
Ceramic Art Studio
35 followers
Aug 24, 2025
Konnichiwa, I'm Kana.
I'm going to talk about how I make clay.
The clay I usually use is called Hanjiro.
It's a very soft clay.
In this state, it's gray.
But if you bake it at a high temperature, it turns white.
Now I'm kneading it to get the air out of the clay.
After kneading, I shape it like a bamboo shoot.
Then I put it on an electric wheel.
Then I put it on a bag and use it.
The price of this bag is about 120,000 yen.
But I bought a used one for about 30,000 yen on Yahoo Auction.
So it's very old.
It makes a lot of noise, so I'm in trouble.
I've been using it for about six years.
Like this, I hit it firmly and stick it on the top plate.
Electric wheels can also be used to draw water.
Like this, I put water on it.
Water plays a role like purified water.
I'm not making a shape now.
I'm stretching and shrinking the clay that's been set up to be centered on the table.
By doing so, the clay is firmly centered.
It's called Tsuchigoroshi.
I'm trying to keep my body in a position where I can't rotate it as much as possible.
When it's centered, it's time to make a vessel.
I don't make one vessel from this big lump of clay.
I make a few vessels from this big lump of clay.
What I'm doing now is taking the amount of clay that I'm going to make first.
I'm stretching it up from where I made this dent.
I'm stretching the clay little by little rather than changing the shape at once.
It's hard to return the shape to the outside because of the centrifugal force.
When I make a dent, I try to make it as cylindrical as possible first.
Then I make the inside bigger and make the mouth smaller.
I think that's probably how I make it.
There are tools that make the mouth thinner while making the inside bigger.
For now, I use my hands.
I think it's very important to use tools.
I think it's easy to do because I feel like my hands are the most tools.
I think I'll be able to make another shape if I use tools.
I want to make the mouth really small.
I want to make the mouth smaller, so I trim the edges a little so I don't get my fingers in it.
I can spend a lot of time on adjustment until it's satisfactory.
It takes a lot of time to get to this point.
Bamboo has a rough fiber, so maybe it's a good idea to change the type of wood and make a tool.
The surface is smoothed out with a very thin stainless steel plate.
I'm going to cover the surface with a texture, so I'm going to fix it as much as I can before I finish it.
I think it's best to have a balance between the size of the whole thing and the size of the mouth, but I'm always looking for it.
In my case, I didn't expect to be able to put a flower in it.
It's too small, the mouth is too small, I can't put a flower in it, I can't put water in it, so it's like a dry flower even if I stick it in.
I cut it with a string.
I'm making the last one from a large lump.
Recently, I've been making things like vessels with the image of crushing stone.
You can easily clean the top plate by turning it like this.
I'm sanding the tools to make a fine texture.
If you leave what you made for a while, it will be just the right hardness without sticking, so you can carve lines and dots.
I'm not drawing patterns or patterns, I'm just making a texture by adding dots one by one.
I'm going to finish it with a feeling.
With that texture in mind, I'm making a way to make patterns like this come to mind.
The way to do it is simple, but by changing the tools and changing the lines and dots, I think I can express an infinite texture.
I think about it every day and make it.
After I've grasped and caught up with everything, I dry it for about a week and bake it in this small electric kiln.
I can't color it unless I bake it once, so I bake it at 700 degrees for 60 hours and then cool it down for about 12 hours and then take it out at 150 degrees or less.
It's a very small kiln, and the depth and width are about 25 cm and the height is only about 30 cm.
It's very easy to adjust, and you can bake it with just one button.
It's a completely different beige color from the gray color after baking.
I baked it at a low temperature of 700 degrees, so if I bake it at an even higher temperature of 1230 degrees, it will be a whiter color.
What I'm wiping with a wet sponge is that I'm cleaning up the excess powder and dirt on the surface.
There is a small hole in the eye that is not visible, and it is very water-absorbing, so even if it gets wet, it will dry immediately.
It's like a light-painting mat.
After that, I can finally color it, but this is the same color as the one used for painting dishes.
The ingredients of the color of the pottery are basically oxidized metal,
and oxidized cobalt turns blue, oxidized iron turns brown, and oxidized manganese is also used.
After rubbing it with a cotton swab, apply it to the entire surface.
Since it is a powder, the moisture is absorbed and the powder remains on top.
If you bake it in the previous state, all the colors will be one color and the texture will disappear.
Use a melamine sponge to wipe off the remaining color only on the scratches.
If you wipe it off, only the surface pigment will be removed and only the lines will remain clean.
It is very important to use this melamine sponge.
If you use a regular sponge, you can't wipe it off so cleanly, so this is the point.
By wiping it cleanly, the contrast between the line and the white part of the clay is clearly visible,
and the texture is clearly visible.
After all the coloring is finished, we will make the final adjustments.
At the end, apply 1230 degrees to fix the clay.
Bake for about 12 hours until it reaches 1230 degrees.
After that, cool it down for a whole day and take it out of the kiln.
Adjust the height of the kiln to make it more efficient.
The finished clay is white.
The final finish is to waterproof the surface.
After taking it out of the kiln, it feels rough to the touch,
so by waterproofing it, it will have a moist and smooth texture that the clay itself has.
I don't usually touch it, but I care about the texture, so I finish it like this at the end.
Even if you sand the surface, the color and texture will not disappear, only the touch will change.
If it's just a picture or video, you may think that this texture is a brush-painted or flat work,
but I'm making the texture precisely.
The feeling of touch is slightly different for each person.
Thank you for watching.
