A Simple Edwardian Corset Cover

Edwardian Threads
5 followers
5 Video Views·Aug 27, 2025
In this video, I share my journey of creating another corset cover based on the pattern of my sleeve crinoline. From tackling fit issues to experimenting with thread buttons, I take you through the ups and downs of the creative process. Join me as I add a touch of personal flair to make this simple garment uniquely mine.
Materials Used:
- 1.2 m white poplin
- Aluminum rings
- Cotton sewing thread
- Silk sewing thread for the buttons
I really like the pattern of my sleeve cunniling of basically the corset cover which is based
on a pattern from 1907 and I also made a poll and asking you if you think I should make
it in black or in white and basically the answer was both.
So I decided to make the sleeve cunniling in black because it fits better under my cycling
sweaters but I also wanted to make a white version so I bought some white fabric and
have the pattern.
I just will make some little changes and see how this will turn out.
The first step was to shorten the pattern pieces to the desired length and also deepen
the neckline.
I did this with the paper pattern so that I could see if it was right.
Then I cut the fabric out.
The other day I overheard a conversation at my local fabric store and the customer and
the lady of the store were talking about how to cut fabric and how to cut straight lines
and she said that you shouldn't look where you're cutting but ahead where you want to
cut and I realized that I actually do that when I'm using this little tool here because
I look at the ruler and then cut to there and every time I don't use the ruler my lines
start to get wonky and I didn't figure out why.
Now I know so if that helps you, you're welcome.
Again I made sure to cut little triangles at the bottoms of the darts so that I have
enough material to fold them into the hem later on.
And I marked their position with tailor's chalk.
Then I cut the only really different pattern piece which is the sleeve.
It is much smaller than the previous one and basically a cap sleeve.
Switching the thread to a white one I started sewing.
Once again sewing the darts the wrong way around but hopefully the next time I will
make it the right way.
Lastly I sewed the facing to the front but before closing it I pressed the whole garment.
You know the drill, first to one side then to the other and lastly open.
But in this case mostly to the back so that I can finish the raw edge faster by hand since
the seam allowance are laying on top of each other.
Then I ironed the hem of the sleeves in place by folding it in by half a centimeter and
then a second time by also half a centimeter.
To make it easy to sew always at the same width.
Last night I was a tiny bit frustrated since I tried on this coset cover and it didn't
fit as well as the mock-up.
I was so annoyed by that because why do I make the mock-up if it doesn't fit afterwards.
So I took a moment to look at it and figure out what the problem is and I was able to
find it.
So this is the black version which is just a little bit longer but it has the same issues
basically.
It had way too much room in the front here.
This part is perfect.
Just here is way too much material and the reason is that somehow the darts ended up
to be half a centimeter too small.
That basically changed everything.
It was so two centimeters of fabric too much which looked really bad because I completely
lost the accentuation of the waist which I really like but it wasn't there anymore but
now it is back again and the other thing I remembered is that the darts in this case
they make these little pockets and with this version this isn't ironed yet but it's already
less pointy and less making these pockets and the reason is that I sewed the dart not
straight up like that but made an S-curve so that basically the points end up like this
and therefore the shape is accommodating the round of the bust and I remembered that from
my very first studies so thank you Hattie for showing us that back then.
After I had fixed my fit issues I sewed the hem of the sleeves and then sewed the sleeves
in.
This time there is no gathering at all so I have to make extra sure that the layers
lay flat without any folds.
And somehow sewing a sleeve with gatherings in feels way easier to me.
I cut the front into a nice point so that the lower layer won't show later on.
And I ironed the hem into shape.
The point was a little tricky but in the end it stayed in its place.
I switched to work on the tailor's hem since it felt easier to work on the rounding of
it especially in the area of the darts.
Sewing the points required a little slower work speed but for the rest it was now really
easy to sew the hem.
I checked if the points are equal and they weren't so I sewed one anew.
I think it was the back one.
Once they were even I then hemmed the neckline the same way just narrower and I was lazy
and didn't iron it.
Just pinned the hem in place.
And now to the thing that is a little bit extra as I said in my last video because well
this coset cover is quite simple.
You can add just a little lace at the neckline and the sleeves but other than that it's plain.
Well I'm me and I always want to try something new and this time I decided to make some buttons,
some thread buttons and therefore I bought this box of Automotive Aluminium Oil Drain
Plug Gasket Washers Assortment Set so basically this little aluminium ring and I will make
thread buttons.
They are not dorset buttons because dorset buttons are made with the thread wound around
the ring first and then made these longer threads which are crossing in the middle and
the thread buttons that were made on the continent where first the crossing threads
are made and then wound the thread around between each of those first made.
So that's the difference and I'm going to do the simplest one to try and to see if it's
fun if it looks good and that's how I will make my coset cover a little bit special.
But since I had my model machine up and running I used only the blanks for the sizing of the
button holes so that I can already sew them.
I figured that buttons around 1,5 cm might look the best so I distributed them evenly
and then marked each position with a pin.
The button holes were quickly sewn and also finished.
I created the buttons by winding three bundles of eight threads crossing in the middle securing
them there with a cross.
Then I wound the thread around the ring each time making two loops between one of the threads
of the bundle and this way this kind of wheel was created.
Once the thread was secured at the back I sewed the buttons to the corset cover since
I could use the same thread.
And since I decided that the corset cover was still too plain I then sewed some simple
lace to the neckline and the sleeve.
And here's the corset cover.
I really do love these buttons and even in combination with the lace it's plain and simple.
It makes a shape I really love on my body and I assume that I can use this pattern for
some other styles too.
So that's pretty cool.
Thanks for nudging me to make not one but two versions of this corset cover.
