HOW TO: build an aquarium rack - cheap and easy

Fish for Talks
2 followers
Hi everybody, Joey here again and welcome back.
So in today's video I'm going to show you guys how to build a cheap and easy aquarium
rack.
When it comes to smaller tanks, you can minimize the space that they take up by simply stacking
them on top of each other.
Now in the past I've actually shown how to build aquarium stands and multiple level aquarium
racks, but I haven't really done a video on how to build a rack for smaller aquariums.
If you haven't watched my video on how to build an aquarium stand, I definitely suggest
you do before attempting this project.
Now this rack that I'm about to show you is intended for aquariums 30 gallons or less.
With that said, we're actually going to use half the materials that we typically would
on an aquarium rack.
For this build I used 7 2x4s and about 120 wood screws that were number 8's 2 1⁄2 inch
long.
Using wood glue for this build is definitely optional, however if you do intend to use
it, it will make your stand a lot stronger.
The total cost for this entire project was under $25.
Now the plans for this aquarium rack are so simple that you can actually adjust how you
want to put it together.
I first start out by building the platforms that the actual aquariums are going to sit
on.
Now I make these about a half inch to one inch bigger than the bottom of the aquarium
just to give them a bit of wiggle room.
We just need to make sure that we screw the front and back on the outside of this formation.
Now I repeat this step for as many tanks as I need.
In this case I needed 3.
Now the way I typically put these together is I first sit these tank platforms up and
screw in the side supports in.
I use at least 4 screws for each contact point.
Now this is where wood glue can be used if you want to.
Now these side supports are actually going to depict the overall height of the entire
rack so you'll want to keep that in mind.
Now the spacing of the platforms for the tanks are also going to depict how much room is
in between each one.
You'll need to account for not only the aquarium but how much room you're going to
need to be able to work in between them.
I like to allow 4 inches minimum as a working space in between the tanks.
As you're putting this together your only real concern is going to be to make sure that
this is square and level.
So you're going to need both of those tools to ensure that happens.
Now obviously once that portion of the build is together we now have a makeshift stand.
However you'll notice that all the weight is now on the screws and we're going to want
to alleviate that a bit.
So a 2x4 cut to the width of the stand and placed under each aquarium platform will provide
ample strength and support for that.
Again 4 screws into each contact point.
Now even though we added those additional supports you'll notice that all of the weight
from the aquariums is still on the screws.
However we use so many screws that there's really nothing to worry about.
Now a wood screw on average has a shearing strength of about 100-150 pounds.
Now what that means is it will take 100-150 pounds to snap that screw in half.
Now based on the design of this rack each aquarium is supported by 32 screws.
Now the tanks that I'm using are 30 gallon aquariums and if you do the math this stand
is 10 times stronger than I actually need.
Now obviously this is a tall and narrow stand.
It's very evident that this might tip over and that's definitely a concern you should
have.
So one of the best things you can actually do is to secure the top of the rack to a wall.
Now that's not going to be a possible scenario for everybody so here's an idea that I use.
I cut some 2x4s to the width of the bottom of the stand plus an extra 6 inches.
I screw them in place to contact points on the legs and that will prevent the stand from
tipping forward.
Now the benefits to this type of rack is obvious.
It's cheap and it's easy to do.
It also takes up less space than my other stands typically do.
On that same note, this rack is rated for aquariums 30 gallons or less so it does have
its limits.
Anyways, I hope you guys enjoyed the video.
I definitely want to thank you for watching and we'll see you next time.
