I faceted this purple stone and turned it into a beautiful piece of jewelry (What do you think of this craftsmanship?)

Rocks and minerals
9 followers
3 Video Views·Sep 28, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThe video demonstrates the professional process of cutting and polishing an amethyst to create a custom pendant for a client's granddaughter. The artisan guides the viewer through the technical stages of lapidary work, from the initial rough grinding to the final polishing, emphasizing the precision and patience required to transform a raw gemstone into a high-quality piece of jewelry.
Hello everyone watching the Adriano Pedras Preciosas channel, today we're going to do a special cutting.
A lady wants to give her granddaughter a stone as a present to make a pendant, so I have
I don't have that amethyst in the size she wants right now, so I'll make one for her.
I'll use a 600-disc to do the first roughing on one of the three pieces, then make the table.
I'll tell the story here, and you'll see whether the stone turns out well or not.
Now I'm going to use a 1500-grit disc to remove the scratch so it'll be easier to polish this table.
What is the base of every engraving? Now I'm going to apply hot glue; that's sealing wax. There's also cold glue.
In some countries where it is very cold, hot glue can crack, and if the stone is also
A crack inside it could cause a defect, so since the yolk is pure, there's no danger.
I've centered the beam; I'll make all four corners at 90 degrees—this piece is for you to climb up.
coming down here is a brake, a throttle, and there's also a rotation that spins in both directions because
When you're polishing a stone, there are some stones that only polish on one side, and there are others that polish on both sides.
The other side is very important—you must have this tool to turn both ways precisely there.
Now I'll measure to make sure it's good to always leave it at exactly 12 millimeters by 8, to keep it precise because it stays that way
But it's easier for the jeweler here; I've already done the four corners, and I'm going to do the rest now.
Here to make sure it's all set to start the polishing process, okay, I'm ready, everything's all set.
The lowest degree I left is 42 degrees; I'm going to start with 42 degrees there, which I'm going to do the
The facets of the pavilion take time, it's not that fast. I had to speed it up. I'll show it to you right there.
Right away, that's what's going to reflect upward; let's switch it now and clean this piece thoroughly.
Little dirty one, wipe off all that dust from the stone powder that mustn't get wet, they're going to put wheels on it.
Polishing exists in various types of polishing wheels; I'm using this one now, and I'm going to use aluminum oxide next.
Diamond powder mixed in to give this stone a special shine will result in a diamond-encrusted stone.
It's as if it were a diamond-studded amethyst; I've already started the initial polishing. If you don't
It is registered on the channel Adriano Pedras Preciosas, subscribe to the channel here, there is a video teaching
I can identify any type of stone, any type of rock—I have experience in the field, really.
With mining, prospecting, and here it's a hobby during my free time, I really enjoy polishing; I like this so much.
Craftsmanship work and selling stones to anywhere in the world—now let's get started, let's do the polishing
from the pavilion so you can see how some facets turned out square and others didn't, so here it is
It has a slightly reddish tint due to the glue, but it's not actually this color—the yellow glue is causing the appearance.
I played with the lilac and turned this color; I put it under the tree's shade without adding light for you
I'm really happy with how the pavilion turned out. I think it's going to create a great reflection back upwards.
Here, since the service is slow, you should center this—the protractor, when it is
A stone this complicated already, I'll apply the glue there and let it dry, because there's no need to touch it anymore.
Nothing is just to remove that other dry part, and then the other part right there will automatically become perfectly centered.
For you to do your job, tell me where you're watching this video from.
the city, state, or country because my videos go to several countries outside the United States
United for Japan, several European and Asian countries, South Korea—so tell me, where are you from?
watching this video, which is very important for me to understand where the work of a craftsman stands
Coming, coming, almost at the final part of making the facets here, I'll do it by hand, they're small
Here, the top part is ready, right? I'm just cleaning the table, it's all good, the table is clean
No problem now, I'm going to do the entire part, I'm going to show it to you—it's work, but it's one
The work is worth it—you'll ask for what you think your work is worth, isn't that right?
Any stone becomes a precious gem with patience, precision, and a simple amethyst you transform into a jewel.
That's great, it's ready. I've already taken it out; I'm going to put it up high and that's it, finished. That's the beginning I'm talking about.
I put the stone on a small piece of paper; you place it, you can't see the other side of the paper here.
It's the little stone she's going to make into a pendant—will this lady's granddaughter like it if it were for her?
You would be happy to receive a gift like this, leave it in the comments and I love doing this
I like to invent this, saying it's a one-of-a-kind piece, but now that it turned out so beautiful, it won't be unique anymore because
I've already copied it and I'm doing others when I find them really cool, I mark them all on a piece of paper.
notebook the right degrees, the exact size, and I'll make others here, I'll leave it running slowly underneath
from a little tree, the normal daylight, just a little bit of dim light beneath a shadow because
Otherwise, you won't be able to see the stone—it has a beautiful bluish-lilac and reddish hue.
This netizen left me, I thought you were great, leave your comments if you liked it, it's reached this far, leave a comment
Oh, like that's very important to strengthen my channel, I think it's going to make a beautiful pendant.
Without lighting, it's personal; I didn't add light at the very end, so she'll catch a little bit of it.
The reflection of light, so a piece of gold will be made to put on the gold chain, thanks, and if
Did you like it? Follow Adriano Precious Stones. Best regards until the next video, and there!
