New 2025 Elite Artus First Look

The Technology of Old Crossbows
4 followers
1 Video View·Aug 25, 2025
New 2025 Elite Artus First Look
The Artis by Elite. This is their flagship aluminum hunting bow for 2025. We're going to go over this
bow, check out all the specs, look at all the new features, give this bow a couple shots downrange,
and give you guys our initial feedback. So let's go over the specs real quick. To start off,
this is a 30-inch axle-to-axle bow. It has a six and seven-eighths inch brace height. It has 10
pound increments for the draw weight starting at 40, 50, 60, 65 pounds, 70, and 75 pounds.
It runs two different mods depending on which one you want to shoot, a performance and a comfort
mod. This one happens to have the performance mod on it. It has a let off of up to 90 percent. If
you want to shoot that much let off, you're going to notice a little bit of a dump on the back end
with the cam. I always suggest a little bit less let off, a little bit more holding weight. It's
easier to hold. The mass weight of this thing comes out to about 4.7 pounds and its IBO speed
rating is up to 340 feet per second and the draw length ranges from 25 inch to 30 and a half inches.
Before we shoot this bow and give you our feedback, I want to check the draw weight
really quick. This was fresh out of the box. We threw on a D-loop and new for this year,
the MX2 Ultra Rest from QAD. They have partnered up with Elite, so now they have their own
QAD rest. Let's double check here, zero out the scale, and we have 68.4 pounds.
Not too shabby. We certainly had other bow manufacturers who come in about six, seven
pounds off. So although I did just draw it back, so I kind of know how it feels, we'll actually
do one and shoot it this time. Draw cycle is not too bad. Definitely a no hand shock feel,
which is a plus. I think if you preload a little bit on this, the draw cycle is actually very
smooth and especially for being a 90% let off cam, there's really no dump into the valley at the end
like you normally get with most 90% let off bows. It's pretty static coming back, so it's
the same amount of pressure. Very dead. There's no recoil, no hand shock, no reverb, I guess you
could say. That's pretty nice. It's a 29 inch, 70 pounds. Shoots pretty good. Shoots pretty smooth.
So we're going to throw this thing down range next to a chronograph real quick
just to get our bearings. So we don't really care where it's at exactly to the card. That's not
where we're going to test. We don't have it set up to ATA or IBO specs. We are going to run it at
29 inch, 70 pounds, a little 68.6 I think it was, and a 350 grain arrow just to kind of get an idea
of where this thing is at with those specs. So we'll do one shot. We got the Garmin set up. It's
zeroed. See where it's at. 320.6. So one of the really cool things that Elite has brought to
market this year is the set technology. It's essentially a way of shimming your cams without
actually having to move or adjust your cam. So you have a set screw here or a bolt in the back here
that you would loosen. You would then turn to the right or to the left depending on which way you
want to shim your entire limb pocket to the left and to the right. And what that's going to give
you is basically your micro tuning and adjusting your cam lean if you need to to get that perfect
arrow flight. So that's actually a super nice feature. I hate having to put these bows on a
press to adjust or shim the cams. It's always a nightmare. So anything I can do to fine tune the
bow and not have to use a press is definitely a plus in my book. So like all bows on the market,
they do have your conventional side mount threaded holes for your sight here. They give you two
different locating options. It does come with a Picatinny rail mount system on the front here
for anybody that wants to use a pic mounted sight, get more streamlined. A lot of people
are starting to go to that. Like I said before, it has the dovetail attachment in the back here.
They are running their own integrate style rest this year. They've partnered up with QAD like I
said before. So this will fit all integrated systems. It does also have on the riser two
threaded holes to mount your core system, your core mounting system for all your hamski integrated
options. It does come with two threaded burger mount holes. So you do have an additional option
there depending on if you want to run a conventional mount rest on the side of your
bow. All right. So that's enough for the features for now. I do want to get a couple more arrows
shot through this thing. Really, really get a good feel on how the draw cycle is on this. I
need to release the shoot. I think that's probably one of the most important things when it comes to
buying a bow. If it's horrible to draw like we've felt in the past, then it's a pretty good deterrent
on whether or not you're going to buy it. Like with any bows, if you're not used to the draw cycle
right away, it will feel foreign to you. So if you are in the market for a new bow, I always recommend
shooting it, I don't know, eight to ten times to really kind of get used to how much preload you're
going to need, what to expect for the cams, how they're going to react to you, and how you need
to react to them. That way you can really, really feel if whether or not these things are going to
be comfortable for you. And for 70 pounds, it draws fairly smooth. And they are larger cams, a little
bit rounded, which does make the draw cycle a little bit more comfortable. And these are the
performance mods. So I'm sure with the comfort mods, you will have a much smoother draw cycle.
You will be sacrificing a little bit of speed, but for those of you who aren't very into speed or
don't really care, I would probably recommend going with the comfort option. Yeah, it's got a
really good shot to it. Like I said, there's no vibration in the hand, it's very
dead once the shot breaks. The bow doesn't feel very jumpy at all, not any more than what it
should be, you know, with having a relaxed grip. So I don't really have many bad things to say as far
as the draw cycle goes. I'm sure once you shoot it quite a bit, you know, you kind of get used to it.
Like I said, you know how much preload to put in and how hard to draw the bow back to get it to
come back smooth. Letting it down, 90% let off. Not always the funnest, but it's actually not
too bad. So a couple other things to go over in this bow. They do have their LTR system here,
which is an adjustable roller guard system. So for fine tuning a little bit of that cable
alignment, you can do that as well. The adjustments on these cams is quarter inch increments, so that's
actually a very cool thing. The grip on this, I'm not disappointed with. I like the narrower grips.
I don't know if you've seen any of the recent videos we've done, but I always mention how the
grip feels. The grip is key in order to maintain a consistent hand placement on the bow and archery,
everything is all about consistency. They don't have anything as far as adjustable back plates
for the grip here. It looks like they do have side plate options. These side plates do come on and
off. Obviously it has screws, so I'm sure you can buy some aftermarket side plates if you want the
grip to be a little bit wider. However, there is nothing on here that would allow you to adjust
the back of this and change whether or not you like a higher or lower wrist. So I like it maybe
like a four degree higher wrist, but on this it looks like I'd have to manually shim it and tape it.
Just one thing to keep in mind. It does have the recessed mounting holes here for your quiver,
whether you want to run a one piece or a two piece. And if you've noticed, the top of this bow
that is machined into the limb pocket itself and also the bottom of the bow, which is their rail
accessory connection. So they have a sling option that they sell. They also have a tree stand knob
here, a mount that you can put on there to raise and lower your bow when you're in a tree stand,
and also a bipod system that they sell and make that you would mount to the bottom here. So super
rigid system. It's not something that's put in after the fact. It's actually machined into the
limb pocket itself. So that's a pretty cool feature. It's a nice selling point if you're
looking to accessorize your bow and also having those pick rails mounts, anything that's pick
accessible. So if you have anything that you want to put on your bow, the sky's the limit.
Put your tactical light on there. Yeah, it's a good shooting bow. If you're in the market for a
short axle to axle hunting bow for 2025, be sure to check out the Elite Artist. You will not be
disappointed. Like Bam Margera and his dad.
