Learn 5 bone-chilling paint techniques to transform plain wood into a haunted Halloween sign! In this DIY tutorial, we cut our Asylum for the Insane porch sign with a laser and plywood, then used Foxy Hues outdoor craft paints to create woodgrain, aging washes, rusty metal, patina, and dry rot effects. Perfect for porch decor, Halloween props, or creepy craft show displays.
Full Expanded Version (recommended for the full description): This week we’re building a haunted Halloween porch sign from scratch — and giving it a seriously spooky makeover with five eerie paint techniques. Using Foxy Hues Outdoor Craft Paints, we’ll show you how to create:
🪵 Creaking Woodgrain – make new plywood look like old, weathered boards
🕰 Eerie Aging Wash – layers of grime, dust, and haunted history
⚙️ Menacing Metal – turn MDF frames into aged, hammered iron
🧪 Rust + Patina Effect – oxidized copper & rust that looks decades old
We used 1/2” plywood and 1/4” MDF, cut on our AEON NOVA 14 laser, then layered these Halloween paint effects with mica powders, cinnamon (yes, really), and Foxy Hues’ mildew-resistant, outdoor-safe paints. The result? A bone-chilling Asylum for the Insane sign perfect for porches, craft shows, or haunted house displays.
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just did five easy paint techniques
to make your Halloween sign stand out.
And we'll show you how we did it right
now.
[Music]
What is up? Welcome back. Do you like to
do it, build it, or make it?
So do we.
So be sure to like, subscribe, and tick
that bell to be notified of our new
videos each week. This week we're doing
five spine tingling,
blood curdling,
and bone chilling paint techniques to
make your Halloween sign spooky and
scary.
We'll be using our Foxy Hughes outdoor
craft paint to show you how to do these
cool techniques on a brand new Halloween
sign. And then what is it? Assane. What
is it? Asylum for the insane. No.
Insane asylum. Asylum for the insane.
porch post.
Step one, we're gonna gather all of our
supplies. We'll be using some halfinch
plywood. This is going to be our sign
post. We're going to use some quarter
inch MDF. This is going to be our sign.
We're also going to use some Starbond
thick to put our sign together.
We'll be using our Foxy Hughes paints.
These are outdoor house paints. They're
going to be perfect for this project.
And we've got a couple other little fun
surprises. We'll be using some mica
powders to mix into our paints to give
it a couple of cool different views and
accents. And then uh we've got a little
thing of cinnamon here. It's going to
help with some aging. So, we're going to
mix this into some of the paints, too.
Step two, we're going to make all of our
cuts. We're going to take the
quarterinch MDF and the halfinch plywood
over to the Eon Nova 14, and we'll cut
out our post and our sign.
The Eon Nova 14 is perfect for this
project. The large bed size will cut
this 48 inch signpost all at one time.
The bed size is 35 by 55. In this case,
I only had smaller pieces of half inch,
but it will do it.
We swapped from a 4-in lens for the 1/2
in ply down to a 2 and 1/2 in lens for
the MDF, and the swap was quick and
easy, and the autofocus makes changing
the material thickness a breeze. Step
three,
now we paint. Our Foxy used paints are
going to be perfect for this. These are
outdoor house paints, so we'll be able
to paint our post here and it'll be able
to sit on the front porch all season.
We'll also be able to use these paints
for our sign. We're just going to do
quick coat of black. We're going to keep
this out there. It's going to be
perfect. I can use it for other signs
later on, too.
We're just going to roll it with this
midnight bandit mask.
Paint technique number one. We're going
to do creaking wood grain. If you've
watched our test cut Tuesday, we've done
wood grain lots of times, but here's a
new take on the wood grain.
We're going to start with a light base.
We're using whack bat wood as our light
brown base. We're just going to paint
the whole backer.
Now, we're going to add our second coat.
We're going to use the darker color on
top. In this case, we're using pine cone
path. We're going to quickly roll it on
and then wipe it off with the wood grain
tool. Again, if you've seen us do this
on Tescat Tuesday, we've done this a
lot, but we're going to make it. We're
going to take it a step further tonight.
Mhm. We're going to make it look age.
This is just step one. So, I'm going to
roll it on while it's still wet. I'm
going to wipe it off with our wood grain
tool. I'm just going to do it in
sections.
I'll hit this top section.
All right. About the width of my wood
grain tool.
Now, this is all in the wrist. It's
really about rocking and pulling. You
want to keep it consistent. consistent
rock and pull. Now, the more you go
backwards, right, the more knots you're
going to have. The more you lean
forward, the more grain you're going to
have. So, I'm going to start forward
and start to drag.
And the more pressure you put,
the more m the more paint you'll peel
back off.
So, I'm going to keep it grainy towards
the end. That's okay. I'm going to leave
this part here cuz I'm going to rewet it
with the next the next line.
Dab it off so I don't get a big big glob
of paint. Now, for this one, I'm going
to do it starting at the bottom and rock
back forward.
Gives me a little bit different
knot pattern.
Yeah. Lean back.
Yeah. I like that line there. It's not
bad.
Yeah. Almost looks like
two separate boards. Mhm.
Yeah.
Rewet my roller. Come back in
for another plank.
I say keep it consistent. Kind of leave
that.
Yeah. That plank area.
Mhm.
I'm going to start forward again.
Lean back.
Give a little wave in that plank.
Now, another thing is you don't have to
be scared of this. If you don't like the
way it looks, you can paint over it and
just do it one more time.
All right. The next plank.
I think this will be the final plank.
It's just a four planker.
All right, I'm going to start back this
time.
Roll it in. Knot them up.
Give a little dip now and then make some
knots.
Put a knot there. Bring it back
right on through.
All right. What do you think, Kim?
Pretty good. Paint technique number two,
eerie aging wash. Our wood grain is
complete, but this looks like a new wood
sign.
Brand new.
But this is going out front of our
in
a sane asylum. I can't say that.
Asylum for the insane.
There you go. And it's been out there a
long time. It needs to be aged, right?
and it's spooky and it's haunted. So,
let's make it look like that.
We're going to use a dry brush technique
using some of this Bandits Bounty. It's
like a little green tint. Mossy green.
I'm just going to dab in here and really
brush it off. I don't want
barely any paint left. Got to check it
on another plate.
All right. That's kind of what I'm
looking for right there.
Right. Maybe a little bit more
now that you wiped it all off.
Yeah. All right. Right there. Looking
good. Now, I'm not going to put any
pressure. I'm just going to drag the
brush across and let it catch these
ridges.
Right
there. You go. See it catching the
ridges?
Just giving a little bit of highlight.
Well, with the next step, you could
probably give it a little bit more,
right? Otherwise, you're never going to
see that little bit. There we go.
There we go.
That's what I want to see.
Mhm.
Just trying to catch that top ridge.
I'm just at a slight angle cuz I want
the moss to be at the top.
Yeah, there we go. That's looking pretty
mossy. Catching them highlights where
I'm looking for them.
All right. What do you think? Looking
good.
Mhm. Think you need some more paint? I
think again with that next step, you're
not going to see it.
There we go. That's what I'm talking
about. Yes.
All right.
Yes, that looks pretty good.
All right. There you go. I think that's
looking good. I'm liking it. Hit the
edge.
and done.
We're going to hit this with a hair
dryer so we can move on to the next
step.
Because it was a dry brush, it really
didn't need much drying. This part's the
scary part. We're going to give it a
little more age,
right? It's been out there a long time.
Long time. It's collected a lot of dust,
a lot of dirt, a lot of grime.
Really rotten. Got to let this thing
rot. We're going to use our midnight
midnight. We're going to use our
midnight bandit mask to put a light coat
over top.
I'm not going to refresh my roller.
Whatever is in the roller is what I'm
going to use. I'm just going to roll it
on. Not a whole lot of pressure, just
enough to leave a little haze.
hit the edges
now. While it's still wet, I don't want
it to dry.
Coming in with a little bit of water.
Oh, missed the bottom.
All right, Kim, you at the ready?
I'm ready.
Got some paper towels.
Okay.
Some water. I'm going to give it some
spritzing to loosen up that paint.
And Kim's going to gently wipe it off.
Oh, me?
Yeah.
No, I don't know how to gently wipe it
off. You can do that.
Yeah, I got it.
Right away. It scratched it. I don't
know.
I don't want to fold my paper towel up.
I'll keep it.
There we go.
that top.
There we go. That's what I'm talking
about. Look at that.
Look at that. Look at that. See how that
See a little of that green here. Get in
there.
Peeking through.
Mhm.
Get a little more water.
There you go. I'm really liking that
now.
Look how aged that looks. That looks
super antique and old.
They really knocked that those browns
down.
All right, we'll leave it a little
darker on the edges. All
right. You know what, though? It's It's
not looking like it's been out there for
decades. Kim,
we're going to add one more step to this
to really give it that patina. Paint
technique number three, devilish dry
rot. We're going to use a little ambush
aurn to add some dark red edges on the
outside.
I'm going to use that same paper towel
that I was just wiping the black off
with.
And I put a little bit of that ambush
auburn on our plate. Just going to
crinkle this up so that I have an uneven
surface. Making it look just like
random. I'm trying to get it random.
All right. Let me knock it down a bit.
Get some of this off.
Yeah. Here. Give me an extra plate.
All right. I think I'm at where I'm at.
I want to dab about this much. And I'm
just going to come in around the edges.
We're going to rot the wood. This is
going to help it look a little rotted
around the edges.
I'm leaving some paper towel.
No, no, I think it was a little green.
Still have
hit the edges over here.
kind of look random. You want you don't
want to blend it in a little bit. You
don't want it to be too stand out.
You just want hints,
hints of that rotted wood around the
edges.
And if it looks too standoutish, just
come back in later on when you
got a little less.
Mhm. Hit it with your finger.
Or hit it with your finger.
Come up here around the skeleton.
Wow, that looks so cool. Actually, it
looks like it could be a pirate sign.
Let's make a pirate sign. Mhm.
You know, I'm in for the pirates.
All right. It's looking pretty good.
Anything in the middle or you just want
it on the edge?
Yeah, we'll route the edge. We'll route
some in the middle.
Little little wood rot in the middle.
Put it around these knots.
All right.
Let me think. Little rot over here.
Mhm.
All right. Well, where? Too much rot.
You're getting too deep.
Now, we'll come in with a little bit of
gypsy jade. I'll hit the other side of
this
this paper towel.
Make this side.
And we're just gonna make it look a
little wet. A little mossy wet like it's
been damp wherever this thing has been.
The creepy forest is damp. Just coming
in with a little bit.
This thing's overgrown by trees.
Again, just dab it down. You want to
just give it the hint of the green.
There's too much.
Come back in and
blot it away with your finger.
If you watch though, I mentioned Test
Cut Tuesday a couple of times. We go
live every Tuesday at 700 p.m. Eastern
time and we paint a new door hanger
design. Uh we joke about making art
versus making money. So on a test cut
Tuesday, we do like to throw in a paint
technique here or there so you can see
different paint techniques all the time.
This is advanced for a test cut Tuesday.
So we like to do this in its own video
so you can really see some of the things
that you could do and we can teach you
ways to add take this side. I mean look
at this board already. I am so excited
about this. This is looking great. You
would never know this started out as a
plain piece of MDF
and and look at that wood grain you
started with. Look at it now.
Yeah, it's really transformed in the
last few minutes.
All right. What do you think?
I think that's too much green over
there.
Enough.
This looks so good.
Garrett can't always show off his
artistic talents,
but when I do.
Yes. I love it. I love it when we can go
deep like this.
All right. I think the backer is looking
pretty good. Pretty done.
All right. Our creaking wood grain is
complete.
All right, let's set this somewhere to
to dry in patina.
Paint technique number four, menacing
metal. We're going to turn these metal
frames into aged patina rusty steel.
So, we're just going to paint them black
with the midnight bandit mask. Just one
thin coat because it's going to get a
lot of other colors here.
A lot of other colors.
Not even going to let this dry.
Now, we're going to come right in with a
little bit of this mica powder. We have
some coffee mica powder.
So, this is the technique that'll kind
of give it a little bit of shimmer. This
is something we hadn't really tried
before. This is new to us. Adding these
mica powders. You know, when you were in
your uh what is it? Oh, your resin
phase.
Yeah, your resin phase. Or when we were
in our resin phase. We're going to use
this mica powder that we have. This
one's copper. And we're going to give it
a kind of a a metal look to it with this
mica powder.
Hit some edges.
And we're going to come back over it
here in a moment.
A little edge here, a little edge there.
Here, edge there. Edge
everywhere. An edge. Edge. They don't
need to be super neat. This is going to
be aged. Nobody's going to come up and
ask how old the sign actually is. I
think you'll be okay.
Now, we used copper here. We have a
bronze powder that we've tried. And uh I
just think anything with that metal
shimmer to it, which all those cool mica
powders have a shimmer to them. I'm glad
I get to use them again. I missed you
guys.
Pull them back out. Pull them out of
retirement. I might have to pull some
resin out of retirement. That seems fun.
It does. I don't miss resin. You know
what I don't miss about resin, though?
The long dry times.
Well, I mean, there's so much UV resin
out there. Learn to dry it as you go.
I don't even know we've if we've done
much with that.
Oh, the UV resin.
Mhm.
I don't think so. A little on this edge
and done.
All right. Whilst everything is still
wet, I'm going to crinkle up another
paper towel.
I love my crinkled paper towels.
Mhm.
I use them all the time.
All right. Nice little crinkle. I'm
going to dab it in the goose gourmet.
And again, dab it off. Now, I'm going to
come in and do the hammering. Like I'm
hammering the steel. Ching ching. Ching
ching. That's really all about the
layering.
And if it looks like I'm coming in with
a little bit of too much goose, I can
always do the same thing with the black
and then come back in and come back over
top of the goose. Give it a little more
layered effect.
Looks good already. Good job.
It's not about getting all the places.
Just making it look hammered.
change up my paper towel a little bit.
I mean, you really ball that thing
tight. I don't know if mine wouldn't
look quite like that.
You don't roll yours as tight.
No. This is the kind of thing at craft
shows if you want to catch some people's
eye. They will stand and watch you
create a masterpiece while he's sitting
there. Garrett did this this same
technique. Remember? Oh, yeah. People
love that scrolled iron uh sign, that
welcome like iron scroll work sign. He
did that at a craft show and he drew a
few people just standing there watching
over his shoulder watching him do this.
That thing was sold before it left my
lap.
It did? Yeah, it did.
I was doing it in my lap. That good
paper towel scrunching right there.
I'm enjoying that one.
You like the pattern it's leaving is
what you're saying.
All right. What do you think?
Yes.
Thinking with it's pretty
some rusty metal. But that's not all.
Right. I I know something else you're
going to add to it.
It's still looking too new to me.
Paint technique number five. We're going
to add rust and patina.
We'll start with the patina because the
metal starts to oxidize before the rust
forms. So, the oxidation is that teal
color.
So,
just going to give myself just a touch
of foxtail tie. So, it's a blue, but it
looks it's got a teal tint to it. And
what what do you think I'm going to use
to apply this? Another paper towel
there. A paper towel. That's
Give this guy another one.
Another scrunching. Scrunch them down.
Another paper towel.
Again, we'll come out, try to dab it all
off,
and then we'll just come in at some
cracks and crevices.
Now, if it looks too defined and looks
fake, you get to even it out with your
finger, but we'll just hit it in a
couple of places.
There you go. Around the corners, it's a
little heavy over here. We're going to
come back in and rust that part up
pretty good. We'll rust this up pretty
good later on, too. So, we'll give it a
lot of oxidiz oxidation. It's already
starting to look great. I'm really
liking that mica powder back there.
Mhm.
So, where I plan to put a lot of rust,
I'm going to throw in a little bit of
extra patina.
All right.
Man,
pretty happy with that.
I'm going to need just a little bit of
wildfire whisker. Just enough to make
little wet spots.
Pro tip, as you get to the end of your
bag, you don't want to leave it with air
in it, but if you blow a little air in
it, you have a little more room to shake
up your paint a little bit. That is
another thing with these paints because
they are weather resistant, mildew
resistant. They have a lot of those um
those weather resistant properties in it
and it'll settle to the top. So you want
to shake them up every time to mix those
in. So he's added the foxtail tie to
start the patina. Now we're going to add
the rust.
Now Kim's going to help me out here
while the paint's still wet.
Secret ingredient.
She's going to hit it with a little bit
of cinnamon. Make this thing sweet.
So this is pretty cool. You probably
have this in your spice cabinet. This is
going to give it that orange age and
it's got a little bit of texture to it.
So, just dabbing off a little bit of
wet. It's my wildfire whisker. Just
going to come in where I want a lot of
rust. Let's start up here in the corner.
All right. Hit it.
Yeah, that's looking good.
All right. Hit me.
It smells good. Yeah.
All right. Let me dab around and you can
just follow me with the
I got it. I got you.
Oh, that's a lot.
That's okay. We want it caked in some
places. So, the thicker the paint, the
more likely the cinnamon's going to
stick to it. Did I say it smells good
already?
Yeah. You do have cinnamon.
I do. And I want this to rinse off in
the rain. So, I've got to make sure it
grind it down into that paint something.
Oh, Garrett. Garrett ain't scared.
Get in there.
You don't need me. You got it.
[Music]
All right. You You've rusted it up
enough.
All right. I think it's looking good. I
think it's looking good.
What do you think?
I like it. You're still messing with it.
Just giving them a little dry rub.
We'll put this in the oven.
350 20 minutes.
He's kidding. We're just going to let
this dry while we move on to the
letters.
Now we're going to do the words. Kim,
what do the words say? Asylum for the
Insane. Way easier if I read it.
We're going to paint all the words in
some cussing crimson. We'll paint the
skull in some ash avenger. We'll come in
with a little bit of bronze. And then
we'll give it some aging. We'll just
start with the cussing crimson. A little
tip for this red. If you want your red
to be poppy and bright, think Christmas
time, then you can put a white underbase
or a a like primer layer, and then paint
the red on top. It'll be brighter. In
this case, I mean, it's still red and it
looks good, but it's just a little bit
darker red. And this is going to be
perfect for what we're doing because
we're going to age this red. When I'm
rolling all of these items using this
foam roller, I'm not putting a lot of
pressure. I'm not trying to ooze down
the side. I'm just coming in from
different angles to cover the surface.
We're going to do the same thing with
the bronze around the edges of the
letters. This time I'm going to dump
some in a plate. I think I'm going to
use my finger.
You know what you could use as a wedge
sponge? Don't you think?
Oh, yeah. You want to try the wedge
sponge?
That might work better.
Getting wild.
That's Whoa.
Little goes a long way here.
Not bad. It works. Kind of like it like
that. I should dab it off before I do it
again next time.
Like
Yeah, that looks cool. I like that.
Maybe we should have put on while it was
wet.
Yeah.
All right. What do you think?
We are making art.
We are definitely making art today.
All right. Now, while this is all still
kind of wet, I'm going to come in with
that Midnight Bandit mask again. Just
give it a light roll
and then a spritzing
and then a wipe in.
All right.
Oh, already that looks cool.
I love that.
I buy scrapbook papers that look like
this.
That is so cool.
I don't know. Do you even wipe it?
I don't know. I really like it just as
it is.
I I think I vote no wipe.
Okay.
Just kind of get the edges.
You going to mess with it too much.
Just enough. Trying to just round the
edges a little bit. Make the edges look
Stop. You're painting it black.
There. Done. All right. Let me get this
guy. I think I will spray him. I don't
know. Do I wipe it now that I sprayed
it? It's looking kind of cool.
Yeah, you should wipe it. You dabbed it.
I said wipe it.
Better.
Yes. Better.
I'm liking it.
And why are you doing that? So that
kind of give it some roundedness.
Give it that dimension.
Yeah. There you go.
Step four, it's time to assemble. We're
going to bring it all together. We're
going to use a little bit of wood glue
to put the base together. Then we're
going to slide the rest of our post
together. Oops. Sorry. It's okay.
I forgot about the hook. Slide the rest
of our post together. Then we'll put our
sign together.
Now, we've extended this base a little
bit. Typically, with our 4ft post that
we've published in the past, we have
just a square base. But because this has
an arm and the weight is going to extend
out from the post, we had to extend the
base. We just made a little bit longer
rectangle.
It's a no tip zone.
And I'm going to add a little feet on
the bottom. Now, I was thinking I didn't
want this plywood just to sit flat on
the ground like this. So, we have these
little feet I found at Hobby Lobby. They
call it wooden base is all it says. And
I'm going to put this onto the bottom
just to get it off the ground just a
tiny little bit. You could use a square
piece of plywood, something like that.
In this case, we're gonna put these feet
on the bottom.
Make it happen here.
[Music]
[Music]
We're going to use some of the Starbond
thick to assemble the sign. We're just
going to put the Starbond thick in all
of the score lines, then put our pieces
on
or
or put it on the piece and then put it
inside the score lines.
[Music]
There you have it. Five bone chilling
paint techniques to make your Halloween
signs. Which one was your favorite? Mine
is the rust.
Mine is the mica powder. Don't worry if
you love these paint techniques. We have
a recipe card for each one of them on
our website at k&gmake.com.
Big thanks to all of our patrons. We
love you guys. That is the best
community. And if you enjoyed this
video, be sure to like, subscribe, and
hit that bell to be notified of our new
videos each week.