2025 Hoyt Carbon RX9 First Look

Exploring Ancient Crossbows
3 followers
12 Video Views·Aug 26, 2025
2025 Hoyt Carbon RX9 First Look
Well we finally got our hands on the all-new Hoyt Carbon RX9. This is going to be their
flagship hunting bow for next year. It looks like they made a lot of improvements to this thing,
a whole bunch of things have changed. We're going to go over all them, we're going to speed test it,
shoot it down range. I'm going to give you guys my initial feedback and hopefully by the end of
this video it'll help you guys make a better informed decision whether or not you want to
buy this for the next hunting season. First thing you're going to notice on these new bows is going
to be the all-new cam system that Hoyt has come out with. So they've engineered these cams now
to have a module that is draw length specific, whereas before they had a module that swung or
pivoted on a couple screws where you can get a draw length adjustment from say 26 to 30 inches.
Well now you're going to get modules that are draw length specific in three quarters of an inch
draw length increments. Now what that's going to do is that's going to increase the efficiency and
the speeds of these bows tremendously. This bow for example, from its predecessor to this one,
I believe at 29 inches 70 pounds it's gaining about 19 feet per second, which is insane when
it comes to just tweaking the mods a little bit. So pretty cool on Hoyt for being able to come up
with that. I'm really excited to shoot this bow because I want to see if with that increased speed
that these cams are just as smooth as last year's bows because last year's bows the cams were really
nice to shoot. So if they're able to get those speeds plus still have a really smooth drawing cam
that's definitely a 10 out of 10 in my book. So with all our flagship hunting bows or any bows
for that matter they do have the pick sight mount on the front here so that's nice. Also has your
standard side mounts for your sight. It has the integrate dovetail option on the back here along
with your burr hole if you happen to choose a rest that mounts on the side of your bow. So all that's
still good. Now before we get any further into this bow let's go over all the specs so everybody's on
the same page. So this bow is the Carbon RX9 Ultra so it's the longer axle to axle bow. This happens
to be 33.5 inches axle to axle. It comes in at a 340 feet per second speed rating. It has a brace
height of 6 3 8 inches and it has a mass weight of 4.3 pounds. Like we already mentioned it has
the new HBX Gen 4 cam system and the draw length ranges from 26 inches to 31 inches depending on
which mod you use and the lead off goes from 75 80 and 85 percent on these cams. So it looks like
they've updated their shortstop. This is their shortstop 2.0. It's a little bit more narrow
more streamlined than the previous models. It has your threaded bushing on the front here for your
stabilizer. It doesn't have any bushings on the back for a back bar. You would need to buy the
Hoyt's side mount or side bracket system that attaches to this hole right here. It comes with
a pick mount system so that's pretty nice. It's pretty universal throughout all the bows now and
all the pick mounted sites. Still has your standard side mount holes there if you run a site that
bolts on the side of your bow. Same with the burger button or the burger hole still has that
along with the dovetail for your integrate system on the back here. It does come with two holes for
your bow quiver whether it be a one piece or two piece. You can buy attachments that mount into
those holes so you can have that. It looks like they have changed the angle of their limbs here.
They're a little bit more flat than they were in the previous years. They were a little bit more
angled up last year. They're running a five piece string system now so they said it's supposed to
help with tuning. I'm still not a really big fan of their tuning system. You can tell in previous videos
I'm a big proponent of being able to tune or shim a cam without having to use a bow press and
completely take apart in the system. I think Bowtech owns the market in that and Elite's not
far behind. PSE does have their easy 220 system so Matthews and Hoyt I think that's probably
going to be the next thing that the engineers work on to really knock out of the park. So this bow
comes preset from the factory at 29 inches which I checked and it is. We're going to set up the
Garmin. I'm going to shoot a 350 grain arrow, 29 inch, 70 pounds. See how fast it's shooting. I don't
really care about the IBO. It just seems to be the most common size and weight. We'll double check
this see how close we are to 70 pounds from the factory. We've got a digital scale. Like I said
we'll check the speed and then I'll probably give it about five to ten shots down range. Really get
a feel for this bow. Let you guys know how the draw cycle feels, how the grip feels, basically how the
shot is. First up we gotta check the speed. No, let's check the poundage. Scratch that. Reverse.
Like Willy Wonka. You ever see Willy Wonka? This is gonna be the first time
pulled this bow back. All right zero it out. I don't know if you can see that.
69.4. We have a 350 grain arrow, 29 inch, 70 pounds. Let's uh let's just see what it gives us.
331. We're gonna do one more shot with the 350 grain arrow. Just for funsies.
I'm actually super impressed with the draw cycle. A very small hump at the end. Very small.
Which is nice. 328.9. So right around that 330 mark. We're gonna shoot a few arrows
to kind of get a better feel for how this bow performs. Judging by how it shot, checking the
speed. I'm actually going to say that I'm a big fan of it already. But we'll shoot uh we'll shoot
four shots here. Kind of let you guys know what I'm feeling. It's a really a really nice back wall
which is cam offers two options. Extra hard back wall and a regular back wall.
It looks like I'm on the extra hard so that's probably why it feels so good.
The draw cycle it's a little rigid in the beginning but nothing out of the ordinary
by any means. You shoot enough bows you kind of have to preload enough anyways to
get it to draw back. Like I said there's just that right there. That little tiny valley.
It's very small compared to most bows. It does sound a little loud to me but I think it's just
because we're we're in a shooting range. Sound is bouncing off the walls. I'm curious to see
what this would sound like outside. Probably wouldn't be as bad. No no jump in the hand.
No hand shock. Obviously you're really not going to get any with a carver bow. I mean typically you
don't but grip is actually really comfortable and I'm super picky with my grips too. I really
prefer the ones that have a a narrower but flat backside to it and this one is a little bit more
rounded but I think just the the way that it's shaped it fits my hand really well.
I really like the string angle of this bow too being 33 and a half. Fits really well.
Doesn't feel awkward. Well it's a shooter that's for sure and it's fast. I'm curious to see how
this thing would shoot in our field test video when we have this thing decked out
with a rest that's tuned, sights on there, quiver, stabilizers, gets a little bit more weight on there.
I think this thing's gonna be really fun to shoot. Now as I mentioned previously the cam system is
completely redesigned. They have these new draw length specific mods so you'll see that there are
four screw holes here for your adjustments. This will give you a quarter inch draw length
adjustments up to three quarters of an inch difference so something to keep in mind. It is
very user friendly when it comes to that. It's where you're getting a lot of your efficiency from.
This bow retails at 2,050 bucks give or take. For that price I do think it's a good price. I mean
you get what you pay for when it comes to this bow. There's a lot of features on this thing.
The only thing I would knock it on is the ease of tunability. It's not very user friendly.
There's a lot to do to shim the cams on this. They do have the option with their new string system
that you can adjust slightly uh cam link with the yoke. So there's that but if you have to make any
major adjustments you do have to take apart the axles, the shims, the cams and take everything
out and reshim it. This is an awesome shooting bow. I highly recommend you guys checking it out.
Make sure you go to your local pro shop. Test shoot these. Let us know what you think in the
comments. Big shout out to Brett here at Willow Creek Archery in Temecula, California. If you
guys are ever in Southern California and have archery needs make sure you come in here. He
will help you out just like he helps us out. Thanks for watching. We'll catch you guys in the next one.
