5 Reasons To Light Films With Colour

Filmmaking Techniques
4 followers
Since the dawn of three-strip film in the 1930s, every cinematographer has been aware of the
importance of using colour to create images. Different palettes can be constructed by using
production design, introducing a look in the grade, or as we'll discuss today, with lighting.
There are many reasons to use different coloured lighting when you shoot a scene,
so today we'll go over five of them, by looking at a few clips from popular movies,
as well as some footage I've lit using different hues.
All of the lights I'll be using in this video are thanks to Nanlite, today's sponsor.
So let's get started.
Every environment that we walk around in has different frequencies of light bouncing around,
which to both our eyes and cameras alike, read as colour.
Therefore one of the most common motivations for illuminating with a vibrant hue,
is to replicate or supplement what we call practical sources,
lights that are seen within the frame of the shot, such as a lamp.
Here I've set the colour temperature of the practical in the background to 3200 Kelvin.
Then to increase its intensity and direction, I've added a film light rigged above as a backlight.
I've set it to the same colour temperature as the practical,
supplementing the warm light that already naturally exists in the frame.
A big trend now is for DPs to build practicals into sets or locations,
which are usually RGB so that they can be adjusted to different hues,
to add accents of colour to the lighting.
Those practicals could be Astera Titan tubes posing as fluorescent bulbs,
RGB strips built into signage or yellowly warm kitchen lights.
As well as adding coloured practical sources that can be seen in shots,
another idea linked to this is to create motivated colour lighting,
where the light isn't necessarily seen in the shot,
but the direction, colour and quality of the illumination still feels relatively
realistic and motivated, like that light could be there, just outside the shot.
One way to do this when shooting an interior is to shine a light through a window,
with the imaginary motivation for it being that there's some kind of street lamp outside that
window. Here I've used a hard source with a sodium vapour gel outside the window,
which gets cut into strips of light and shadow by shutters.
I've then used a cooler fill inside to motivate the dusky blue natural light outside,
and lift the ambience a bit.
So although we don't see the exact source of light in the shot,
it's probably within the bounds of reality to imagine that there might be an old sodium
vapour street lamp outside this apartment window. Creating these extra imaginary sources
is especially useful in night scenes for lifting the exposure so that there's enough
light to be able to shoot, but there are also other psychological motivations for lighting with colour.
When shooting exteriors or interior scenes that take place during the day,
the default colour temperature to light with and set the camera to is around 5600K.
If both the colour balance and light source match, you'll get normal looking natural colour,
with white surfaces reading as white. Some filmmakers like to use this look as a base
for daylight scenes, but then add smidges of more vivid colours to parts of the frame.
Now I can't speak to the intention behind these lighting choices,
but I have noticed that within certain contexts this can have an agitating effect.
Take this location from The Bear. In different scenes there's this ever-present just-off-camera
red light, which adds a different hue to the otherwise naturally lit space.
It's subtle, but to me this visually ratchets up the tension just a tad,
which suits the ongoing chaos and agitating tone that comes from the story and direction.
There's something about using a strong hue in contrast to the otherwise natural lighting,
especially when it hits the skin tone of a character, which is slightly off-putting and brash.
Uncut Gems is another film that does this, often mixing garish pink and off-green lighting
with more traditional CCT sources. This gives skin quite a sickly, unhealthy tone,
which psychologically adds to its already tense, off-kilter, chaotic atmosphere.
So far we've seen that lighting with colour can be done for motivational purposes,
or to induce a psychological feeling, but it can also be used for more classically
photographic or aesthetic reasons. More often than not cinematographers like to use lighting
to create different planes within the image. This creates an illusion that the 2D image has depth,
feels more dimensional, and can be used to separate characters from the background to
make them better stand out. They can do this by lighting different areas in the image,
such as the foreground and the background, with different amounts of light or with different
colours. The colours that cinematographers choose to place within the different planes of the image
are also quite deliberate. Complementary colours are hues that sit at opposite ends of each other
on the colour wheel. These tend to be quite visually pleasing to the eye when they are
paired together. This is why you often see films use a warm practical lamp in the background
that counteracts with the cooler light on the subject in the foreground.
Not only are these colours complementary and therefore aesthetically pleasing,
but they are also placed in different planes or dimensions in the image. Cool, warm and cool,
increasing the feeling of depth and breaking up the subject from blending into the background.
Some other complementary or often used colour combinations besides cool and warm include
a dark orange and green, red with a lighter blue or cyan, or a pink-purple with a tungsten yellow.
The lights I've been using to film the examples in this video have mainly been the Pavoslim 60C
and 120C, two new colour capable LED fixtures from today's sponsor Nanlite. These super lightweight
and thin yet durable panels are great for any kind of overhead rigging situation.
They come with an attached softbox which pops up to provide a diffuse spread to the source.
It can also be easily folded away to fit in the case which is a great time saver when lighting
on the go. They're fully RGB capable which means you can use them for a daylight or tungsten colour
balance, as well as dial in any colour of light you can imagine. Probably my favourite feature
is that they come with a pre-programmed selection of gel looks that mimic the colour that you'd get
from placing actual gels on a daylight or tungsten light. This allows me to quickly
scroll through and select gel colours that I often use on lights like Plus Green, Minus Green,
Sodium Vapor or CTS without needing to program in specific RGB values. A big time saver!
They're also compatible with the Nanlink app which means you can control these lights wirelessly
from the palm of your hand. Great for adjusting and balancing multiple fixtures quickly and
easily and dialing in specific colour values. This is an especially useful feature if your
lights need to be rigged up in hard to access spots. If you want to check out more of Nanlite's
great LED products, I've linked their site in the description below. There are many cinematographers
such as Vittorio Storaro who like to talk about the psychology of lighting with certain colours.
While the idea that different colours can be used to evoke specific emotions or themes is a whole
other subject on its own, I think it's safe to acknowledge that as a whole colour affects mood
and how images are experienced by audiences. For that reason cinematographers can sometimes
deliberately exaggerate colour outside the bounds of reality so that the world represents how the
rather than what it looks like in reality. This is something that DP Marcel Rev referred to as
emotional realism when shooting Euphoria. As an example let's take this bathroom space which in
real life is lit by a rather ugly overhead tungsten bulb and apply two different lighting
looks to it to evoke two different feelings. I'll start by rigging the 6DC on a pole cut
so that we don't see it in the reflection when shooting. It provides a nice downward top light
onto the subject. Then I'll place a second source so that it shines through the window adding
ambience and a different plane of light on the back wall. For the first lighter, brighter,
more upbeat tone and look I'll set the overhead source to a 5600K daylight temperature with a
layer of diffusion to soften its intensity. I'll set the outside hard COB light to 5600K
with an added quarter CTS gel to give it a warm morning glow. For the second harsher darker tone
I'll remove the diff on the 6DC to make the down light harder and set it to a fluorescent green gel
look. I'll then remove the CTS gel on the light outside and instead warm it up to 2700K so it
takes on a tungsten look. I'll then decrease the camera's exposure and balance the lights through
dimming their intensity values to get a look that feels much dingier and far emotionally darker in
tone than the first lighting setup. By just tweaking the colour, quality and intensity of
the two sources we can create two looks that put the character in a radically different emotional
space. Apart from all the above reasons for using colour, it can also be used because, well,
it just looks kinda cool. One of the easiest ways to create a more visually stylised look with
lighting is by using different hues. This is often done in short form content like music videos,
where realistic lighting can be thrown out the window and colour is used to elevate the visuals
and inject an energy into them, using a stylised colour palette rather than a naturalistic one.
It's also a favourite party trick of YouTubers. Light the background wall with one RGB colour,
then place another colour RGB source that only illuminates the subject in the foreground
and just like that you're a YouTuber. The reason this works comes back to the idea of using
complementary colour and lighting different planes in the frame to separate the subject
from the background. I'm sure there are lots of other reasons to use colour in lighting
which you can chat about down in the comments. As always, thanks for supporting the channel by
watching, liking and especially to the Patrons who keep this channel going with their support.
Otherwise, until next time, thanks for watching and goodbye.
