Last mod to Tim’s FMA supersonic rev tactical to improve accuracy

The Precision of Crossbowry
1 follower
Aug 23, 2025
Last mod to Tim’s FMA supersonic rev tactical to improve accuracy
Hello everybody. I know I did a final video on tins and mercos, but mercos is gone.
But, I kept thinking, Friday, surely my bolts can't be that inaccurate, so it must be something to do with this bar.
And, yeah, that left side of that mag, at the front here, was way lower than what the right hand side was.
So, I took the mag off and I put it in the mill and I chomped the lood out the front here, with it still bolted together.
I took about 2.5mm out.
And, there, look what that's doing.
I'll put the video of when I opened it.
Well, I was about to pack Tim's rubber, and I couldn't help thinking about this front.
That was too close to the barrel.
And, I had one or two bolts I shot, and it just tore the left fletching off as it came out of the bow.
And, these moulded sides being as they are, like on mercos, the right side at the front, at the top, was higher than what the left was.
On Tim's here, this left side, was a lot closer to the bottom than what the right was.
And, as we can see with the helical on a bolt, the left fletch sits up at the back and the right one sits down on the barrel.
There's another one, look.
Yeah, that would have been the left side if I was shooting at number up.
So, yeah, that's what they've been doing, so I'm now taking the lood off it.
And, I'm not being shy with it, as you can see.
I'll take some off that as well.
I'll take them out my way files, and it'll stay with that height.
It machines with a tungsten bit a lot nicer than it does with a foil.
That's for certain.
Alright.
Let's have a little bit.
That's the trouble now, the foam is right where I want to go and put my head.
Beautiful.
She's not going to be catching any more fletches any time soon.
I should have another one there, wouldn't I? Yep.
Excellent.
She won't be knocking any more off.
Yeah, these are the two voices I had to get as a pair, so that I could plant these mags in here and mill on them to my heart's content.
Well, that looks better.
Much, much better.
Cool, even though I now milled all that out there, there's still a huge...
God, that was low.
I don't even know how them skinny standard bolts came out there in the first place.
That's... look.
Cool, if I stick one of them soups mill in there.
Cool, yeah, that's still really close.
Blimey.
It's a good job I've now done that.
I will test the accuracy of this again now I've done that.
Because you can guarantee that every single time I've been shooting this, those left fletchings have been hitting that on their way out.
Right, awesome. I'll try that tomorrow.
Brilliant.
Look at the difference in that compared to all these other holes where they were going.
Well, not so much these bolts, but the other ones that I was trying.
So...
That was Friday I milled it.
Saturday I had quite a few more shots with it.
These are those red ones that I've got on eBay.
That loads of people ask for, but nobody's buying.
Um...
That was a...
standard rev bolt that I shortened and put a 129 point that I made in, like I did your other ones.
I used a different jig to fletch it.
The first one I made.
So...
I'll screw the handle to here so I can hook the...
thing over.
Oh, that's working quite well.
I gave...
mine a service the other night because I...
I made a bolt out of that high vis to try in it.
I shot it and I think the string jumped over the top of it or under it or something because it sounded like a dry fire and it stretched my cable.
So I've made a new set.
And finally...
got my aluminium handle and...
new carbon roof in it.
And I've set it all up again for night vision.
That gave a few rats a surprise the other night.
Right.
All right.
Going with the same handle.
I'll try this again.
Let's try this out.
So that's the problem when you put a helical on...
the fletchings.
The right one sits down and the left one sits up.
So...
And then obviously as well with the helical they want to start turning as they're coming out of the barrel.
And I was finding that...
in this one.
And I think I had one or two in hues to it.
I'd shoot it and the bolt would go in the target but then...
on the way back over there to go and get the bolt I'd see a fletching lying in the garden.
And sure enough it would always be the left one.
Because it was catching on the left side of that.
Well done.
Joy's a bitty mild.
Right.
On this side I don't think so.
Oh that's better.
It is getting dark and...
Oh that's much better that.
I've been thinking about putting that handle on there for ages.
Oops.
Right.
I'm going to turn that red dot down to number one because...
the highest setting is this one.
The thing is I didn't know somebody was shooting sitting here.
I keep counting them on my foot and...
Martin I was standing that down there obviously upside down.
So I finally like 20 minutes ago got round to doing that.
Oh that's much better.
Ha!
Yeah.
Well that's curved.
They're not catching on there now.
Yeah that was so low this one was.
There was barely any gap there at all.
Let's see.
Just pop the little red ones in there.
Right.
Now I am finally...
happy with Timber.
What an awesome little thing.
Right.
I'm going to put some stronger limbs on this again.
Beast of a beast.
Ha!
The one I shot down there about an hour ago went straight in the door but that one didn't.
That one was better.
Let's put that in there.
Righto.
Right.
Oh.
That is much better than what we were getting.
We're certainly not damaging any flections in that target.
That was the one I shot about an hour ago and then the second one and then that one just there.
I do love those broadheads.
The rats don't but I do.
Well that's a point.
Let's see.
There's that box handle.
Mine.
But obviously you can't...
shoot them broadheads into a load of...
sheets and stuff because I've done that before and...
the broadhead twists all the material up until it stops but the...
bolt is still spinning...
and it...
spiral fractures the carbon and it just...
opens it up like a corkscrew.
I did that to one of these set of three...
so I had to make another one to replace it.
I heard that hit the wood.
Yeah, that hit the wood.
But the good thing about the wood being in the middle...
it's got all that...
cushioning behind it so that...
it doesn't actually stick into the wood.
Right, very good.
Right, so I'm super happy with that.
No.
I've just got to...
sort whose limbs it is.
I've got a couple of eBay orders.
Yeah.
Over 200 times I've shot that now on that string set.
Absolutely superb.
Right, very good.
Well, there you go Tim.
That is all done for you.
Right.
Be good.
Can't be good.
Be careful.
See you later.
