My no1 overhauled supersonic rev first few shots after winter part 1

Exploring Ancient Crossbows
3 followers
Aug 21, 2025
My no1 overhauled supersonic rev first few shots after winter part 1
Got old faithful out for a play.
Two rats coming out but they're hiding up now.
Still got the same string and cables in it.
Not the slightest bit of wear.
I can't remember how long ago I made these bolts but, and I dread to think how many times I've shot them.
They're still as good as the day I made them.
Must look after your fletching.
This is why I had to make them so long.
Because this bloody thing is so powerful.
So I don't bury them in the target.
There's one thing I don't like about them tacticals are them 10 inch bolts.
Imagine if I shot one of them in this.
I'd never find it.
Had to go through the target, through the fence and see you later.
I haven't done much of this in a while.
This thing.
Has just tickled me pink for so long now.
Since I've done everything I've done.
310 grain.
I think the last time I crew made them they were doing about 283 feet per second.
These ones are 260 grain.
You wouldn't want to stand in front of it would you?
There's one of these three and I think it might be this one.
Not quite as accurate as the other two.
That one goes a bit loud number three.
I don't think that shaft is quite as straight as the other two.
Let's eat.
Almost.
Number two and number three are a little bit low and then number one in that set is a little bit high.
But these two.
I was literally aiming at that white dot.
I was aiming at that white dot.
I've got my little piece of silicon pipe here.
So I can pull the damn things out.
Even them broadheads don't really damage this film very much.
They grip in there don't they?
If the rats come out and play.
I've got my trial cam in there and some food inside.
And they get popped through the holes.
We will wait and see.
