Oil Paintings NOT Easy | Try Bob Ross Valley Waterfall).f270

Landscape Oil Painting
5 followers
Hello and welcome back to the studio. Today's Bob Ross classic is Valley Waterfall. It's a
smashing painting, lots and lots of bits of detail into it, a nice mountain, some fir trees and of
course the waterfall. I pretty much get it right first time. I've made a few little mistakes but
not too many. I made some changes of course to suit my own particular style. I did have a bit
of a happy accent and I used this to fix it. But what is this? Well I have to watch the video to
find out. So sit back, relax like me with a nice cup of tea and see how we get on. Happy painting
people. Here's my canvas. Today I'm using black gesso. I've got it on a plastic plate and I'm
going to use a small foam brush. I'm going to take just a small amount and I want to lay out an area
that's going to accommodate a mountain about the same size as my hand. I just put a few
buff marks on first of all just to get an idea of layout and scale. Once I'm happy with things
I can go back in and make it a little more permanent and a little darker. I like to mark
out the position of my waterfall at this stage. I don't want to run out of space. I leave a little
gap on the canvas. This will be just visible throughout the course of the painting. Now let's
finish blocking in the rest of this background and maybe adding a little more details to those
background trees. Take a little more paint on that foam brush and then just turn it on a corner.
By gently tapping you can sort of rough in the shape of these trees.
Don't worry if they're not perfect. At this stage it's just for position and a little bit of scale.
I'll add one on this side and maybe a couple more on the other side. I'll come back and fill in the
rest of it with the foam brush just blocking in even quite roughly. I've left my canvas to dry
completely but now it's time to put some oil on the canvas. In this top section I'm going to be
using some Bob Ross liquid white oil paint. In the lower section over the black I'm going to be using
some Bob Ross liquid clear. I'm going to need more brushes this time so I've got a nice brush
and two older brushes. One for the liquid white and one for the liquid clear. I also have a liner
brush, a fan and a filbert brush and of course a Bob Ross palette knife. I'm going to start with the
liquid white. I keep it in a small airtight container for ease of use. Just apply a very
small amount to this area. There's not much canvas to cover so don't overdo it. Keep it very very thin.
It doesn't matter if you go over the edges of the trees as well at this stage.
If they look a bit misty and murky that's absolutely fine but just make sure you test
your canvas and make sure it's not too wet. I have some how-to videos about liquid white
and liquid clear and I'll put them down in the description below. Now change brush get a clean
brush for the liquid clear. This wants to be applied very sparingly and scrubbed in over the
where it meets the white just push the two together. In fact the liquid clear can push
the liquid white out the way and the test is quite simple. Just run your finger around it
and make sure you can't leave any sort of mark. It wants to be very very thinly applied.
Here are some links to the how-to videos. I'm going to paint my sky first. I'm using my liquid
white brush and a very small amount of phthalo blue and because there's a mountain here in the
centre and not much sky I'm going to start here. At least if the area is too blue it doesn't matter
it'll be under my mountain but I want it a little bit paler at the corners so I let the liquid white
dilute my colour. I paint this sparingly again. I let some of the liquid white appear as clouds.
There these are some of the easiest clouds you'll ever paint. I switch brushes now back to the
clear brush and I brush mix the phthalo blue and phthalo green together. Just let the colour drift
up over the edge of these trees. It doesn't matter if a little bit gets into the background
it all works well in a sort of a misty green effect. Now make sure you test your canvas.
Touch your fingers to it and make sure you get a good strong colour.
That's more oil than colour and won't work very well at all. I especially make sure I've got
plenty here where I'm going to have the waterfall. Time for a mountain. Pull out your black nice and
flat and take a small roll of it on the palette knife. I want to position this peak a little to
the right not too close to the top edge of the canvas more like a sort of teepee shape. I can
change it later on. I'm using this just for position. I'll add a couple more peaks to the left
and another one to the right and once again don't worry too much about the trees. We'll come back
and fix them later on. But I am scraping out the excess paint. Here you see I've changed the shape
of the top of the mountain a little bit and I'm always scraping out the paint. That's a clue to
painting good mountains. You don't want a lot of excess colour on the canvas. I'm using my liquid
white brush here just to remove the last of the paint. The canvas is very dry at this stage.
Now a small amount of titanium white with a little bit of phthalo blue and maybe just a
touch of black just to grey it slightly and I leave it sort of marbled. Don't over mix it.
That'll be my shadow colour. My highlight is straight titanium white and I pull it down very
flat. I slide up and gather a small roll of paint about as big as a cocktail stick. Now point to the
knife to the tip of the mountain and kick that handle away from the mountain. You want to make
sure you follow the line of the mountain here. Top tip don't leave a black outline to your mountain.
It looks like it's been cut out of a book or a magazine. Let the paint break as you slide down
the mountain. I reload some shadow colour for this left side of my mountain. The sun is coming from
the right in my scene. As you see I bump against the white and slide over to the left. This doesn't
take very much paint. The idea is to add some highlight and some shadow but not to replace
all the original dark colour. Keep on adding successive layers of white and shadow building
up your mountain. Hold the knife extremely gently at this stage. You just want it to
float across the canvas and break. Gentle as a whisper Bob used to say and he was right.
I'll add some more shadow here and then maybe a little bit more highlight over to the other side.
There quite a mountain range in such a small area but I'm especially careful not to put too much
paint on at the left right and the base of the mountain. I shaped my mountain to a sort of a
bowl shape but didn't lose all these lovely dark areas. Now time for some evergreens. I take black,
phthalo green and phthalo blue and a little crimson and mix it all together. I want a dark turquoise
green colour. There that's about right. I switch to a fan brush. I go through both sides give the
brush a little wiggle as you go to bring it to a chiseled edge. Let's improve these fir trees.
I leave a few of the blurred background ones just for a bit of depth and distance.
I leave a little bit of the green colour showing through. I think that works quite well
too. So all I'm doing is really adding a third layer of information for your eyes.
Some of these fir trees can have a little more detail and I tip my brush over on its corner
and I tap with a bit of a downward action to bend the bristles and make a downward sort of
facing tree. I'll make this tree a little bigger to catch that little bit of black
gesso that was showing behind the edge of the mountain. That looks about right. Now take a
little bit of grubby white on a fan brush. A few upward flicks looks like snow between the tree
trunks. Now I switch back to my one inch brush that had the liquid white on it and go through
I push the brush forwards in the paint. Notice how it leaves a little ridge on the edge of the
palette right ahead of the bristles. Now underneath that snow line, touch. That little line of paint
on the palette is mirrored by a little line of paint on the edge of the brush. As you touch,
it leaves a little highlight. Start just under the snow line and work down towards the top of
the waterfall. As you come down, you can tip the brush slightly over on a corner.
It gives you a nice sort of roll to the edge of the land by following the lay of the land.
I tap a few more times here, but we'll see that might be a mistake, actually. No,
this should be going slightly uphill because that's where the waterfall is coming from.
Let's correct it. I got my liquid clear brush which had the green and the blue on it. I just
tap it out. I like to decide where my waterfall is going to be. I knew where the top of it was
because I left a little mark on the gesso. Now I'm measuring how far down it will go
and how far to the left and to the right. These little marks will disappear when I put the
brush into a little bit of liquid white. The paint we're going to apply needs to be soft.
It needs to flow nicely. I put out some more phthalo green and phthalo blue and I groom it
well through the brush, maybe adding a little more titanium white to lighten it slightly,
but there's quite a lot of liquid white in this mixture. Ready? Hold your breath.
Now, with firm pressure, you want to just really lean on the canvas and then practice that stroke
a couple of times like a golfer would do a swing and then, well, time to go. Touch,
press, pull, nice little angle to it and get ready, get ready.
Yep, Bob loved his sound effects and they work really well. Let's add another stroke.
This is a lot of fun and it really doesn't matter if you get it slightly wrong because
you can fix it easily. It's gone a little wider than I thought it should be, but that's okay,
I'll just cut it back a little bit. I want to make that a little stronger in the center,
so I just turn my brush at an angle as I come down. Time to add some splash and crash.
I go into the titanium white with the corner of my one inch brush and just press it open to
splay it apart and then just in here, hold the brush at a downward angle and tap. Let the bristles
open up and leave lots of little speckles, dots of color. We'll enhance it later on.
I've gone back to my one inch brush which had all the lovely grassy colors on
and this time I'm going to go back into some ochre, indian yellow and cad yellow.
Press, get a nice line of paint and as you see I'm going to build a riverbank coming
from the other direction to hold the side of the waterfall in.
Once again, tap, add fresh paint to your brush on a regular basis and use that right hand corner
maybe a little more, so just angle it slightly over. This is a neat little technique and one
that some people sort of struggle to get right. I tap on the corner of my brush and turn the angle,
trying to avoid it looking too stripy. As you go downhill, you can just cross the edge of
waterfall and trim the edge off a little bit. Told you there was a neat little trick to pushing
the waterfall back in our painting. I keep adding highlights to my painting, allowing them to run
out as they reach the base of the falls, just beside the splash and the crash. I don't think
there'll be a lot of light down there. Top tip here, get things in the right order. I need to
pull the reflections down under the waterfall before I put in a bank on the right hand side.
If I put the bank in first, then as I pull down, I would bump into the grass.
Notice how I press downwards with a firm action. I'm using a fan brush here with a small amount
of off-white paint, a bit more bluey in colour, just to sketch in the idea of some nice little
ripples. Once I'm happy with the position, I'll go back and make them a little stronger and a little
brighter. I think that's about right, so slightly stronger here, maybe in the centre directly under
the falls. Yes, I'll go back in and improve that area later on. I like to add a few little bright
speckles to my waterfall using the edge of the fan brush too. As I mentioned at the beginning,
my waterfall grew a little wider than expected. I need to trim some off and it's easy to do with
a palette knife. I'll take this section away. If you enjoy my tutorials, don't forget,
like, subscribe and leave a comment. You can even buy me a tube of paint,
link down below in the description. Thank you.
Time to freshen up my palette. My yellows and greens have become sort of one green colour,
like camouflage green. It really doesn't help my painting very much at all, so I gather it up
and dispose of it. I know, it looks like a waste and it's so tempting to carry on using that colour,
but trust me, I think I've ruined more paintings through being miserly with colour than enough.
So, dispose of it and put some fresh colours on your palette.
In the blink of an eye, we're ready to go again. I dry clean my brush a little as well.
So, some fresh cad yellow, fresh Indian yellow and some sap green this time. I want a change
of greens as well. It helps to change up your colours regularly throughout your painting so it
doesn't get too samey. Notice how I push the paint ahead of the bristles and make a nice little bright
edge. I tap gently at the top of the falls to leave a bright little highlight. Once again,
remember how to turn the brush at an angle and tap downwards. Leave a few dark areas here and there
to add depth and distance in your painting. Reload frequently and work down and away from the top of
the falls, adding more and more layers of colour as you go. Now for some filbert brush rocks. I know
you struggle with these occasionally, so watch carefully. I go both sides through black paint
with my filbert brush to really mat the bristles together. It should be really well stuck.
Make sure you groom it thoroughly. Now, on one side I go through some sienna, some grubby white
paint and a little ochre, but don't overmix it. Leave it sitting nice and thickly on one side of
your brush. Now, remember, the light is coming from the right and from above, so I want the highlight
to the top and the shadow to the base. Think about starting further up the falls and touch
and press and make a little sort of curving sort of action with the brush. It leaves a highlight
and shadow all in one. This takes a little practice. Reload your brush frequently and
add more dark and more highlight, but see I just do one swipe through that highlight colour
and then light touch and give a little twist as we go. Use the shadow that you just created
under the highlight against the next highlight. So you see in here there's a little bit of shadow
there and I come in just underneath it with a little curving action. I find this technique
makes great smooth looking rocks and boulders. I think they call them river stones. I'll try using
the technique to create some bigger stones down the sides of my folds, but I've got to say I
rather like doing that with my palette knife, but well, let's give it a try. No, it doesn't quite
work for me, I must admit. No matter how hard I try, they just don't look quite right, so I scrape
them off with my palette knife and go back to my old faithful way of doing it. Some black on the
edge of my palette knife. I'm using just a small blade here and with a very light touch I just
block in where I think those nice craggy rocks should be. Let it overlap into some of the green
areas at the sides of the folds and make sure these rocks are taller than the top of your folds.
Mother Nature wouldn't like it if they were below the edge of the folds.
Water would just run over the edge, wouldn't it? I use the same highlights on the edge of my palette
knife and just take a small roll of sort of roughly mixed colour, a marble mixed colour.
Now see how lightly I hold my knife, just a finger and thumb, my other fingers just float in the air.
I want to let this paint break and just follow the line of the stones down the edge of the folds.
This is another great way of trimming back the folds if they got a little bit wider,
just make the stones overhang a bit further. I'll add a couple more stones to my waterfall.
That's lucky, there's a nice dark hole just there. Perfect. Now to settle those stones back into the
waterfall, again use the edge of your one inch brush, well loaded with some highlight colour,
greens and yellows, and just touch over the edges of those dark rocky stones. It really makes all
the difference to your painting. I was having so much fun with the waterfall I nearly forgot
about these trees. Let's go back and repair them. I'm using that dark green colour we mixed up
earlier on and with a fan brush I'm just going to go back in and retouch some of these branches.
That one looks rather nice there. It just goes over the edge of my mountain.
Remember I didn't put too much titanium white there did I? Now you know why, that tree would
have been very difficult to paint. Now this tree here, it's gotten very close to the top edge of
my canvas, it's almost holding the edge of the painting up and oh dear, whoops, I made a dirty
mark there. I'm going to have a neat trick to fix that. So how are we going to fix that mess?
We could attack it with a baby wipe and start scrubbing off and trying to overpaint it but
I can guarantee things will just get worse. So sit back and watch carefully, I've got something
special I'll show you in a moment. So the tree that's close to the top of the canvas,
I make sure goes off the edge. Right, now for that special tool, it's called a clay shaper.
It's actually used for modelling clay work but it acts like a little window squeegee
and some firm pressure, really press and a little swipe and nearly all of the colour comes off in
one go and in the blink of an eye, a quick bit of work with my fingers just to blend it all together
and just like magic, it disappears. I'll leave a link in the description so you can go and order
your one now. It's an affiliate link, you don't pay any extra but I get a few pennies as a thank
you. Let's add some highlights. I've gone into my yellows and green colours with a fan brush.
It was the one I originally painted the dark colour on with, I just dry cleaned it.
Now remember, light's coming from the right hand side so that's the brightest side of my tree.
I add a little bit of liquid white to my colour occasionally just to soften it and make it stick
a little easier. It also makes the highlights really pop on that side, doesn't it? In the centre,
they're fairly dark and towards the base of the trees, I want to keep it nice and dark.
I vary my colours. This tree has a little more yellow ochre in it.
Again, lots of different varieties of green is essential in a painting so it doesn't get a bit
too samey. I'll even throw a little sparkle down here. Now let's put some highlights on that
waterfall. I'm sort of not too keen on this sort of green colour that Bob had in his original
painting so this is my own little touch. With the edge of my palette knife and a little bit of
titanium white, sort of with a little bit of blue mixed into it, I add a few little sparkles.
Then, using my fan brush, I do a few little highlights on that little edge here where the
waterfall sort of tips over. Again, it's my own little touch but I think it improves the
slightly and suits my taste better but you decide for your own painting what you prefer.
Finally, I enhance those little splashes a bit more
and I think we're not far away from a finished painting.
So there's my version of Valley Waterfall, a lovely Bob Ross classic
and one that you should paint next but if not, here's another one for you to try.
