quick peek.
Out there.
I wasn't expecting him to be out.
