In this video I'll show you how I prune my fruit trees during the first summer after planting. These are all two year old trees and this first summer pruning is necessary for size control and structure creation specific to backyard orchards with a wide variety of trees in a small space. Ideally I would have pruned these trees in July, but due to a busy fire season in my job as a California firefighter, August was the earliest opportunity I had to summer prune these trees. After pruning I painted newly exposed branches with IV Organics for sun protection. Subscribe to see how I create and maintain this new backyard orchard.
Complete Backyard Orchard Video Series: • Backyard Orchard
As an Amazon Associate I earn a small commission from qualifying purchases.
All of my fruit tree selections from Green Acres Nursery and Supply in Sacramento California: i. Flavor Delight Aprium -Early June ii. L. Evas Pride Peach – late June iii. Double Delight Nectarine - Early July iv. L. Spice Zee Nectaplum – Late July v. L. Shinseiki Asian Pear – Early August vi. O’henry Peach – late August vii. L. Li Jujube – Early September – Mid October viii. R. Blackjack Fig Aug 10-November 5 ix. L. Panache Fig Late August – November 5 x. R. PINK LADY apple Mid October xi. R. Giant Fuyu Persimmon Mid October to Mid November xii. L. Fuyu Jiro – Late October to December
Music: licensed through Adobe Stock 1.Wandering Blues ASLC-12E4ACE2-0A223F497E 2.Horseback Riding ASLC-12E4ADE8-401C491A3C 3.Lazy Picking ASLC-12E4AEBC-A09B8454C7
Four months ago, I planted 12 fruit trees
as the first step in creating this backyard orchard
that will eventually give me year-round harvests
of a wide variety of fruits,
from peaches to nectarines to plums and figs
and persimmons and even some odd ones
like this jujube here,
which apparently is more than just some gummy candy
that you find at the movie theater.
And when I planted all these,
I made a full detailed video showing that entire process
from soil prep to irrigation, planting,
and that first dormant pruning when I planted them.
And even though pruning was just a small section
of that video, a lot of people told me
that was the most helpful pruning demonstration
that they've seen.
So I'll add a link to that video at the end of this one
so that you can see not only how I pruned these
when they were dormant and when I planted them
as year-old trees, but also everything else
that I've done to get to where I am today.
And that's my plan in the future
is to continue to make these videos
so that you can see not only what I'm doing now,
but what the results of all the cuts that I'm making
and everything that I'm doing are six months from now,
a year from now, and well into the future.
These videos, this series will follow this backyard orchard
from its inception all the way until maturity
and well on into that.
So if you wanna follow along with this process,
be sure to hit that subscribe button.
You know, we've all seen those videos,
garden videos or what have you,
where somebody does something and it looks great.
You're like, okay, cool, but did it work?
You know, did it die?
It died, right?
That's why you didn't make it that follow-up video.
I won't do that to you.
I mean, something might die, but I'll show you.
I wanna show you what happens as a result of all these cuts
because it's pretty amazing.
And I know that pruning fruit trees
can be really daunting, intimidating.
It's kind of scary, especially for new gardeners
to make these big cuts.
And so seeing that making these cuts
isn't gonna kill your tree,
it's actually gonna make them more healthy is encouraging.
So I'm gonna show you what happens
after I make all these cuts.
And if you wanna see, like all these trees,
I cut these things all down to about two feet
and look at the size of them now.
These things are massive.
So without further ado, let's get to cutting.
Pruning is a necessary step for all fruit trees,
but it's most important in these first few years
because this is the time when we're determining
and establishing the eventual size and shape of these trees.
And a lot of people ask, when is it too late to prune?
Or what if I have this large mature fruit tree
and now I wanna bring it back down to size?
Can I still do that?
And you can, and I'll cover that later in this video,
but definitely the best way to do it,
if it's still an option,
is to start with a small tree and maintain it small.
So I'll start with showing you this process,
the proper way, if it's an option for you,
and hopefully it is.
So when I planted these back in early spring or late winter,
I made some really low heading cuts at about 24 inches,
way down here.
And I did that to establish a low branch scaffold.
Basically the scaffold are where the first lateral branches
come off this main trunk.
And the goal there is to create a low scaffold
that will create a low, small tree.
Because as a backyard gardener,
it's up to me how small I want this tree to be
or how large I want the tree to be.
For commercial growers,
they're worried about getting equipment through there
and your tree tag from the nursery is gonna tell you
how large the tree might grow.
But it's really up to us and it's established
and determined through these pruning cuts.
So the first step is heading it off low.
This is a Double Delight Nectarine.
I just planted it.
Right now it's about nose high.
It's a two year old tree.
And so I wanna make my initial pruning cuts on it
to bring the scaffold way down to about knee high.
So I'll come way down here.
Now I'll make this cut at a slight angle
just above that bud.
All right, with the top gone,
my next step is to tip prune each of these
just beyond an outward facing bud.
That's it for this winter pruning.
This'll grow out in summer, put on a lot of growth
and then we'll prune it again then.
Now it's had some time to grow and really branch out
and put on a lot of new growth.
So today I'm just gonna kind of check that vigor.
I'll bring it back down to size
and I'll open up the center a little bit.
And I'll start with this Nectarine here.
I'll show you each of those steps
and how I'm working through that process with this Nectarine.
Then I'll take you around to some of the other trees
to show you what I might be doing with different varieties.
And I'll also show you some different examples
because this is a pretty well balanced tree.
It's gonna be a good example,
but you're gonna come into different things with your trees.
They're all gonna be growing a little bit differently
even though they're all kind of following
the same general principles.
Before I start making any cuts on this tree,
the first step is deciding which shape and style
I'm pruning it to.
Whether it's a young tree and I'm establishing that shape
or it's a more mature tree
and I'm just maintaining that shape.
There's three main shapes or styles for fruit trees.
There's a center leader, commonly used for apple and pear.
And that's where you'd have one main trunk
and all the branches coming off that trunk.
Or a modified center leader
where you have a low scaffold, a main trunk,
and then another upper scaffold.
Or there's an open crown or open center tree
used mostly for stone fruits like peaches and plums
and nectarines, mostly what I have here.
And that's what I'm pruning these trees to.
So that's where you would have basically headed off
as I did when I planted these.
Then you have outward scaffold branches
and you have an open center.
And as you can see,
this one doesn't really have an open center anymore.
So the first thing I'll need to do
is kind of take out this center leader
that's grown from this vigorous bud.
But before I make any cuts at all,
I also need to make sure that I've got sharp, clean pruners.
So I put an ice edge on these
and I wiped them down with isopropyl alcohol,
which I actually recommend doing between each tree,
not just before you start,
but when you go from tree to tree,
you don't want to spread that disease.
So wipe them down nicely with that.
And I know that videos of pruning
when these trees are leafed out
can be really hard to see where I'm cutting exactly
and what I'm doing for these cuts.
So before I start making all these cuts in this tree,
I want to show you an example
of the two main types of cuts that I'm doing
and how I do them.
So I'm just gonna take a little bit off the top here
and come in close.
So the main two types of cuts that I'm doing
are thinning cuts and heading cuts.
A thinning cut is where I would go right next
to the main trunk of the tree or branch
next to this collar here.
So this is what's called the collar,
right where the branch connects.
I'd go about an eighth of an inch from that
and take it all the way off.
That's a thinning cut.
Or a heading cut.
A heading cut is where I go anywhere mid-branch
and I make that cut at an outward-facing bud.
So this is my outward-facing branch,
outward-facing bud right here.
A heading cut is made eighth of an inch past that bud
and that will encourage this bud
to create a new branch outward.
So that's a heading cut.
That's a thinning cut.
Let's start cutting.
Okay.
So if you look close, you can see right here
where I made my initial heading cut
and it's starting to heal over really nicely.
But then, just beyond it,
you can see this new leader starting.
So what happened was I cut just above this bud right here
that I wanted to be on my scaffold branches.
But because it was a terminal bud,
meaning it's the bud at the end of a branch,
this got all of the energy.
So it became very vigorous
and now it's basically becoming a new leader
rather than a scaffold branch.
All these are nice-sized branches.
This one is almost the exact same size as the main trunk,
so it's way too vigorous.
I need to take this off.
My options are I could take it off right here
where I made my initial cut,
but that would only leave me
with these two branches this way and one this way
and I wouldn't really have anything on that side.
So if I come up a little bit further,
I can see I've got branches here and here
and I actually have a nice one
on the backside of this branch right here
that's coming out in the exact direction I want it.
I initially wanted it a little bit lower,
but this is still only about 10 inches above
where I initially had it.
So what I'm gonna do is rather than take out
this vigorous leader way down here,
I'll take it out just above this other branch
and I'll cut it about an eighth of an inch above that.
Gone.
And so now this is my new scaffold branch
going out this way.
So that's all the vigorous growth that was growing in here.
Another reason that was okay
is because this is on the northeast side of my tree.
So the southwest side that gets the most light coming in
is really open now.
So these branches down here where it gets the most light,
they're gonna fill in pretty quickly
and that's where I want my light coming in anyway.
If this was really vigorous on this side,
it might not make that same decision.
Okay, vigorous one's out.
Now I need to thin out this scaffold a little bit
so it's not too crowded
and take out any crossing branches that might rub later.
So all these branches in here,
these are growing in toward the center.
Clean up any of these.
Open up the middle here.
One's growing up toward the center.
Now the final step to pruning this tree
is to bring the entire tree down with some heading cuts.
And that's something that I do with all of my trees,
whether it's a one-year-old tree or a 21-year-old tree.
I'm making heading cuts to bring the size down in summer.
Summer pruning is for size management and size maintenance.
And on young trees like this,
I'm also creating some structure and some shape,
but always maintaining the size in summer.
So you can take it down really as much as you want
for a young tree like this.
Either one-third or a half is normally a good idea
for a young tree if you wanna keep it small,
but it kinda depends on how much growth you get also.
So I'm gonna be taking this down about half on these.
I'll probably cut it right around my belly button
since my first cut was right around my knee.
And what I'm looking for is an outward-facing bud
on these scaffold branches.
So I look at the branch.
I can see all these buds in different directions.
If I have a bud that's on the inside of the branch
and I cut above that,
that's gonna encourage a new branch from that terminal bud
to go inward or upward, but I want it to go outward.
So I'll look on this branch, I'll find an outward bud.
Or on this branch, you can see
there's actually another little branch
that's facing outward nicely,
and that's the height that I want.
So I can make a cut right above that outward branch,
and that will become my new branch, nice direction.
And I'll just keep going around.
This branch right here, I want it about that same height.
Got an outward branch and bud right there.
Good there.
Remember, this was the vigorous shoot
that I had in the center, and this is the terminal bud.
So I know a lot of the energy is going to this.
So one thing I can do to check that energy
so it doesn't become another leader again
is rather than trim it at the height
of all the rest of these,
I can bring it back down quite a bit further,
take it all the way down to there,
really keep it in check
and take some of that energy out of it.
Keep coming around.
I'll trim all of these similar heights as the other ones.
Outward buds or outward branches.
These are actually a little bit high.
Let's go there, this one.
There, above that branch.
We'll give this one another cut,
an outward bud right there.
All right, that looks pretty good.
Next tree in line here is my Flavor Delight Aprium.
It's an apricot plum cross, kind of like a pluot,
but a pluot has more plum characteristics
and some apricot.
This has more apricot characteristics
and a little bit of plum.
Just like the nectarine I just pruned, it's grown a lot.
I pruned it at 24 inches,
way down here when I planted it
and the buds have just put on tons of growth.
There's like probably eight feet of growth up here
and I should have checked the growth in spring.
That's another thing you can do
if you live in an area like I do in California
where these things just grow like crazy.
I could have pruned it a couple of months ago,
but I waited.
I pruned a little bit late.
I'm pruning a little bit late now.
Totally gonna be fine,
but I'm just gonna be cutting off more than half of this.
I'm probably gonna be cutting off
like two thirds of the growth on this tree
so I can bring it back down to size.
So one different example on this tree from the previous one,
this one has a very flat,
almost downward facing branch right here.
And so I wanna get rid of this
because although it would eventually produce fruit,
once there's fruit on there, it's gonna bend down
and it's gonna be way too low of an angle, eventually snap.
What I'm looking for are these nice 45 degree angles,
nothing too steep, nothing too shallow.
If I'm limited on the amount of scaffold branches
that I have left, I can adjust their angles
by either hanging a weight on them,
propping them up, pulling them together.
But ideally there's enough scaffold branches here
where I just kind of get to select
the best three to five branches
and remove anything that's either too flat like this
or too steep.
So this one I'll take
and I'll do another thinning cut right here at the collar
and just remove that completely.
Now this one has a lot of scaffold branches
in here clustered together, some of them crossing
and there's just way too many cluttering each other.
So the next thing I wanna do,
because there aren't really any parts of this
that are too vigorous, it's just too overcrowded.
So I wanna come in here
and I wanna choose the best three to five scaffold branches
and get rid of anything that's crowding or crossing.
As you can see, I've got one, two, three, four,
five, six, seven, eight scaffold branches
and this one is way too crowded
and these two are even crossing.
So that is a problem.
First thing I'll do is I'll remove these crossing branches,
cut them right at the collar right there.
Now I'm left with six, I want no more than five.
This one right here is pretty steep
and it's right between these two.
So I'll cut this one as well, right there.
Now I'm left with one, two, three, four, five,
they all have nice spacing and that looks pretty good.
Now I've thinned out my scaffold branches
but there's a couple more branches
kind of growing into the center here.
So I'll clean these branches up a little bit.
Now I'm just left with nice outward facing scaffold branches
and just like the other one,
the last thing to do is head them all off
at outward facing buds, just about navel height for me.
So I'm not gonna take them down by half,
it's gonna be at least two thirds of the way down
because these things are way up there.
So this one, take to,
actually take this to that outward branch right there,
nice bud here, branch there,
this one, looking across.
All right, one more down.
Next in line is this persimmon tree.
This is a Fuyu persimmon.
The persimmon trees don't need to be pruned
but keep in mind they grow really large
if they're allowed to.
So if it's in a backyard setting
and you wanna maintain it small like I do
with all of these with six foot spacing,
it needs to be pruned to keep it small.
So you can prune it to a center leader,
a modified center leader or an open crown.
I'm pruning all of these to open crown
because I just kinda wanna see what they do like that.
So this one hasn't put on a lot of growth
which really makes my job pretty easy.
There's a couple of branches here
that are going a little bit toward the center,
not as much outward.
So I'll start by just removing these,
these branches that are growing in toward the center.
Now I'm left with three outward scaffold branches.
I could just leave these as they are
because there's not a lot of vigor to check.
But what I'll do to keep kinda maintaining this shape
is this one's already nice and flat
and it's got a couple of buds here
so it's gonna branch well.
This one's getting a little bit vertical.
So I'll take it to another outward bud
way out here at the tip
and I'll do the same with this one,
just heading this off at an outward bud there
and just kind of roughly maintaining this shape.
So real simple with this Buyu persimmon.
Okay, let's switch it up and prune a tree
that's a little bit more complicated.
Most of these trees look really healthy.
They've got tons of vigorous growth on them
and there's a lot to remove,
a lot of branches to choose from compared to this one.
This tree, little peach tree just looks very sad
and it has since it broke dormancy.
So I don't know if it has a disease
that it had from the nursery.
I haven't really put in time
to determine what's going on with it
but it's had kind of yellow leaves
and has not put on much growth at all.
It has nice green leaves at the tip.
They're sort of curling up, not like peach leaf curl.
It's a different type of curl.
But anyway, it does not have the branching
like I hoped it would when I planted it.
I top pruned it at 24 inches like all the other ones
and actually died back the first about four inches.
So instead of having the three to five outward facing buds
to create those scaffold branches,
the top died back
and I only ended up with two scaffold branches here.
So I've got one going this way and one going this way
and a tree, unless it's an espalier,
needs more balanced branching than just these two branches.
But I wanna show you how you can correct that
if you still have a healthy tree
that only has those two outward branches
or if you wanna try to revive this one,
which I'll try for now and then we'll see.
So I'll bring in close to show you what I'm cutting in here.
Initially, this center leader went up
and there were branches here and here,
but this died back to here
and I'm left with these two branches.
So in order to make four branches,
I'm looking for this little branch here and this one here
and I'll trim off the rest of this.
And then on this side, I've got a branch here
and a branch here, so I'll trim off the rest of this.
Okay, yes, this tree still looks very sad,
but there's time left in the summer
to see if it's going to revitalize
and grow these nice branches out
or if it's just gonna kind of shrivel up and die.
I don't have a lot of faith in it
because I planted it dormant
and it's looked sad the whole time.
I think it probably has a disease.
The best thing to do is probably just take this thing out
this winter and replant it,
but I've got a few more months
to see if it turns the corner.
Otherwise, we'll start fresh.
Let's move on to the next tree.
Now for another unbalanced tree
that presents more challenges,
but at least this one is not unhealthy and unbalanced.
It's very healthy.
It's got tons of growth.
It's just not balanced growth.
And this is that jujube I was talking about.
Another one that I headed off way down here.
This thing has put on a ton of growth
and from your angle,
it probably looks like it's pretty well balanced,
but there's no branching on this side.
It's got two nice big branches here.
If there was a third one here, I would be so happy.
Unfortunately, there is a third one.
It's down here.
It's a little bit low.
It's not quite the right angle.
So it's put a ton of vigor of this direction.
It might be due to the fact
that I've got a hedgerow of tomatoes right here,
which is only a temporary hedgerow,
but I think it is probably due to an idea that I have
that jujube are not really designed
to be like an open crown tree.
I think they're more for a center leader
or a modified center leader,
but I'm experimenting here
to see if I can do an open crown thing with it.
And based on the fact
that it had so much vigorous growth this year,
I'm not worried about bringing it back down to size
and trying to push out some branches on this side.
So that's exactly what I'm gonna do.
I need to bring these branches down.
If I let them go, all of this energy is gonna go this way
and it might never balance out here.
So I need to help it balance out.
I'm gonna bring this way back.
I'm not taking off a half or two thirds.
I'm taking off like three quarters of this
down to right there.
Whew.
These things have thorns also, by the way.
And then I'll take this one way back to right there.
Look at that.
We got a tiny little tree again.
Hopefully it branches out this way.
I think it's going to.
I think it's going to,
otherwise we're gonna keep pushing it.
I'm gonna make this thing a center leader jujube
whether it wants to or not.
Unfortunately, it cut off most of the fruit,
which is fine.
I haven't really talked about fruit thinning,
but I don't want any fruit in the first few years.
A little jujube fruit, one of these on here,
or it looks like two.
It's not gonna take a ton of energy, so I'll leave them.
All right, let's do like one more tree.
And then I'm gonna go over some frequently asked questions
about pruning, specifically summer pruning.
Before I get to the last tree that I'm pruning today,
I want to stop here at this fig tree.
This is a panache fig,
and I actually propagated this fig
from a cutting of a different fig tree
at my previous urban farmstead,
and I planted it this spring.
It was about eight inches tall.
I topped it right there,
and it's put on three really nice,
well-balanced scaffold branches.
It's grown very vigorously,
pretty much up to shoulder height right now.
And I could prune it right now if I wanted to,
but I almost never prune my fig trees in summertime.
I like to wait till winter,
and the main reason is that I like to propagate more figs
from hardwood cuttings.
So if I wanted to, I could prune this right now.
I would just cut it at some outward-facing buds
and bring it down to about,
you know, bring it down about halfway.
But I'll wait till winter.
I'll probably prune it right about here in wintertime
after these leaves come off,
and I'll propagate more cuttings from it.
But fig trees are super forgiving with pruning.
You could cut this thing all the way down to the ground.
It's gonna grow back,
and it produces figs on first-year wood.
So you can prune them any shape, any size you like.
This one, I just wanna keep it small in this row of trees.
This is my apple tree.
Apple trees are most commonly pruned
to either a center leader or a modified center leader.
So when I went and hacked it off at 24 inches
to create all this outward branching,
that was not really a common thing to do.
But as you can see, it still looks really healthy,
and it actually kinda looks like it would be
really good for an espalier tree,
which would be pretty cool.
But that's not my plan for it here.
Really, I just want it to go along
with all of the other trees in this row,
and they're all pruned to open centers,
so I was going to do that.
But as you can see,
compared to the other trees that I've pruned so far,
even though it's branching a lot like them,
all of the branches come out, and they go straight up.
And that's a characteristic of apples and pears,
and that's one of the reasons they're not commonly pruned
to an open center, because their branches wanna go up
rather than out, so that's normally why they're pruned
to either a center leader or a modified center leader.
So today, I'm gonna prune this thing
to a modified center leader.
I'll leave a few of these lower branches
to be its lower scaffold.
I'll choose a center branch for its center leader
that I'll top for an upper scaffold,
and then we'll just kinda clean up the rest.
As I come in here, I'm really just looking for branches
that are coming out in different directions
and thinning anything that's in the center.
Okay, so now I have my outward branches,
which are all of these ones,
and my center leader, which is this one.
So first, I'll tip all of my outward-facing branches
to outward-facing buds,
and that will produce an outward-facing branch.
Now, with my center leader,
I wanna top it at a good height
for my next scaffold,
somewhere around shoulder height here.
Then, I'll just remove this wonky branch.
And that's it.
The most frequent question I get about pruning fruit trees
has to do with timing,
and it's usually people who wanna know
when is it too late to do this type of pruning.
Either you're watching this in summer,
and you're wondering if you can just wait
and do all this pruning in winter,
or you're watching this in winter,
and your trees have already gone dormant,
and you're wondering,
okay, I missed my summer pruning window.
Should I go ahead and do this pruning now,
or should I wait until next summer?
If it's summer still, do not wait.
But if it's wintertime,
and you missed that summer pruning window,
I would say go ahead and prune it now.
It's better late than never.
But the reason you don't wanna wait
if it's an option for you
is because as these deciduous fruit trees transition
from summer to winter,
in fall, they transition all of this food energy,
all these leaves, as energy into their root system.
So if I don't prune this,
all of this goes into the roots.
Then it's stored in the root system.
Then in wintertime, when this is dormant,
I'd come in and I'd cut this down by half.
I have a disproportional amount of energy
stored in those roots.
So come springtime, when this tree hits bud break
and it warms up,
I'm gonna get all of that energy rushing back.
It's gonna create a huge flush of growth up here,
super vigorous, and I'm gonna get
all this vegetative growth
that I don't want for my fruit tree.
So that's why you definitely wanna make those cuts
in summertime to bring the size down if you can.
So this O'Henry peach has maintained
a pretty well-balanced shape,
has a couple of branches
that are a little bit more vigorous,
but they're still at a good angle.
They're still good scaffold branches.
So all I'm gonna do is take out
some of this center growth,
kinda clean up the center,
keep it nice and open for sunlight,
and then I'll come around
and I'll tip all of these branches
at outward-facing buds.
All right, looks pretty good.
This is an Asian pear,
and although I topped it at 24 inches
at the same time as I did all of the other ones,
it's doing a couple of things
that the other ones are not doing.
For one thing, it's growing very vertical
rather than kinda branching out,
and that's a characteristic
of pear trees and apple trees.
So I let this thing grow a little bit too long.
Ideally, while it was growing so vertical,
I should've checked its growth in spring
to prune to these outward buds
to really push it outward,
but that's okay.
I can still do that right now.
So I'll look for these outward buds.
I'll cut right above them,
and I'm gonna push some branches
outward on this thing,
even though it doesn't want to.
It's gonna work out.
It's gonna go outward.
The other thing I'm noticing on this
that you might see
are these sprouts coming in way down here.
If you look closely,
you can see this little dog leg right here.
This is the graft union.
So this is the scion.
This is the variety that I want.
This is the rootstock.
So these sprouts are actually coming
from the rootstock,
and these are called suckers.
These should be removed anytime you see them.
It doesn't matter if it's spring,
summer, winter, or fall.
They're gonna be most common
on apple trees, pear trees,
and very common on citrus.
You see any sprouts coming
at the base of a tree
below that graft union,
take them off right away.
Look at the size of this Spice Z nectar plum.
This thing is enormous.
It's almost 11 feet tall,
and I pruned it down to 24 inches
when I planted all the rest of these.
So it's grown nine feet almost
in the last four months.
Just insane.
And that brings me to a question
that I get a lot about rootstock.
People want to know,
should I buy a tree that's on a dwarf rootstock
or a semi-dwarf rootstock
so that it will stay small?
And my advice would be,
if you find the variety that you like
on that rootstock,
go ahead and buy it.
But don't wait or settle
for a different variety
just because you want that dwarf rootstock
or the semi-dwarf rootstock.
Because all that means
is that it's a less vigorous rootstock,
which will create a less vigorous canopy.
You'll still have to prune it.
You just prune it less.
So either way,
you're gonna have to prune it.
So find the variety that you want
on the rootstock that it comes on.
If it's dwarf or semi-dwarf,
it's great.
It's gonna need a little bit less pruning.
They're all gonna need pruning.
Just find the tree that you want
and prune it down.
Just like I have to do
with this massive Spice Z nectar plum.
The other ones I took down by about half.
I'll probably take this thing down
by almost three quarters
because it is so vigorous.
Wow.
So I'll start by removing
any of these center branches.
Now with the canopy opened up,
I wanna prune to outward facing buds.
Well, that's it for this first summer pruning.
And it looks like a slaughterhouse out here
with all these giant limbs down.
It probably looked like quite the massacre
as I was lopping off so many large branches
from these trees.
I know it's a very intimidating thing,
especially beginning as a gardener
to do this kind of massive pruning like this,
but it's necessary.
It's helpful.
The trees will love you for it
and they'll produce a lot of fruit
many years to come
and they'll be maintained small
so that you can grow them close together.
But don't take my word for it.
Subscribe and you can see
all of the other upcoming videos
because I will be following the full life cycle
of this orchard.
Just like four months ago
when I posted the initial video
from planting and planting
and soil prep and irrigation
and pruning all these down to 24 inches
and you all thought it was crazy then
for lopping off so much.
And here I am again,
lopping them way back down again.
I know it's kind of hard to see
the details of the pruning this time of year
when they're all full of leaves
and that's probably why you don't find
a lot of videos online
showing summer pruning
because it's hard to see those details.
So if you have any questions
about things that weren't really clear
in this video,
be sure to ask them in the comments below.
If you wanna follow along
and see what this orchard looks like
one year and five years from now
and see everything that I do for it
and of course those harvests
that we all can't wait for,
be sure to subscribe.
I'm also gonna be making a lot more
upcoming videos for my new urban farmstead.
I'm building eight raised beds back here
and all kinds of stuff.
So subscribe if you wanna see those.
If you enjoyed this video,
hit that like button.
If you have any questions at all
about my garden
or any questions about your garden,
ask them in the comments below.
Happy gardening everyone.