If you want to help support my mission of encouraging and empowering people, please visit my Amazon store. When you buy things from my store that you would normally purchase through Amazon anyway, a small percentage goes to support my cause. I have also included items that I can feel good about recommending.
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
Disclaimer: This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes or vehicles, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes or vehicles. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
Hey kids. So, today I'm going to try
something a little bit different. I have
a My van is a 2005
and the headlights are really bad. The
the cover of them is really bad. And
I've seen all the different videos
talking about toothpaste or Coca-Cola or
whatever, but I'm going to actually try
to try to use this. I'm not getting
compensated for this, so you're going to
get a real review. Um, it's has a lot of
good stars. I'm going to try it. Give it
the old college try. Hoping it works.
So, uh, so you'll get my real honest,
uh, opinion on it at the end. I am
hoping it works because I would like to
fix my headlights, right? So, um,
anyway, so before we get started with
that though, I do have a dad joke for
you. Did you hear about the apes that
started a company? Yeah, I hear it's a
bunch of monkey business. Ah, so anyway,
let's get started.
All right. So, as I look at the
instructions on it, it has these
different
uh packets inside of it. It says step
one,
step two, actually step one and step
three. Step two is actually I'm going to
end up sanding. It comes with this
little
unit here that you sand it with. And
then you end up step three is putting
the coating on. So, I'm just going to
walk through those steps. Again, hoping
it works. So, we'll see. I understand
you want you want to have a squirt
bottle, too. So, I've done a little
research kind of seeing how you do it,
but I'm going to do it for myself and
give you my honest opinion.
All right. So, here's how my headlights
look. Here's the right one and the left
one. The left one's a little worse than
the right one, but we'll see how it
works.
So, put on your gloves. And step one is
you deoxidize. So, you have these wipes
in step one. You have four for each
side. You can see the gloves weren't
fitting me really well, but I went ahead
and did it anyway. It still covered my
hand, so I only used one glove and just
use my right hand for this. And you have
four wipes for each headlight. So, you
have a total of eight wipes. And you
just go over it four different times.
And you'll see that there's yellow. And
each time you wipe, you get a little bit
more off. And you can see that the wipe
is yellow each time. Even after I've
done it four times on each headlight, it
still ends up a little bit yellow.
[Music]
Here's the second wipe.
[Music]
Here's
[Music]
the third wipe.
[Music]
And here's the fourth wipe.
[Music]
Even after you use all four wipes,
you're still going to have a little bit
of yellow left on your wipe. So, that's
normal, just so you know.
Now I'm going to do the right headlight,
but I'm going to speed through it since
you get the point. It's the same as the
left.
[Music]
Okay, this is how both of my headlights
look after that first step. My left one
has some scratches in it. My right one
has a few scratches, but not as bad as
the left.
So now we're going to go ahead and
squirt it with a water bottle and wipe
it off good before we move on to step
two.
I used a paper towel here, but you can
also use microfiber, which I also used.
So now we're going to move on to step
two, which is just sanding. You're going
to use the 2000 pad, which is a little
bit grittier than the 3000. So then you
just use this handle here and attach it.
It just velcros right on. And then you
want to squirt the headlight down good
with your water bottle. And then also
squirt the pad down good as well.
And you might be tempted to go in a
swirly pattern with this sandpaper, but
don't do that. Just go back and forth
just like this. Just going back and
forth, back and forth. And make sure you
keep everything wet is what I found. You
don't want it to dry up on you. Just
keep squirting water on it and going
back over it. And this is how I did it.
I spend a little longer on the left
headlight for me. I went over it and
over it and over it, especially with the
the 2000 grit cuz it's a little bit
grittier than the 3000, right? And I
just kept going back and forth on it
because those it had those scratches in
it that were fairly seemed fairly deep.
So, I wanted to make sure to do the best
job that I could. So, I spent longer
than I probably would have or longer
than I did on the right. So, I just kept
going over and over it with the 2000
before I switched to the 3000 for the
left one.
[Music]
[Music]
You can see I went over it and over it
and over it like I said. And you just
want to keep everything wet while you're
doing this. So, and make sure you spray
the pad as well. Again, you may not need
to do this with your headlight if your
headlight isn't as bad as mine was with
the scratches, but I just wanted to make
sure I got did the best job I could
before I put that final coating on.
[Music]
And then to kind of see where you're at,
you want to wipe it off so that you can
see uh how your progress is looking. And
I've noticed some scratches in there
still, but they're uniform rather than
what was there before. So, I didn't know
whether I should be concerned about
that, but I wiped it off and was able to
see where I was at.
I felt like I should try to get it a
little bit better. So, I went ahead and
went back over it all over again on this
left one. Again, I just wanted to make
sure it was prepared as best I could
before I did the final step.
[Music]
Now I switch to the 3000 pad on the left
headlight.
[Music]
[Music]
[Music]
Just
[Music]
walking in court.
[Music]
Now we're going to do the same thing
with the right headlight and just kind
of go through the same steps.
[Music]
Remember to keep everything wet during
this step.
[Music]
Now we're going to switch to the 3000
grit, which is a little finer to get out
even more scratches.
And do the same thing. Just go back and
forth and back and forth. Don't swirl.
Go back and forth like that. And then
just periodically dry it off to check to
see how your progress is going. And then
I found that there was still some minor
scratches in it before I did the final
step. And I guess that's normal because
it you'll see how it turns out.
[Music]
[Music]
[Music]
I'm including all the sanding footage
just to show how many times I went over
it. I'm speeding it up, but I wanted to
get give you an idea of how many times I
actually went over it.
[Music]
Then wipe both of the headlights off
really good. And we're going to even
blow dry them, too, to make sure there's
no water at all.
[Music]
All
right. So, I'm trying to show you that
you can still see some fine streaks.
They're all uniform going left to right.
They're going horizontal, but you can
still see the streaks. I was a little
hesitant to put do the final step cuz I
thought maybe I needed to get these out,
but you'll see once we finish it up.
Before you have that final step, you
want to make sure everything's
completely dry. They really emphasize
that. So, I got out my blower and blew
everything dry.
[Music]
Now, here's what they look like before
that final step.
Okay, so I just started from the top and
I went straight across and just worked
my way down. And they say 50% overlap.
So because you just want to make sure
you get everything. So all I'm doing is
just wiping straight across. Wiping
straight across. And you can see already
that it's removing that haze.
Pretty amazing. So 50% overlap. Just
keep doing this and go slow and just
methodical as you're doing this. Just go
straight across because you don't want
to miss anything here. I think you just
want to do be careful. Just go straight
across. There you go. just like I'm
doing here.
And look at that. It is really amazing.
It's cleaning things right up. So, I
flip the pad over and then I'm just
going straight across. Straight across.
Pretty satisfying. Look at that. It is
amazing
what this thing does here. It kind of
takes out those scratches or fills them
in. Looks like a brand new headlight.
Okay, I started with the right side just
to get the hang of it because I knew my
left side was worse. So, here we are.
We're going to start from the bottom and
just work our way up on this one. Slow
and steady. Look at that. Pretty
amazing.
Slow and steady. A nice little pace
here.
Cleaning it right up.
[Music]
Once you're done with this, final step.
You want to keep it free from getting
wet and you don't want to drive the
vehicle for an hour because you want
this coating to harden.
[Music]
So, here's before and after on the right
headlight
and before and after on the left
headlight. Pretty satisfying. It's nice
when something works as advertised.
>> Okay, so that was interesting. I was a
little skeptical at first that it was
going to turn out so well, but boy did
it ever turn out well. I'm I'm really
tickled by it. So, it's hardening now.
So, it's supposed to harden for an hour
before you drive the vehicle. Uh, so I'm
going to drive the vehicle and if it
fades for some reason in a week or a
month or whatever, I'll try to update
you. But right now, pretty impressive. I
think it cost me 17 to $20 for that
little kit. And boy, those headlights
are like brand new. And that's a 2005
Toyota Sienna. So, pretty cool. Uh yeah.
So, if you have another product that's
like like this that you maybe are
skeptical of that you want me to try,
let me know in the comments and I'd be
happy to try it out if I have a need for
for that particular product or I have a
a project that I'm working on. So,
anyway, I hope that was helpful for you.
Thanks for watching and God bless you.