15 Video Views·Aug 14, 2025
"Unveil the secrets of gem cutting as I take you through the fascinating process of designing and faceting a gemstone with the legendary Flower of Life pattern — one of the most iconic symbols in Sacred Geometry.
In this video, you’ll witness the full journey of transforming rough Brazilian amethyst into a brilliant gem that visually represents the Flower of Life — a pattern made of overlapping circles that has appeared in spiritual, religious, and architectural traditions across civilizations. This mesmerizing design isn’t just beautiful; it’s mathematically precise and symbolically profound.
Inspired by the works of renowned master cutters like Mark Oros, Victor Tuzlukov, and Andrew Brown, I take on the challenge of creating my own version of this faceting design. I carefully reconstruct the geometric blueprint based on the original sacred drawing, then adapt it for gemstone proportions using precise mathematical adjustments and fractional indexing on the faceting machine.
You’ll see how to:
Translate a 2D Flower of Life into a full 3D faceting design
Generate a base of equal rhombuses to serve as a framework
Build micro-facets on the rhombus edges to form the finished design
Use Gem Cut Studio and GemCad in tandem to achieve high accuracy
Preform the stone with a CabKing machine for fast, efficient shaping
Apply meticulous hand faceting and polishing techniques.
Create not only a large central gem (25 mm) but also three smaller matching stones (16 mm) for a complete jewelry set.
This project is as much about art and symbolism as it is about precision engineering and gem cutting. The faceting process reveals how light interacts with geometry, producing reflections that reinforce the Flower of Life’s harmony and symmetry.
Through careful planning, digital modeling, and physical craftsmanship, we bring this timeless symbol into a wearable form — perfect for custom jewelry or collectors of meaningful gemstones. Along the way, you’ll gain valuable insights into advanced faceting methods, the balance between machine power and manual skill, and the joy of watching sacred geometry come alive under your fingertips.
If you're a gem enthusiast, lapidary artist, or admirer of metaphysical designs, I'm sure you'll enjoy this video.
📺 Please don't forget to:
Subscribe for more in-depth gemstone cutting projects
Like & Share if you appreciate the art of gem faceting
Comment your questions or thoughts on sacred geometry in gemstone design
Visit my website for more precision faceted stones, commissions, and exclusive cuts: https://egorgavrilenko.com/
💠 Let the Flower of Life inspire your next creative or spiritual journey — in stone.
You can also see some other videos related to the gem cutting process described in this video:
Using a Photograph for Gemstone Designing: • Precision faceting process: Using a photog...
Fast preforming round-shaped gemstones: • Gem faceting: Preforming round stones on U...
Beautiful transformations on 36 gemstones, from rough to faceted: • From rough stones to faceted gems: The mag... "
Hey guys, in this video I'm going to show you the process of designing and faceting of the famous
flower of life pattern. The flower of life is an ancient geometric symbol that has been found
in various cultures throughout history. It consists of multiple evenly spaced overlapping circles
arranged in a hexagonal pattern forming a symmetrical and harmonious design. This symbol
has been widely recognized for its intricate beauty and deep historical significance. I have
seen some beautiful gemstones with the flower of life pattern and have always been fascinated by
them. Master gem cutters like Mark Oros, Viktor Tuzlukov and Andrew Brown used it in their
magnificent creations. Among Andrew Brown's faceting diagrams you can find a free version
of this design. So when I had a request from a customer to make a gemstone with this design
I accepted the challenge. I decided to make my own faceting diagram for it using fractional indexes
so that the faceting could follow the original pattern more accurately. The faceting of this
design is usually done in two parts. First a pattern of rhombuses is prepared to serve as
the basis for the final diagram. These rhombuses are left with a matte surface unpolished. Then
in the second part small polished facets are added on the edges of the rhombuses to create
the final flower of life design. It is crucial to prepare a correct pattern in the first part
so that all the rhombuses are the same size when viewed from above. If this is not done
the imaginary circles of this pattern will not be the same size and the entire design will lose
its symmetry and appeal. To prepare the diagram for the first part I started with the flower
of life drawing and traced lines through the centers of the circles. Then I erased the unneeded
lines to achieve the rhombus pattern for this design. With this drawing ready I went to the
GemCAD Studio program to create the corresponding cut diagram. If you don't know how to use an image
to design cuts I have another video on my channel that explains it step by step. Unfortunately
the GemCAD Studio does not allow you to work with fractional indexes so for a better fit of the
facets to the drawing I had to use the GemCAD program as well. And finally we have our diagram
for the first part finished. In the second part we are going to add polished facets that make the
final flower of life design. To do this I use the same initial image to arrange these small facets.
Again I use both GemCAD Studio for the initial design and GemCAD to place more precise facets
with fractional indexes. This way I have completed the faceting design for the second part.
Which corresponds to the final flower of life pattern for my gem. Finally the computer work is
done and we can get to cutting on the faceting machine. I have a nice piece of amethyst from
Brazil very clean and with a beautiful color and I'm going to use it to cut a large flower of life
stone about 25 millimeters in diameter. But first I'm using my capking machine to quickly preform
the rough amethyst into the approximate shape of the future stone. This machine has a much more
powerful motor than faceting machines and I can remove large pieces of stone really quickly,
remove fissures and inclusions and take advantage of areas with better color. Here we can see the
stone already glued to the top and rounded on a 360 grid disc ready for pavilion faceting. I cut
and polish the facets of the pavilion using cerium oxide on the creamway lap. You can see that
I use a simple cone shaped pavilion. I don't want to use any more complex faceting here.
I just need a light reflector to highlight the pattern of the crown facets.
Now the pavilion is ready. We can make the transfer and start working with the crown.
The really delicate work begins now. Here the stone is already attached to the dop on the
pavilion side. We begin to work on the crown. First of all I am going to shape it a little by hand
to give it the approximate dome shape more quickly. To do this more accurately I use my automatic
rounding method as explained in another video on my channel. These additional steps in preforming
the crown allow me to remove a lot of material quickly and accurately, bring the stone closer
to its final shape and save time on faceting. The crown is now quite close to its final height and
shape so I'm going to start cutting the first facets. My cutting procedure in this case is the
following. First I cut the six facets that meet at the apex of the crown using my machine to
achieve the centering. Then I add two more tiers of six facets each with the size that corresponds
to the length of what I call the guide rhombuses. In the rhombus pattern diagram we can see these
three rhombuses that will determine the size of the circles that will appear in the second phase.
And of course the other rhombuses on these three guide tiers. Their size is what we have to
calculate for our stone size. Also taking into account that we want these three rhombuses to
have the same length when we look at the stone from above. This means that if we measure their
actual length those that are further from the center and are more inclined with respect to
the central axis must have a slightly greater length. We can even calculate the exact length
they should have using an excel worksheet since we know their angles of inclination. This way
when cutting these first three tiers we can measure them exactly with a micrometric loop
to establish the basis of the future design with precision. Also some space will be left in the
outer circle of the stone near its girdle to create a frame for the flower of life pattern.
Once the first three tiers are established we begin to add the other facets of the diagram
to create a pattern of equal rhombuses. We start from the center of the stone and advance toward
the border. The midpoints between the facets will guide us through each step of this process.
Finally the first phase of faceting is complete. We check the result and if necessary make some
corrections before moving on to polishing the facets of the final diagram. Before moving on
I also polish the facets of the outer circle so that we can then see how our final design
is taking shape within this frame. And finally the first phase is complete. Everything is ready
to move on to the final faceting diagram. These facets are so tiny that I print the crown diagram
in large format to not get confused with the facet numbers. We have to pay extreme attention
when polishing these small facets almost all of which have fractional indexes. I start the process
from the center of the stone and make these small facets directly on the polishing lap.
Again I use the cream whey lap with cerium oxide. If we make a mistake at this stage we have to go
back to the previous diagram to fix it and we will lose a lot of time. This is the most exciting and
rewarding moment in the entire process of making this cut. We see how the pattern is generated
from the center of the stone and expands outward like life itself flowing from its point of origin.
our gem looks like after making the last tier of facets still mounted on the machine.
I take it out of the machine and observe it. To see its true brilliance we have to remove it from
the dope because the glue prevents the pavilion from reflecting light properly. I will show you
the finished stone at the end of the video. But first we have to do some more faceting work.
It turns out that my customer also commissioned me to make three smaller stones with the same
pattern each measuring 16 millimeters. I'm going to make those two and then I'll show you the whole
set. The procedure for cutting these smaller stones is the same except that in the first step
I only set two main tiers not three since the pattern will be smaller. Then we create a rhombus
pattern and finally polish the small facets on the edges of the rhombuses to create the final flower
You can see that in this case we have the central circle and only one additional ring of crossed
circles. If we were to cut the complete diagram on a stone of this size the design would be too small
to see clearly. Here we have another stone ready but still attached to the dope. Notice how because
it is still glued it does not shine as brightly as the other stone of the same cut that has already
been removed. This is what happens when we fast stones. We never see the final result until we
have removed the stone and cleaned off the glue. Now the work is finished. Here are all four gems
from this set together. I hope you like them as much as my customer and I do. Another new
representation of this ancient symbol full of meaning cut in natural amethyst from Brazil
ready to be used in a spectacular and unique set of designer jewelry.
I hope you enjoyed this video. Please subscribe to my channel and visit my website
to see my other faceted gemstones. See you in the next video.