In this video, we take you behind the scenes of the Textile Conservation Studio to see how museum mounting professionals Lauren and Hannah mount and display an original 18th-century robe à la française (also known as a sack-back dress). Experience each step of the textile mounting process — from preparing the mannequin with conservation-safe materials, to supporting delicate fabrics – all ensuring the long-term care of the garment.
This dress has an intriguing history – quite small in size, it was possibly made for a young adolescent or petite woman, and consists of a glimmering sunset-coloured shot silk. The material achieves a shimmering effect by using threads in different colours – a pink warp and a yellow weft.
Whether you're a costume historian, textile conservator, historical fashion enthusiast, or just interested in what goes on in our studios, this video gives you a unique insight into professional museum garment mounting.
Steps: 00:00 About the 18th-century dress 00:26 Materials – shot silk 00:47 Measuring and selecting a mannequin 01:42 Adding wadding 02:34 Petticoat & net layers for skirt 03:34 Levelling off the hem & adding top fabric 04:10 Unboxing the petticoat and fastening with gathering tapes 06:12 Interesting feature 06:30 Mounting the top dress 07:10 Fastening the bodice 07:52 Silhouette of the dress 08:29 Why is mounting important?
So here we have a sackback dress from the 18th century. It's about 240 years old
and today we're going to do a final fitting before it's ready for display. It's made of a shot silk
which means it's two different colours for the warp and the weft, a pink and a yellow.
Today I'm going to talk about the mounting process to take it from this flat dress you can see here
to the 3D figure that you'll see in the display. So this is the mount for the silk dress.
The first step for mounting is taking initial measurements of the object itself. We realised
quite early on that it's a very small dress, potentially a young adolescence or a teenager
and so we needed to find the smallest mannequin available. This is the figure that we used for
our silk dress. It's called a petite one. It's a papier-mâché bust form and it's been specially
developed for mounting historic objects. It's got a very flat front, quite a small bust,
a very narrow waist and quite a long torso. Our original wearer was quite short
and so we can change the height of the mannequin down the pole.
We added a wadding on the inside and a layer of rime over the top which created a soft but
solid foundation to start mounting. The waist was actually cut away so you can cut straight into this
waist which created an even smaller waist to start from. So we used this polyester wadding
in order to pad out the figure to the specific dimensions.
We also feathered the ends to create a smooth shape and then herringbone stitch across the top
to keep it in place. It didn't need a lot of wadding because the dress is very small and there
wasn't much bust either because the shape of the dress would have kept the front and the bust quite
flat. To create the soft fan shape of the skirt there were a few layers of underpinnings that
were created underneath. The first layer is a hoop petticoat which is narrower at the top than it is
at the bottom and has steel rings through each layer. Then there were various layers of net.
First of all a stiff net at the top to create the fan shape and also a stiff net layer at the bottom
to kick the hem out. Then a soft net layer here to create a soft shape and then a silk petticoat
on the top to consolidate all of the layers and to create a barrier between the net and the
petticoat. So the last steps will be to level off the hem of the underpinnings to make sure none of
it is visible underneath the dress and to add a top fabric which will be a black satin fabric
and will be a really nice finish underneath the dress. We'll only add it to this section here
which will extend just below the neckline so that we only need to use a small amount of
exhibition fabric and none of the rest of it will be seen underneath the dress. So this is the
petticoat, this is the first layer that we will dress onto the mannequin. You can see here it's a
rectangle and most of the shape is achieved using these gathering tapes at the top here which will
sides will be gathered in using these gathering tapes to achieve the fan shape of the skirt.
So this is the last fitting of the dress. The last step would be to just mark in a stitch line
where the hem of the dress ends. At this point you can see that the dressmakers have used a less
expensive fabric here to conserve the more expensive silk that you can see at the front.
cotton tape to keep the front closed whilst we check for the final fit. We'll find a ribbon or a
cotton tape that closely matches the dress to keep the bodice closed for the display.
To keep handling to a minimum I'm not going to close the centre front before display. The colour
of the dress is quite surprising, it's quite a vibrant colour so we affectionately call it the
sunset dress. You can really see here the narrow waist, the flat front and the fan shape of the dress.
You can also see the dramatic shape that the pleats create down the back of the train and also
how full the skirt is at the back. For a mounting point of view we've created all the supports
with the petticoats and the net underneath the dress that supports the top layer of the dress
but the pleats are dramatic all by themselves. So the importance of what we do is to create a mount
that fully supports an object whilst making it the exact shape and size of the original garment.
It's quite a fabulous shape and the fabric is so beautiful so it's going to look quite spectacular
on the display.